AS/NZS 3499:2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Water supply - Flexible hose assemblies (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
05-29-2024
10-04-2006
Specifies requirements for flexible hose assemblies for use with both heated and cold water supplies with a maximum heated water temperature of 90 degrees Celsius, used for applications aboveground, accessible and not submerged. Nominal sizes range up to DN 20, a maximum length of 2 m and with a working pressure not exceeding 1.4 MPa at 20 degrees Celsius.
Committee |
WS-001
|
DocumentType |
Standard
|
ISBN |
0 7337 7756 2
|
Pages |
17
|
ProductNote |
Reconfirmed 23/12/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 23/12/2016
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard specifies requirements for flexible hose assemblies for use with both heated water and cold-water supplies with a maximum heated water temperature of 90°C used for applications aboveground, accessible and not submerged. Nominal sizes range up to DN 20, a maximum length of 2 m and with a working pressure not exceeding 1.4 MPa at 20Degrees Celsius. NOTE: Certification under the Plumbing Code of Australia is mandatary in Australia but not in New Zealand.
Originated in Australia as AS 3499-1992.
Second Edition 1995.
Jointly revised and designated AS/NZS 3499:1997.
Second Edition 2006.
Reissued incorporating Amendment No. 1 (July 2009).
AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
AS 1683.1-2002 | Methods of test for elastomers Rubber latex - Sampling |
AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
AS/NZS 1568:1998 | Copper and copper alloys - Forging stock and forgings |
AS 1769-1975 | Welded stainless steel tubes for plumbing applications (Reconfirmed 2018) |
AS/NZS 4020:2005 | Testing of products for use in contact with drinking water |
AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
AS 3688-2005 | Water supply - Metallic fittings and end connectors |
AS/NZS 3707:2001 | Method for testing pressure cycling resistance of pipes and fittings |
AS 1572-1998 | Copper and copper alloys - Seamless tubes for engineering purposes (Reconfirmed 2018) |
AS 2136-1977 | Method for detecting the susceptibility of copper and its alloys to stress corrosion cracking using the mercurous nitrate test (Reconfirmed 2018) |
AS 2831-1985 | Thermometers - Solid stem - Long and short - For precision use |
AS 1349-1986 | Bourdon tube pressure and vacuum gauges (Reconfirmed 2018) |
AS 2345-2006 | Dezincification resistance of copper alloys |
AS 2738-2000 | Copper and copper alloys - Compositions and designations of refinery products, wrought products, ingots and castings (Reconfirmed 2018) |
AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
AS 2837-1986 | Wrought alloy steels - Stainless steel bars and semi-finished products |
AS 1172.2:2014 | Sanitary plumbing products Flushing devices and cistern inlet and outlet valves |
MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
AS/NZS 3718:2005 | Water supply - Tap ware (Reconfirmed 2016) |
AS 4775-2007 | Emergency eyewash and shower equipment |
AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
AS/NZS 3497:1998 | Drinking water treatment units - Plumbing requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.