AS/NZS 1860.1:2002
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Particleboard flooring Specifications
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
05-29-2024
08-20-2002
Specifies product requirements for the purpose of quality control in manufacture and the performance requirements in application of particleboard flooring intended to be installed in accordance with AS1860. These requirements were originally covered in AS/NZS1859.1:1997.
Committee |
TM-005
|
DocumentType |
Standard
|
ISBN |
0 7337 4759 0
|
Pages |
8
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard specifies the product requirements and characteristic design data for particleboard flooring, as classified in Clause 5.
Originated as part of AS O115-1968.
Previous edition AS/NZS 1859.1:1997.
Jointly revised and redesignated in part as AS/NZS 1860.1:2002.
Reissued incorporating Amendment No. 1 (May 2004).
Reissued incorporating Amendment No. 2 (February 2006).
AS/NZS 4266.6(INT):2001 | Reconstituted wood-based panels - Methods of test Tensile strength perpendicular to the plane of the panel (Internal bond strength) |
AS/NZS 4266.12:1995 | Reconstituted wood-based panels - Methods of test Determination of surface water absorption |
AS/NZS 4266.14(INT):2001 | Reconstituted wood-based panels - Methods of test Dimensional changes associated with changes in relative humidity |
AS/NZS 4266.3(INT):2001 | Reconstituted wood-based panels - Methods of test Moisture content |
AS/NZS 4266.13(INT):2001 | Reconstituted wood-based panels - Methods of test Resistance to axial withdrawal of screws |
AS/NZS 4266.9:1995 | Reconstituted wood-based panels - Methods of test Determination of thickness stability and glue bond quality |
AS 1860-1998 | Installation of particleboard flooring |
AS/NZS 4266.10(INT):2001 | Reconstituted wood-based panels - Methods of test Wet bending strength after immersion in water at 70 degrees Celsius or boiling temperature |
AS/NZS 4266.2(INT):2001 | Reconstituted wood-based panels - Methods of test Dimensions, squareness, flatness and edge straightness |
AS/NZS 1530.3:1999 | Methods for fire tests on building materials, components and structures Simultaneous determination of ignitability, flame propagation, heat release and smoke release (Reconfirmed 2016) |
AS/NZS 4266.7(INT):2001 | Reconstituted wood-based panels - Methods of test Surface soundness |
AS/NZS 1604.2:2002 | Specification for preservative treatment - Reconstituted wood-based products |
AS/NZS 4266.4(INT):2001 | Reconstituted wood-based panels - Methods of test Density |
AS/NZS 4266.5(INT):2001 | Reconstituted wood-based panels - Methods of test Modulus of elasticity in bending and bending strength |
AS/NZS 4266.8(INT):2001 | Reconstituted wood-based panels - Methods of test Swelling in thickness after immersion in water |
AS/NZS 4266.18:1995 | Reconstituted wood-based panels - Methods of test Determination of efficacy of fungicide treatment |
AS/NZS 4266.16(INT):2001 |
AS 1684.3-2010 | Residential timber-framed construction Cyclonic areas |
AS/NZS 1604.2:2010 | Specification for preservative treatment - Reconstituted wood-based products |
AS 1684.4-2010 | Residential timber-framed construction Simplified - Non-Cyclonic Areas |
AS 1684.2-2010 | Residential timber-framed construction Non-cyclonic areas |
AS 3958.1-2007 | Ceramic tiles Guide to the installation of ceramic tiles |
AS 1684.2-2006 | Residential timber-framed construction Non-cyclonic areas (SEE IMPORTANT NOTE) |
AS 4654.2-2009 | Waterproofing membrane systems for exterior use - Above ground level Design and installation |
AS 3740-2010 | Waterproofing of domestic wet areas |
AS 3740-2004 | Waterproofing of wet areas within residential buildings |
AS/NZS 1604.2:2012 | Specification for preservative treatment Reconstituted wood-based products |
AS 1860.2-2006 | Particleboard flooring Installation (Reconfirmed 2016) |
AS 1684.3-2006 | Residential timber-framed construction Cyclonic areas |
AS 1684.4-2006 | Residential timber-framed construction - Simplified Non-cyclonic areas (SEE IMPORTANT NOTE) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.