AS/NZS 2311:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Guide to the painting of buildings
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
02-22-2023
Superseded by
Language(s)
English
Published date
03-23-2009
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.This Standard provides a guide to products and procedures for the painting of buildings for general domestic, commercial and industrial use.
| Committee |
CH-003
|
| DocumentType |
Standard
|
| ISBN |
0 7337 9054 2
|
| Pages |
108
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard provides a guide to products and procedures for the painting of buildings for general domestic, commercial and industrial use.The Standard does not include a specific recommendation for the long-term protection of iron or steel exposed directly to the atmosphere or to internal climates likely to have aggressive environments which are dealt with in AS/NZS 2312.
Originated in Australia as AS 2311 1979.
Originated in New Zealand as NZS 7703 1985.
Previous edition AS/NZS 2311:2000.
Fifth edition 2009.
| AS 3730.22-2006 | Guide to the properties of paints for buildings Concrete and masonry sealer - Solvent-borne - Interior/exterior |
| AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
| AS 3730.5-2006 | Guide to the properties of paints forbuildings Solvent-borne - Interior - Semi-gloss (Reconfirmed 2016) |
| AS 3730.28-2006 | Guide to the properties of paints for buildings Wood stain - Solvent-borne - Exterior |
| AS 3715-2002 | Metal finishing - Thermoset powder coatings for architectural applications of aluminium and aluminium alloys |
| AS 3730.27-2006 | Guide to the properties of paints for buildings Clear coatings for interior timber floors |
| AS/NZS 3750.5:2008 | Paints for steel structures Acrylic full gloss (two-pack) (Reconfirmed 2020) |
| AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
| AS 3730.29-2006 | Guide to the properties of paints for buildings Solvent-borne - Exterior/interior - Paving paint (Reconfirmed 2016) |
| AS/NZS 3750.6:1995 | Paints for steel structures - Full gloss polyurethane (two-pack) |
| AS/NZS 3750.17:1998 | Paints for steel structures Etch primers (single pack and two-pack) (Reconfirmed 2013) |
| AS/NZS 2430.3.1:2004 | Classification of hazardous areas Examples of area classification - General |
| AS/NZS 2865:2001 | Safe working in a confined space |
| AS/NZS 2430.3.9:2004 | Classification of hazardous areas Examples of area classification - Miscellaneous |
| AS/NZS 2430.3.3:2004 | Classification of hazardous areas Examples of area classification - Flammable liquids |
| AS 3730.7-2006 | Guide to the properties of paints for buildings Latex - Exterior - Flat |
| AS 3730.14-2006 | Guide to the properties of paints for buildings Undercoat - Solvent-borne - Interior/exterior |
| AS 3730.1-2006 | Guide to the properties of paints for buildings Latex - Interior - Flat (Reconfirmed 2016) |
| AS/NZS 1680.1:2006 | Interior and workplace lighting General principles and recommendations |
| AS 1940-2004 | The storage and handling of flammable and combustible liquids |
| AS 3750.10-2008 | Paints for steel structures Full gloss epoxy (two-pack) (Reconfirmed 2019) |
| AS/NZS 2728:2007 | Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements |
| AS/NZS 1580.601.1:1995 | Paints and related materials - Methods of test Colour - Visual comparison (Reconfirmed 2013) |
| AS/NZS 1716:2003 | Respiratory protective devices |
| AS 1604.1-2005 | Specification for preservative treatment Sawn and round timber |
| AS/NZS 4548.3:1999 | Guide to long-life coatings for concrete and masonry Latex - Textured coatings - Non-aggregate (Reconfirmed 2013) |
| AS 3730.8-2006 | Guide to the properties of paints for buildings Latex - Exterior - Low-gloss (Reconfirmed 2016) |
| AS 3730.6-2006 | Guide to the properties of paints for buildings Solvent-borne - Interior/exterior - Full gloss enamel (Reconfirmed 2016) |
| AS 3730.25-2006 | Guide to the properties of paints for buildings Clear finish - Solvent-borne - Interior (Reconfirmed 2016) |
| AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
| AS 3730.18-2006 | Guide to the properties of paints for buildings Undercoat/sealer - Latex - Interior/exterior |
| AS 3730.12-2006 | Guide to the properties of paints for buildings Latex - Interior - Gloss |
| AS 3730.0-2006 | Guide to the properties of paints for buildings General information on the specification, purchasing and testing of paints |
| AS/NZS 4548.2:1999 | Guide to long-life coatings for concrete and masonry Latex finish coatings - High-build, low profile (Reconfirmed 2013) |
| AS 1897-1976 | Electroplated coatings on threaded components (metric coarse series) |
| AS 3730.16-2006 | Guide to the properties of paints for buildings Latex - Self-priming timber finish - Exterior |
| AS 3730.15-2006 | Guide to the properties of paints for buildings Primer - Latex - For metallic zinc surfaces |
| AS 4506-2005 | Metal finishing - Thermoset powder coatings (Reconfirmed 2017) |
| AS/NZS 2430.3.6:2004 | Classification of hazardous areas Examples of area classification - Laboratories, including fume cupboards and flammable medical agents |
| AS/NZS 2430.3.2:2004 | Classification of hazardous areas - Examples of area classification - Vehicle workshops, vehicle parking, fuel dispensing stations and aircraft hangars |
| AS 3730.21-2006 | Guide to the properties of paints for buildings Primer - Solvent-borne - For ferrous metallic surfaces |
| AS 1580.408.5-2006 | Paints and related materials - Methods of test Adhesion - Pull-off test |
| AS 1345-1995 | Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018) |
| AS 4361.2-1998 | Guide to lead paint management Residential and commercial buildings |
| AS 3730.2-2006 | Guide to the properties of paints for buildings Latex - Interior - Semi-gloss (Reconfirmed 2016) |
| AS/NZS 2430.3.7:2004 | Classification of hazardous areas Examples of area classification - Landfill gas, sewage treatment and sewage pumping plants |
| AS/NZS 1580.457.1:1996 | Paints and related materials - Methods of test Resistance to natural weathering (Reconfirmed 2013) |
| AS/NZS 1530.3:1999 | Methods for fire tests on building materials, components and structures Simultaneous determination of ignitability, flame propagation, heat release and smoke release (Reconfirmed 2016) |
| AS 1580.401.5-2002 | Paints and related materials - Methods of test Hard dry condition - Sanding test |
| AS 1580.408.2-2004 | Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019) |
| AS/NZS 4548.4:1999 | Guide to long-life coatings for concrete and masonry Latex - Textured coatings - Aggregate-filled |
| HB 84-2006 | Guide to Concrete Repair and Protection |
| AS 1580.408.4-2004 | Paints and related materials - Methods of test Adhesion (crosscut) (Reconfirmed 2019) |
| AS 1318-1985 | Use of colour for the marking of physical hazards and the identification of certain equipment in industry (known as the SAA Industrial Safety Colour Code) |
| AS/NZS 1580.602.2:1995 | Paints and related materials - Methods of test Measurement of specular gloss of non-metallic paint films at 20°, 60° and 85° (Reconfirmed 2013) |
| AS/NZS 4548.1:1999 | Guide to long-life coatings for concrete and masonry Wall coatings - Latex extensible (Reconfirmed 2013) |
| AS/NZS 2430.3.5:2004 | Classification of hazardous areas Examples of area classification - Refineries and major processing plants |
| AS/NZS 2430.3.8:2004 | Classification of hazardous areas Examples of area classification - Surface coatings and adhesives |
| AS 3730.13-2006 | Guide to the properties of paints for buildings Primer - Wood - Solvent-borne - Interior/exterior (Reconfirmed 2016) |
| AS/NZS 2589.1:1997 | Gypsum linings in residential and light commercial construction - Application and finishing Gypsum plasterboard |
| AS 1789-2003 | Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017) |
| AS 3730.9-2006 | Guide to the properties of paints for buildings Latex - Exterior - Semi-gloss |
| AS 2700-1996 | Colour Standards for general purposes - Swatches |
| AS/NZS 2633:1996 | Guide to the specification of colours (Reconfirmed 2013) |
| AS 3730.10-2006 | Guide to the properties of paints for buildings Latex - Exterior - Gloss (Reconfirmed 2016) |
| AS/NZS 4792:2006 | Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017) |
| AS/NZS 4791:2006 | Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017) |
| AS/NZS 2430.3.4:2004 | Classification of hazardous areas Examples of area classification - Flammable gases |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS 4773.2-2010 | Masonry in small buildings - Construction |
| AS 3700-2011 | Masonry structures |
| AS 4773.1-2010 | Masonry in small buildings Design |
| WS14-2012 | Timber in Internal Design |
| WS13-2012 | Finishing Timber Externally |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.