AS/NZS 2243.5:2004
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety in laboratories Non-ionizing radiations - Electromagnetic, sound and ultrasound
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
04-11-2024
English
03-04-2004
Specifies requirements and recommendations to prevent accidents in laboratories when using equipment generating non-ionizing radiations including sound and ultrasound.
Committee |
CH-026
|
DocumentType |
Standard
|
ISBN |
0 7337 5665 4
|
Pages |
36
|
ProductNote |
Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This Standard—(a) provides information on non-ionizing radiations encountered in laboratories and the associated hazards; and(b) specifies requirements and gives recommendations in order to prevent injury by these radiations or by other hazards associated with their use. This Standard does not contain an exhaustive treatment of usage and safety requirements for non-ionizing radiations and reference should be made to other appropriate documents. NOTES: 1 This Standard does not cover field work performed outside the laboratory or exposure of persons to non-ionizing radiations for medical purposes. 2 This Standard does not cover requirements for medical examinations for laboratory personnel who may be exposed to non-ionizing radiations. Such medical examinations may be designated in codes of practice, other Standards or the requirements of the regulatory authorities. 3 The wavelength band designations given in this Standard are approximate and reflect the conventions used within the referenced literature. 4 Appendix A provides a schematic arrangement of the non-ionizing electromagnetic spectrum. 5 Appendix B provides advisory material dealing with optical fibre systems. 6 Appendix C provides a listing of documents giving other information on non-ionizing radiations.
Originated as AS 2243.5-1980.
Previous edition AS 2243.5-1993.
Jointly revised and designated AS/NZS 2243.5:2004.
AS/NZS 1680.1:2006 | Interior and workplace lighting General principles and recommendations |
AS 3665-1989 | Simplified definitions of lighting terms and quantities |
AS/NZS 3200.2.22:1997 | Approval and test specification - Medical electrical equipment Particular requirements for safety - Diagnostic and therapeutic laser equipment |
AS/NZS 1680.2.5:1997 | Interior lighting - Hospital and medical tasks |
AS/NZS 1269.3:2005 | Occupational noise management Hearing protector program |
AS/NZS 2604:1998 | Sunscreen products - Evaluation and classification |
AS/NZS 1269.2:1998 | Occupational noise management - Noise control management |
AS/NZS 2211.2:2006 | Safety of laser products Safety of optical fibre communication systems (OFCS) |
AS 1680.2.1-1993 | Interior lighting Circulation spaces and other general areas |
AS 3200.2.3-1992 | Approval and test specification - Medical electrical equipment Particular requirements for safety - Short-wave therapy equipment |
AS 1216-2006 | Class labels for dangerous goods |
AS/NZS 1680.2.4:1997 | Interior lighting Industrial tasks and processes |
AS/NZS 4173:2004 | Guide to the safe use of lasers in health care |
AS 1680.2.2-1994 | Interior lighting Office and screen-based tasks |
AS/NZS 1269.1:2005 | Occupational noise management Measurement and assessment of noise immission and exposure (Reconfirmed 2016) |
AS 1680.2.3-1994 | Interior lighting Educational and training facilities |
AS/NZS 3200.2.5:2002 | Medical electrical equipment Particular requirements for safety - Ultrasonic physiotherapy equipment (IEC 60601-2-5:2000, MOD) |
AS 1259.1-1990 | Acoustics - Sound level meters Non-integrating |
AS/NZS 2211.2:1997 | Laser safety Safety of optical fibre communication systems |
AS/NZS 3350.2.25:2001 | Safety of household and similar electrical appliances Particular requirements for microwave ovens (IEC 60335-2-25:1996, MOD) |
AS/NZS 1269.0:1998 | Occupational noise management Overview |
AS/NZS 3200.2.6:2005 | Medical electrical equipment Particular requirements for safety - Microwave therapy equipment (IEC 60601-2-6:1984, MOD) |
AS/NZS 1336:1997 | Recommended practices for occupational eye protection |
AS 1216-1995 | Class labels for dangerous goods |
AS 1885.1-1990 | Measurement of occupational health and safety performance Describing and reporting occupational injuries and disease, known as the Workplace injury and disease recording standard |
AS 1259.2-1990 | Acoustics - Sound level meters Integrating - Averaging |
AS 1633-1985 | Acoustics - Glossary of terms and related symbols |
AS/NZS 1338.2:1992 | Filters for eye protectors Filters for protection against ultraviolet radiation |
AS/NZS 2211.1:1997 | Laser safety Equipment classification, requirements and user’s guide |
AS/NZS 1269.2:2005 | Occupational noise management Noise control management (Reconfirmed 2016) |
AS 1319-1994 | Safety signs for the occupational environment (Reconfirmed 2018) |
AS 1852.845-1989 | International electrotechnical vocabulary - Lighting |
AS 2659.2-1983 | Guide to the use of sound measuring equipment - Portable equipment for integration of sound signals |
AS/NZS 1338.1:1992 | Filters for eye protectors Filters for protection against radiation generated in welding and allied operations |
AS/NZS 1269.3:1998 | Occupational noise management - Hearing protector program |
AS/NZS 1269.1:1998 | Occupational noise management - Measurement and assessment of noise immission and exposure |
AS 2659.1-1988 | Guide to the use of sound measuring equipment - Portable sound level meters |
AS/NZS 1269.4:2005 | Occupational noise management Auditory assessment |
AS 2533-2002 | Acoustics - Preferred frequencies and band centre frequencies |
AS/NZS 2211.1:2004 | Safety of laser products Equipment classification, requirements and user’s guide (IEC 60825-1:2001, MOD) |
AS/NZS 2107:2000 | Acoustics - Recommended design sound levels and reverberation times for building interiors |
AS/NZS 1269.4:1998 | Occupational noise management - Auditory assessment |
AS/NZS 1338.3:1992 | Filters for eye protectors Filters for protection against infra-red radiation |
AS/NZS 1269.0:2005 | Occupational noise management Overview and general requirements (Reconfirmed 2016) |
AS 3641.2-1999 | Recommended practice for atomic emission spectrometric analysis Inductively coupled plasma excitation |
AS/NZS 1269.1:2005 | Occupational noise management Measurement and assessment of noise immission and exposure (Reconfirmed 2016) |
AS 1774.36-2009 | Refractories and refractory materials - Physical test methods Determination of resistance to explosive spalling |
AS 1038.2-2006 | Coal and coke - Analysis and testing Coke - Total moisture (Reconfirmed 2016) |
AS/NZS 2982:2010 | Laboratory design and construction |
AS/NZS 2243.6:2010 | Safety in laboratories Plant and equipment aspects |
AS 1470-1986 | Health and safety at work - Principles and practices |
AS 5239-2011 | Examination of ignitable liquids in fire debris (Reconfirmed 2024) |
AS 1038.9.4-2006 | Coal and coke - Analysis and testing Higher rank coal - Phosphorus - Borate fusion/molybdenum blue method |
AS 5388.1-2012 | Forensic analysis Recognition, recording, recovery, transport and storage of material |
AS 3641.1-1999 | Recommended practice for atomic emission spectrometric analysis Principles and techniques |
AS 2503.2-2006 | Refractories and refractory materials - Chemical analysis Aluminosilicate refractories |
AS 1485-1983 | Safety and health in workrooms of educational establishments |
AS 1038.10.1-2003 | Coal and coke - Analysis and testing Determination of trace elements - Coal, coke and fly-ash - Determination of eleven trace elements - Flame atomic absorption spectrometric method (Reconfirmed 2013) |
SAA HB 9-1994 | Occupational personal protection |
AS 1038.6.4-2005 | Coal and coke - Analysis and testing Higher rank coal and coke - Ultimate analysis - Carbon, hydrogen and nitrogen - Instrumental method |
AS/NZS 4782.3:2014 | Double-capped fluorescent lamps - Performance specifications Procedure for quantitative analysis of mercury present in fluorescent lamps |
AS 4873.1-2005 | Recommended practice for inductively coupled plasma-mass spectrometry (ICP-MS) - Principles and techniques |
AS 2773:2019 | Ultrasonic cleaners for health service organisations |
AS 1038.4-2006 | Coal and coke - Analysis and testing Coke - Proximate analysis |
AS 2243.6-1990 | Safety in laboratories - Mechanical aspects |
AS/NZS 2243.1:2005 | Safety in laboratories Planning and operational aspects |
AS 4156.3-2008 | Coal preparation Magnetite for coal preparation plant use - Test methods (Reconfirmed 2020) |
AS 1038.18-2006 | Coal and coke - Analysis and testing Coke - Size analysis (Reconfirmed 2016) |
AS 2503.1-2006 | Refractories and refractory materials - Chemical analysis Silica refractories |
AS 1774.21-2005 | Refractories and refractory materials - Physical test methods Determination of workability index - Mouldable refractories |
AS 1038.1-2001 | Coal and coke - Analysis and testing Higher rank coal - Total moisture |
AS 1774.24-2006 | Refractories and refractory materials - Physical test methods Determination of the resistance to thermal shock |
AS 1038.22-2000 | Coal and coke - Analysis and testing Higher rank coal - Mineral matter and water of constitution (Reconfirmed 2013) (Reconfirmed 2023) |
AS 1038.26-2005 | Coal and coke - Analysis and testing Higher rank coal and coke - Guide for the determination of apparent relative density |
AS 1038.21.1.1-2008 | Coal and coke - Analysis and testing Higher rank coal and coke - Relative density - Analysis sample/density bottle method |
AS 2503.4-2006 | Refractories and refractory materials - Chemical analysis Dolomites and magnesites |
AS/NZS 4782.3(INT):2006 | Double-capped fluorescent lamps - Performance specifications Procedure for quantitative analysis of mercury present in fluorescent lamps |
AS 1774.11-2005 | Refractories and refractory materials - Physical test methods Determination of thermal expansion |
AS 2503.3-2006 | Refractories and refractory materials - Chemical analysis High alumina materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.