• There are no items in your cart

AS/NZS 1677.2:1998

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Refrigerating systems Safety requirements for fixed applications

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

08-23-2024

Published date

01-05-1998

Preview
US$86.69
Excluding Tax where applicable

Specifies requirements for the safety aspects, in terms of the design, construction, installation and inspection of refrigerating appliances, systems and ancillary equipment intended for use or installation in institutional, public assembly, residential, commercial and industrial occupancies. It applies to new refrigerating systems, to extensions and modifications of existing systems and to used systems on being reinstalled and operated at another site. It also applies in the case of the conversion of a system for use with another refrigerant.

Committee
ME-006
DocumentType
Standard
ISBN
0 7337 1685 7
Pages
56
PublisherName
Standards Australia
Status
Superseded
SupersededBy
Supersedes
UnderRevision

This Standard specifies requirements for the safety aspects, in terms of the design, construction, installation and inspection, of refrigerating appliances, systems and ancillary equipment intended for use or installation in institutional, public assembly, residential, commercial and industrial occupancies. It includes heat pumps and reverse cycle airconditioning systems. It applies to new refrigerating systems, to extensions and modifications of existing systems and to used systems on being reinstalled and operated at another site. It also applies in the case of the conversion of a system for use with another refrigerant.It does not apply to specific requirements detailed in the following:(a) Household refrigerators covered by AS/NZS 4474.1.(b) Refrigerated room airconditioners covered by AS 1861.(c) Electrical approval and test specifications such as AS/NZS 3179, AS 3303, AS 3305 or NZS 6324.NOTES:1 This Standard is limited to fundamental safety requirements and does not purport to provide detailed design guidance.2 The requirements of this Standard are based on the assumption that refrigerating systems are designed, constructed, installed, inspected and maintained by competent personnel.3 The introduction of new refrigerants and techniques make it critical to ensure that the equipment to be installed or converted is suitable for use with the refrigerant to be used. Failure to observe appropriate precautions could lead to system failure resulting in injury or death.

First published in Australia as part of AS CB3-1933.
AS CB3-1933 redated 1939.
Second edition 1967.
Revised and redesignated AS 1677-1974.
Second edition 1981.
Third edition 1986.
First published in New Zealand as NZSS 1653:1962.
Revised and redesignated NZS 5235:1978.
NZS 5235.2 first published 1988.
NZS 5235:1978 revised and redesignated NZS 5235.1:1991.
AS 1677, NZS 5235.1:1991 and NZS 5235.2:1988 jointly revised, amalgamated and redesignated in part as AS/NZS 1677.2:1998.

AS 2106-1980 Methods for the determination of the flashpoint of flammable liquids (closed cup)
AS/NZS 1596:1997 Storage and handling of LP Gas
AS 1319-1994 Safety signs for the occupational environment (Reconfirmed 2018)
AS 4041-1998 Pressure piping
AS 2971-1987 Serially produced pressure vessels
AS 1271-1997 Safety valves, other valves, liquid level gauges, and other fittings for boilers and unfired pressure vessels
AS 1674.1-1997 Safety in welding and allied processes Fire precautions (Reconfirmed 2016)
AS 1210-1989
AS 1668.2-1991 The use of mechanical ventilation and air-conditioning in buildings Mechanical ventilation for acceptable indoor-air quality
AS 1530.4-1990 Methods for fire tests on building materials, components and structures Fire-resistance tests of elements of building construction
AS/NZS 4331.2:1995 Metallic flanges Cast iron flanges (Reconfirmed 2020)
AS 1170.4-1993 Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads
AS/NZS 1571:1995 Copper - Seamless tubes for airconditioning and refrigeration
AS 1861.1-1988 Air-conditioning units - Methods of assessing and rating performance Refrigerated room air-conditioners
AS 1167.1-1993 Welding and brazing - Filler metals Filler metal for brazing and braze welding
AS/NZS 1200:1994 Pressure equipment
AS 2381.1-1991 Electrical equipment for explosive atmospheres - Selection, installation and maintenance General requirements
AS/NZS 4474.1:1997 Performance of household electrical appliances - Refrigerating appliances Energy consumption and performance
AS 1345-1995 Identification of the contents of pipes, conduits and ducts (Reconfirmed 2018)
AS 2430.1-1987 Classification of hazardous areas - Explosive gas atmospheres
AS/NZS 1716:1994 Respiratory protective devices
AS/NZS 1715:1994 Selection, use and maintenance of respiratory protective devices
AS/NZS 1677.1:1998 Refrigerating systems Refrigerant classification
AS 1939-1990 Degrees of protection provided by enclosures for electrical equipment (IP Code)
AS 4332-1995 The storage and handling of gases in cylinders
AS/NZS 3179:1993 Approval and test specification - Refrigerated room air-conditioners
AS 2129-1994 Flanges for pipes, valves and fittings
AS/NZS 3788:1996 Pressure equipment - In-service inspection
AS 2812-1985 Welding, brazing and cutting of metals - Glossary of terms
AS 1358-1989 Bursting discs and bursting disc devices - Guide to application, selection, and installation
AS/NZS 4331.1:1995 Metallic flanges Steel flanges (Reconfirmed 2020)
AS 4024.1-1996 Safeguarding of machinery General principles
AS 3303-1995 Approval and test specification - Particular requirements for refrigerators and food freezers
AS 3873-1995 Pressure equipment - Operation and maintenance
AS 1861.2-1991 Air-conditioning units - Methods of assessing and rating performance Refrigerated package air-conditioners
AS 2022-1983 Anhydrous ammonia - Storage and handling (known as the SAA Anhydrous Ammonia Code)
AS 2473-1990 Valves for compressed gas cylinders (threaded outlet)
AS/NZS 4331.3:1995 Metallic flanges Copper alloy and composite flanges (Reconfirmed 2020)
AS 3305-1988 Approval and test specification - Particular requirements for motor compressors

AS 1731.2-2003 Refrigerated display cabinets General mechanical and physical requirements (Reconfirmed 2013)
AS/NZS 1596:2002 The storage and handling of LP Gas
AS/NZS 2430.3.9:2004 Classification of hazardous areas Examples of area classification - Miscellaneous
AS 1731.2-2000 Refrigerated display cabinets General mechanical and physical requirements
AS/NZS 60079.10.1:2009 Explosive atmospheres Classification of areas - Explosive gas atmospheres (IEC 60079-10-1, Ed.1.0(2008) MOD)
AS/NZS 5377:2013 Collection, storage, transport and treatment of end-of-life electrical and electronic equipment
AS 4041-2006 Pressure piping (Reconfirmed 2016)
AS/NZS 2022:2003 Anhydrous ammonia - Storage and handling (Reconfirmed 2023)
AS/NZS 2712:2007 Solar and heat pump water heaters - Design and construction (Reconfirmed 2020)
AS/NZS 3788:2006 Pressure equipment - In-service inspection (Reconfirmed 2017)
AS/NZS 1596:2008 The storage and handling of LP Gas
AS/NZS 1677.1:1998 Refrigerating systems Refrigerant classification
AS/NZS 2712:2002 Solar and heat pump water heaters - Design and construction
AS 3864.1-2012 Medical refrigeration equipment - For the storage of blood and blood products Manufacturing requirements
AS 2971-2002 Serially produced pressure vessels
AS/NZS 1596:2014 The storage and handling of LP Gas
AS 2971-2007 Serially produced pressure vessels (Reconfirmed 2017)
AS 1668.2-2012 The use of ventilation and airconditioning in buildings Mechanical ventilation in buildings

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.