AS/NZS 3500.0:2003
AvailableSuperseded
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Plumbing and drainage Glossary of terms
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
12-15-2003
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.The Standard is primarily intended for the general water industry and covers water supply from the reticulation main into the premises, including hot water service systems, sanitary fixtures, drainage and their associated water and waste fittings, pipe systems and associated components.
| Committee |
WS-014
|
| DocumentType |
Standard
|
| ISBN |
0 7337 5524 0
|
| Pages |
66
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
Originated as AS 1355-1979.
Previous edition AS/NZS 3500.0:1995.
Third edition 2003.
| AS 4234-1994 | Solar water heaters - Domestic and heat pump - Calculation of energy consumption |
| AS 2345-2006 | Dezincification resistance of copper alloys |
| AS/NZS 3718:2005 | Water supply - Tap ware (Reconfirmed 2016) |
| AS/NZS 4445.1:1997 | Solar heating - Domestic water heating systems Performance rating procedure using indoor test methods |
| AS/NZS 4020:2002 | Testing of products for use in contact with drinking water |
| AS/NZS 3718:2003 | Water supply - Tap ware |
| AS 2984-1987 | Solar water heaters - Test for thermal performance - Outdoor test |
| AS 2345-1992 | Dezincification resistance of copper alloys |
| AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
| AS 2813-1985 | Solar water heaters - Method of test for thermal performance - Simulator method |
| ATS 5200.469-2005 | Technical Specification for plumbing and drainage products Waterless or limited flush urinals - With an integral sealing device |
| AS 1631-1994 | Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018) |
| ATS 5200.016-2010 | Technical Specification for plumbing and drainage products Cistern inlet valves |
| ATS 5200.006-2004 | Technical Specification for plumbing and drainage products Reflux valves - sewerage |
| AS 5200.458-2008 | Plumbing and drainage products Universal plastic-bodied transition couplings |
| AS 2118.5-1995 | Automatic fire sprinkler systems - Domestic |
| AS 1281-2001 | Cement mortar lining of steel pipes and fittings (Reconfirmed 2018) |
| ATS 5200.453-2004 | Technical Specification for plumbing and drainage products Heated water systems - Thermostatic circulation valve |
| AS 2118.3-2010 | Automatic fire sprinkler systems Deluge systems |
| AS 3517-2007 | Capillary fittings of copper and copper alloy for non-pressure sanitary plumbing applications (Reconfirmed 2018) |
| AS 4553-2008 | Gas space heating appliances |
| AS/NZS 3500.4:2015 | Plumbing and drainage Heated water services |
| ATS 5200.047-2005 | Technical Specification for plumbing and drainage products Self-sealing devices |
| ATS 5200.499-2008 | Technical Specification for plumbing and drainage products Inline sewer dosing unit (SDU) |
| AS 5200.000-2006 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018) |
| AS/NZS 1477:2017 | PVC pipes and fittings for pressure applications |
| AS/NZS 3500.2:2018 | Plumbing and drainage Sanitary plumbing and drainage |
| AS/NZS 1254:2010 | PVC-U pipes and fittings for stormwater and surface water applications (Reconfirmed 2024) |
| AS/NZS 2982:2010 | Laboratory design and construction |
| AS/NZS 6400:2005 | Water efficient products - Rating and labelling |
| ATS 5200.004-2005 | Technical Specification for plumbing and drainage products Urinal flushing cisterns |
| ATS 5200.051-2005 | Technical Specification for plumbing and drainage products Bidet douche seats |
| ATS 5200.460-2005 | Technical Specification for plumbing and drainage products Grey water diversion device (GWDD) |
| AS/NZS 2492:2007 | Cross-linked polyethylene (PE-X) pipes for pressure applications |
| AS/NZS 1546.3:2008 | On-site domestic wastewater treatment units Aerated wastewater treatment systems |
| AS 1357.1-2004 | Valves primarily for use in heated water systems Protection valves |
| AS 3500.2.1-1996 | National Plumbing and Drainage Sanitary plumbing and drainage - Performance requirements |
| AS 1172.5:2019 | Sanitary plumbing products Baths for ablutionary purposes |
| AS 4796:2016 | Water supply - Metal-bodied and plastic-bodied ball valves for property service connection |
| AS 2845.3-2010 | Water supply - Backflow prevention devices Field testing and maintenance of testable devices |
| ATS 5200.042-2004 | Technical Specification for plumbing and drainage products - Roll-grooved jointing systems |
| AS/NZS 2845.1:2010 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS/NZS 3518:2013 | Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications (Reconfirmed 2024) |
| AS 5200.037.2-2008 | Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016) |
| ATS 5200.490-2007 | Technical Specification for plumbing and drainage products Cross-linked polyethylene/ aluminium/polyethylene-composite pipe systems for pressure applications (Reconfirmed 2018) |
| AS 3795-1996 | Copper alloy tubes for plumbing and drainage applications |
| AS/NZS 3499:2006 | Water supply - Flexible hose assemblies (Reconfirmed 2016) |
| AS/NZS 3500.1:2018 | Plumbing and drainage Water Services |
| AS 4118.1.2-1996 | Fire sprinkler systems Components - Alarm valves (wet) (Reconfirmed 2013) |
| ATS 5200.040-2005 | Waste pipe connection outlets and gratings, separate or integral |
| AS 4139-2003 | Fibre-reinforced concrete pipes and fittings (Reconfirmed 2018) |
| AS 4563-2004 | Commercial catering gas equipment (Reconfirmed 2016) |
| AS 1546.3:2017 | On-site domestic wastewater treatment units Secondary treatment systems |
| AS/NZS 3662:2005 | Performance of showers for bathing |
| AS/NZS 3690:2009 | Installation of ABS pipe systems (Reconfirmed 2024) |
| AS/NZS 2642.2:1994 | Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications |
| AS 2118.2-2010 | Automatic fire sprinkler systems Drencher systems |
| AS 4125.1-2009 | Sound laboratory practice in food and water microbiology laboratories - Premises, safety, sample management, regulatory compliance and record management |
| ATS 5200.020-2004 | Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply |
| ATS 5200.050-2005 | Technical Specification for plumbing and drainage products Prefabricated bathroom modules |
| ATS 5200.104-2005 | Appliances (miscellaneous) |
| AS 5830.1-2012 | In-line ball valves for use in plumbing water supply systems Metal-bodied |
| AS 4558-2011 | Decorative gas log and other fuel effect appliances |
| ATS 5200.461-2004 | Technical Specification for plumbing and drainage products Stainless steel tubes and mechanical compression fittings for pressure applications |
| AS 4032.1-2005 | Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements |
| ATS 5200.055-2008 | Technical specifications for plumbing and drainage products Plastics fittings - Connectors with flexible intermediate joints for drainage and sewerage applications |
| ATS 5200.468-2005 | Technical Specification for plumbing and drainage products Hot water systems - Recirculation valves |
| AS 3688:2016 | Water supply and gas systems - Metallic fittings and end connectors |
| AS 1172.2:2014 | Sanitary plumbing products Flushing devices and cistern inlet and outlet valves |
| AS/NZS 2033:2008 | Installation of polyethylene pipe systems |
| ATS 5200.028-2004 | Technical Specification for plumbing and drainage products - Commercial food waste disposal unit |
| AS/NZS 3500.5:2012 | Plumbing and drainage Housing installations |
| AS/NZS 1730:1996 | Washbasins |
| AS 1172.1-2005 | Water closets (WC) Pans |
| ATS 5200.017-2005 | Technical Specification for plumbing and drainage products Cistern outlet valves |
| AS 4118.1.6-1995 | Fire sprinkler systems Components - Stop valves and non-return valves (Reconfirmed 2013) |
| ATS 5200.464-2004 | Technical Specification for plumbing and drainage products - Hot water manual or sensor-activated pumping systems |
| AS 4032.2-2005 | Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices (Reconfirmed 2015) |
| ATS 5200.471-2005 | Technical specification for plumbing and drainage products Stainless steel tubes and mechanical compression fittings for pressure applications - Alternative systems |
| AS/NZS 3879:2006 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings |
| AS/NZS 3500.4:2003 | Plumbing and drainage Heated water services |
| AS/NZS 3500.2:2003 | Plumbing and drainage Sanitary plumbing and drainage |
| AS/NZS 3500.2.2:1996 | National plumbing and drainage Sanitary plumbing and drainage - Acceptable solutions |
| ATS 5200.425-2009 | Technical Specification for plumbing and drainage products Water closet (WC) suite with integral odour control device (OCD) connected to sanitary plumbing and drainage system |
| AS 4118.1.5-1996 | Fire sprinkler systems Components - Deluge and pre-action valves (Reconfirmed 2013) |
| AS 3565.1-2010 | Meters for cold and heated drinking and non-drinking water supplies Technical requirements (Reconfirmed 2021) |
| AS/NZS 4765:2007 | Modified PVC (PVC-M) pipes for pressure applications |
| AS 5082.2-2007 | Polybutylene (PB) plumbing pipe systems - Metric series Mechanical and fusion jointing systems (Reconfirmed 2017) |
| ATS 5200.476-2006 | Technical Specification for plumbing and drainage products Heated water systems - Leak protection device |
| AS/NZS 1260:2009 | PVC-U pipes and fittings for drain, waste and vent application |
| AS/NZS 1260:2017 | PVC-U pipes and fittings for drain, waste and vent applications |
| MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
| AS/NZS 2544:1995 | Grey iron pressure fittings |
| AS/NZS 3879:2011 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings |
| AS 1357.2-2005 | Valves primarily for use in heated water systems Control valves (Reconfirmed 2015) |
| AS/NZS 2023:1995 | Baths for ablutionary purposes |
| AS 1628-1999 | Water supply - Metallic gate, globe and non-return valves (Reconfirmed 2015) |
| AS/NZS 3500.3:2003 | Plumbing and drainage Stormwater drainage |
| HB 230-2008 | Rainwater Tank Design and Installation Handbook |
| AS/NZS 1477:2006 | PVC pipes and fittings for pressure applications |
| ATS 5200.014-2004 | Technical Specification for plumbing and drainage products - Jointing materials |
| ATS 5200.478-2006 | Technical Specification for plumbing and drainage products Cross-linked polyethylene/Aluminium/Cross-linked polyethylene macro-composite pipe systems for pressure applications |
| AS 4118.1.7-1996 | Fire sprinkler systems Components - Alarm valves (dry) (Reconfirmed 2013) |
| ATS 5200.037.2-2005 | Technical Specification for plumbing and drainage products Flow controllers - For use in heated or cold water plumbing systems |
| AS/NZS 2642.1:2007 | Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe extrusion compounds (Reconfirmed 2024) |
| AS 4321-2001 | Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings (Reconfirmed 2019) |
| AS/NZS 2041.1:2011 | Buried corrugated metal structures Design methods |
| AS 1172.1:2014 | Sanitary plumbing products Water closet pans |
| ATS 5200.420-2005 | Technical Specification for plumbing and drainage products Trap-priming valves |
| ATS 5200.037-2004 | Technical Specification for plumbing and drainage products - Flow controllers |
| AS 2118.6-1995 | Automatic fire sprinkler systems - Combined sprinkler and hydrant |
| ATS 5200.477-2006 | Technical Specification for plumbing and drainage products Rainwater/mains supply changeover devices |
| AS/NZS 3518:2004 | Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications |
| AS 2118.4-2012 | Automatic fire sprinkler systems Sprinkler protection for accommodation buildings not exceeding four storeys in height |
| AS 2887-1993 | Plastic waste fittings |
| ATS 5200.007-2004 | Technical Specification for plumbing and drainage products - Water hammer arrestors |
| AS 1756-1999 | Household sinks |
| ATS 5200.489-2009 | Technical Specification for plumbing and drainage products Stainless steel flexible assemblies for plumbing applications |
| ATS 5200.501-2011 | Technical Specification for plumbing and drainage products Anti-infiltration overflow-relief device |
| ATS 5200.103-2004 | Technical Specification for plumbing and drainage products - Water treatment systems (other than those specified in AS/NZS 3497) |
| ATS 5200.459-2004 | |
| AS/NZS 2041.2:2011 | Buried corrugated metal structures Installation |
| ATS 5200.037.1-2006 | |
| ATS 5200.501-2009 | Technical Specification for plumbing and drainage products Anti-infiltration overflow relief point |
| AS 3861-1991 | Spa baths (Reconfirmed 2016) |
| AS 4176.2-2010 | Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD) (Reconfirmed 2022) |
| AS 4556-2011 | Indirect gas-fired ducted air heaters |
| AS 2845.2-1996 | Water supply - Backflow prevention devices Air gaps and break tanks |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS 4176-1994 | Polyethylene/aluminium and cross-linked polyethylene/aluminium macro-composite pipe systems for pressure applications |
| AS 1546.4:2016 | On-site domestic wastewater treatment units Domestic greywater treatment systems |
| HB 326-2008 | Urban Greywater Installation Handbook for Single Households |
| AS/NZS 1229:2002 | Laundry troughs and tubs |
| ATS 5200.101-2005 | Appliances (low hazard rating) |
| ATS 5200.030-2012 | Technical Specification for plumbing and drainage products Solenoid valves |
| AS 2118.10-1995 | Automatic fire sprinkler systems Approval documentation (Reconfirmed 2013) |
| AS 5200.000-2005 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products |
| AS/NZS 3718:2005 | Water supply - Tap ware (Reconfirmed 2016) |
| AS 2118.2-1995 | Automatic fire sprinkler systems - Wall wetting sprinklers (Drenchers) |
| AS 1172.4:2019 | Sanitary plumbing products Washbasins |
| AS/NZS 4158:2003 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes (Reconfirmed 2015) |
| ATS 5200.021-2004 | Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with break tank supply |
| ATS 5200.467-2004 | Technical Specification for plumbing and drainage products Rainwater tank connection valve |
| ATS 5200.482-2006 | Technical Specification for plumbing and drainage products Soil waste dump fitting |
| AS 3600:2018 | Concrete structures |
| ATS 5200.026-2004 | Technical Specification for plumbing and drainage products Cold water storage tanks |
| ATS 5200.466-2004 | Technical Specification for plumbing and drainage products - Rainwater tank connection devices |
| AS/NZS 2280:2004 | Ductile iron pipes and fittings |
| AS/NZS 1254:2002 | PVC pipes and fittings for storm and surface water applications |
| HB 230-2006 | Rainwater Tank Design and Installation Handbook |
| ATS 5200.472-2006 | Technical Specification for plumbing and drainage products Heated water system recirculation device |
| AS 4809:2017 | Copper pipe and fittings - Installation and commissioning |
| AS/NZS 2642.3:1994 | Polybutylene pipe systems Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications |
| ATS 5200.473-2007 | Stainless steel/nano-antibiotic PP-R pipe systems for water supply applications |
| AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
| AS/NZS 2243.3:2010 | Safety in laboratories Microbiological safety and containment |
| AS/NZS 3982:1996 | Urinals |
| ATS 5200.053-2006 | Technical Specification for plumbing and drainage products Stainless steel pipes and tubes |
| AS 5082.1-2007 | Polybutylene (PB) plumbing pipe systems - Metric series Metric polybutylene (PB) pipes for hot and cold water applications (Reconfirmed 2017) |
| AS 1910-2004 | Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016) |
| AS 5100.5:2017 | Bridge design Concrete |
| AS/NZS 5065:2005 | Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017) |
| AS 1172.2-1999 | Water closet (WC) pans of 6/3 L capacity or proven equivalent Cisterns |
| AS 2537-1994 | Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications |
| AS 4032.4:2014 | Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures |
| AS 4198-1994 | Precast concrete access chambers for sewerage applications |
| ATS 5200.012-2005 | Technical Specification for plumbing and drainage products In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic |
| AS 2118.4-1995 | Automatic fire sprinkler systems - Residential |
| AS/NZS 2845.3:2020 | Water supply - Backflow prevention devices Field testing and maintenance of testable devices |
| ATS 5200.105-2005 | |
| AS/NZS 4348:1995 | Water supply - Domestic type water treatment appliances - Performance requirements |
| ATS 5200.046-2005 | Technical Specification for plumbing and drainage products Diversion systems - Wash down and first flush |
| ATS 5200.491-2010 | Technical Specification for plumbing and drainage products Aluminium alloy piping system with plastics lining for plumbing water service applications |
| AS/NZS 2280:2014 | Ductile iron pipes and fittings |
| ATS 5200.016-2005 | Technical Specification for plumbing and drainage products - Cistern inlet valves |
| AS/NZS 6400:2016 | Water efficient products - Rating and labelling |
| AS/NZS 2280:2020 | Ductile iron pipes and fittings |
| AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS/NZS 4131:2010 | Polyethylene (PE) compounds for pressure pipes and fittings (Reconfirmed 2022) |
| AS/NZS 3497:1998 | Drinking water treatment units - Plumbing requirements |
| AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS 4551-2008 | Domestic gas cooking appliances |
| AS 2845.3-1993 | Water supply - Backflow prevention devices Field testing and maintenance |
| ATS 5200.475-2006 | Technical Specification for plumbing and drainage products Heated Water Systems - Cold water recovery device |
| ATS 5200.463-2005 | Positive air pressure attenuator |
| AS 1357.1-2009 | Valves primarily for use in heated water systems Protection valves |
| ATS 5200.481-2006 | Technical Specification for plumbing and drainage products Thermal switching valves |
| AS 4032.3-2004 | Water supply - Valves for the control of heated water supply temperatures Requirements for field-testing, maintenance or replacement of thermostatic mixing valves, tempering valves and end-of-line temperature control devices |
| AS 4643-2007 | Overhead radiant tube gas heaters |
| AS/NZS 3500.4:2018 | Plumbing and drainage Heated water services |
| ATS 5200.006-2005 | Technical Specification for plumbing and drainage products Reflux valves - Sewerage |
| AS 5200.007-2008 | Plumbing and drainage products Metal-bodied water hammer arresters |
| AS 3588-1996 | Shower bases and shower modules (Reconfirmed 2016) |
| AS/NZS 1516:1994 | The cement mortar lining of pipelines in situ (Reconfirmed 2020) |
| AS 5200.053-2008 | Plumbing and drainage products Stainless steel pipes and tubes for pressure applications |
| AS 4118.2.1-1995 | Fire sprinkler systems Piping - General (Reconfirmed 2013) |
| AS/NZS 3500.1:2003 | Plumbing and drainage Water services |
| ATS 5200.462-2004 | Technical Specification for plumbing and drainage products Rainwater tank connection valve |
| AS 3498-2009 | Authorization requirements for plumbing products - Water heaters and hot-water storage tanks |
| AS 4552-2005 | Gas fired water heaters for hot water supply and/or central heating |
| AS/NZS 4129:2008 | Fittings for polyethylene (PE) pipes for pressure applications |
| ATS 5200.052-2005 | Metallic-bodied inlet pressure control valves greater than DN 50 |
| AS 1172.3:2019 | Sanitary plumbing products Personal hygiene fixtures and appliances - Bidets and bidettes |
| ATS 5200.479-2006 | Flood stop safety valve |
| AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS 3498:2020 | Safety and public health requirements for plumbing products - Water heaters and hot-water storage tanks |
| ATS 5200.030-2004 | Technical Specification for plumbing and drainage products - Solenoid valves |
| AS/NZS 2642.2:2008 | Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe for hot and cold water applications (Reconfirmed 2022) |
| AS 3498-2003 | Authorization requirements for plumbing products - Water heaters and hot-water storage tanks |
| AS/NZS 2041:1998 | Buried corrugated metal structures |
| AS 3688-2005 | Water supply - Metallic fittings and end connectors |
| AS 1589-2001 | Copper and copper alloy waste fittings (Reconfirmed 2018) |
| ATS 5200.030-2007 | Technical Specification for plumbing and drainage products Solenoid valves |
| AS 5830.2-2012 | In-line ball valves for use in plumbing water supply systems Plastics-bodied |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
| ATS 5200.485-2006 | Pressure compensating tank |
| AS/NZS 2280:2012 | Ductile iron pipes and fittings |
| AS 1579-2001 | Arc-welded steel pipes and fittings for water and wastewater (Reconfirmed 2018) |
| AS 4118.1.3-1995 | Fire sprinkler systems Components - Water motor alarms (Reconfirmed 2013) |
| ATS 5200.486-2008 | Technical Specification for plumbing and drainage products Sprinklers for home applications |
| AS/NZS 1260:2002 | PVC-U pipes and fittings for drain, waste and vent application |
| ATS 5200.458-2004 | Technical Specification for plumbing and drainage products Universal transition fitting |
| AS/NZS 4130:2009 | Polyethylene (PE) pipes for pressure applications |
| AS 2419.1-2005 | Fire hydrant installations System design, installation and commissioning |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.