AS/NZS 2243.2:1997
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Safety in laboratories - Chemical aspects
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
06-30-2017
English
01-01-1997
Provides requirements, responsibilities and guidelines to promote safety in laboratories where chemicals are handled.
Committee |
CH-026
|
DocumentType |
Standard
|
ISBN |
0 7337 0906 0
|
Pages |
37
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard sets out requirements and recommended procedures for safe working practices in the chemical laboratory. It includes procedures for handling flammable, toxic, unstable and highly reactive chemicals and makes special reference to the handling of compressed and liquefied gases. The Standard also includes information on hazards associated with working in the chemical laboratory.
First published in Australia as AS 2243.2-1979.
Second edition 1982.
Third edition 1990.
Jointly revised and designated AS/NZS 2243.2:1997.
AS 1076.1-1977 | Code of practice for the selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications) Basic requirements |
AS 2243.1-1990 | Safety in laboratories General |
AS 2022-1983 | Anhydrous ammonia - Storage and handling (known as the SAA Anhydrous Ammonia Code) |
AS 2927-1987 | The storage and handling of liquefied chlorine gas |
AS 2243.10-1993 | Safety in laboratories - Storage of chemicals |
AS 1169-1982 | Minimizing of combustion hazards arising from the medical use of flammable anaesthetic agents |
AS 1894-1997 | The storage and handling of non-flammable cryogenic and refrigerated liquids (Reconfirmed 2021) |
AS 3000-1986 | Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules) |
AS 2381.1-1991 | Electrical equipment for explosive atmospheres - Selection, installation and maintenance General requirements |
AS 2243.8-1992 | Safety in laboratories Fume cupboards |
AS 1940-1993 | The storage and handling of flammable and combustible liquids |
AS 1841.5-1992 | Portable fire extinguishers Powder type |
AS/NZS 2210.1:1994 | Occupational protective footwear - Guide to selection, care and use |
AS/NZS 2210.2:1994 | Occupational protective footwear Specification |
AS/NZS 1716:1994 | Respiratory protective devices |
AS/NZS 1715:1994 | Selection, use and maintenance of respiratory protective devices |
AS 1596-1989 | LP Gas - Storage and handling |
AS 1216-1995 | Class labels for dangerous goods |
AS 4332-1995 | The storage and handling of gases in cylinders |
AS 2243.4(INT)-1994 | Safety in laboratories Ionizing radiations |
AS 2243.6-1990 | Safety in laboratories - Mechanical aspects |
AS 2430.3-1991 | Classification of hazardous areas - Specific occupancies |
AS 2982-1987 | Laboratory construction |
AS 3780-1994 | The storage and handling of corrosive substances |
AS 1336-1982 | Recommended practices for eye protection in the industrial environment |
AS 4326-1995 | The storage and handling of oxidizing agents |
AS/NZS 1337:1992 | Eye protectors for industrial applications |
AS 2836.7-1998 | Methods of testing surgical dressings and surgical dressing materials Method for the determination of level of surface-active substances |
AS/NZS 2243.3:2002 | Safety in laboratories Microbiological aspects and containment facilities |
AS 1038.2-2006 | Coal and coke - Analysis and testing Coke - Total moisture (Reconfirmed 2016) |
AS 4751(INT)-2000 | Electrogalvanized (zinc) coatings on ferrous open sections |
AS 2836.2-1998 | Methods of testing surgical dressing and surgical dressing materials Method for the identification of cotton and viscose fibres |
AS 1774.13-2000 | Refractories and refractory materials - Physical test methods Permanent dimensional change (Reconfirmed 2013) |
AS/NZS 2243.10:2004 | Safety in laboratories Storage of chemicals |
AS 4479.3-1999 | Analysis of soils Determination of metals in aqua regia extracts of soil by flam atomic absorption spectrometry (Reconfirmed 2018) |
AS 3844-1998 | Recommended practice for metal analysis by electrochemical stripping techniques |
AS/NZS 2243.1:1997 | Safety in laboratories General |
AS/NZS 2869:1998 | Tampons - Menstrual |
AS 2836.9-1998 | Methods of testing surgical dressings and surgical dressing materials Method for the determination of the presence of starch and dextrins |
AS 2331.3.9-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Metallic coatings - Porosity tests - Ferroxyl test |
AS 2331.3.10-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Cracks and pores in chromium |
AS/NZS 2243.8:2006 | Safety in laboratories - Fume cupboards |
AS 4750(INT)-2000 | Electrogalvanized (zinc) coatings on ferrous hollow sections |
AS 2503.2-2006 | Refractories and refractory materials - Chemical analysis Aluminosilicate refractories |
AS/NZS 4308:2001 | Procedures for the collection, detection and quantitation of drugs of abuse in urine |
AS 1038.6.4-2005 | Coal and coke - Analysis and testing Higher rank coal and coke - Ultimate analysis - Carbon, hydrogen and nitrogen - Instrumental method |
AS/NZS 4757:2002 | Handling and destruction of drugs |
AS/NZS 4792:1999 | Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process |
AS 4873.1-2005 | Recommended practice for inductively coupled plasma-mass spectrometry (ICP-MS) - Principles and techniques |
AS 2331.1.1-2001 | Methods of test for metallic and related coatings Local thickness tests - Micrographic examination of cross-sections |
AS 4985-2002 | Collection and stabilization of urine samples for quantitation of trace and toxic elements |
AS/NZS 4791:1999 | Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process |
AS/NZS 3816:1998 | Management of clinical and related wastes |
AS 2331.2.1-2001 | Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Dissolution methods - Strip and weigh, and analytical |
AS 1038.4-2006 | Coal and coke - Analysis and testing Coke - Proximate analysis |
AS/NZS 2243.1:2005 | Safety in laboratories Planning and operational aspects |
AS 1774.22-2000 | Refractories and refractory materials - Physical test methods Refractory mortar - Test methods |
AS 2331.3.3-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Copper accelerated acetic acid salt spray test (CASS test) |
AS 2331.1.2-2001 | Methods of test for metallic and related coatings Local thickness tests - Coulometric method (Reconfirmed 2017) |
AS 2331.3.2-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Acetic acid salt spray test (ASS test) |
AS 2331.3.6-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Electrographic porosity test |
AS 4332-2004 | The storage and handling of gases in cylinders (Reconfirmed 2016) |
AS 2331.3.4-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Thioacetamide anti-tarnish and porosity test |
AS 1038.18-2006 | Coal and coke - Analysis and testing Coke - Size analysis (Reconfirmed 2016) |
AS 2331.4.1-2001 | Methods of test for metallic and related coatings Physical tests - Qualitative adhesion tests (Reconfirmed 2017) |
AS 2503.1-2006 | Refractories and refractory materials - Chemical analysis Silica refractories |
AS 1774.21-2005 | Refractories and refractory materials - Physical test methods Determination of workability index - Mouldable refractories |
AS 3515.1-2005 | Gold and gold bearing alloys - Determination of gold content (less than 30%) - Gravimetric (fire assay) method |
AS/NZS 2243.8:2001 | Safety in laboratories - Fume cupboards |
AS 4750-2003 | Electrogalvanized (zinc) coatings on ferrous hollow and open sections (Reconfirmed 2017) |
AS 2331.3.5-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Sulfur dioxide/hydrogen sulfide porosity tests |
AS 1038.26-2005 | Coal and coke - Analysis and testing Higher rank coal and coke - Guide for the determination of apparent relative density |
AS 2331.2.3-2001 | Methods of test for metallic and related coatings Tests for average coating mass per unit area or for thickness - Hydrogen evolution method for zinc coatings |
AS 4479.2-1997 | Analysis of soils Extraction of heavy metals and metalloids from soil by aqua regia - Hotplate digestion method |
AS/NZS 1301.012S:2003 | Methods of test for pulp and paper Organic solvent extractives in wood, pulp and paper (Reconfirmed 2013) |
AS/NZS 4680:1999 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles |
AS 2331.3.1-2001 | Methods of test for metallic and related coatings Corrosion and related property tests - Neutral salt spray test (NSS test) (Reconfirmed 2017) |
AS 2503.4-2006 | Refractories and refractory materials - Chemical analysis Dolomites and magnesites |
AS/NZS 4782.3(INT):2006 | Double-capped fluorescent lamps - Performance specifications Procedure for quantitative analysis of mercury present in fluorescent lamps |
AS 1774.11-2005 | Refractories and refractory materials - Physical test methods Determination of thermal expansion |
AS 2836.11-1998 | Methods of testing surgical dressings and surgical dressing materials Method for the determination of sulfated ash content |
AS 2503.3-2006 | Refractories and refractory materials - Chemical analysis High alumina materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.