AS/NZS 1580.107.2:1995
Current
The latest, up-to-date edition.
Paints and related materials - Methods of test Determination of wet film thickness from wet film mass (Reconfirmed 2013)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
07-05-1995
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies a procedure for the determination of the wet film thickness of a paint coating from its wet film mass.
| Committee |
CH/3
|
| DocumentType |
Standard
|
| ISBN |
0 7262 9766 6
|
| Pages |
3
|
| ProductNote |
Reconfirmed 18/09/2013This standard has been reconfirmed in Australia in 2013 and remains current in New Zealand. Reconfirmation Notice 18/09/2013
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard sets out a procedure for the determination of the wet film thickness of a coating from its wet film mass. This method is intended essentially for use in the application of films of specified thickness to test panels. It is only suitable for use with brushing materials known not to contain an appreciable amount of solvent of high volatility.NOTE:Because of practical difficulties in weighing to the required degree of accuracy, the method should, in general, only be used when the area of the wet film, i.e. the face area of the test panel, is not less than 0.02 m2.
Originated in Australia as AS K41.107.2-1957.
Previous edition AS 1580.107.2-1980.
Jointly revised and designated AS/NZS 1580.107.2:1995.
| AS 1580.102.1-1992 | Paints and related materials - Methods of test Sampling procedure |
| AS/NZS 1580.202.2:1995 | Paints and related materials - Methods of test Density of water-dispersed paints subject to foaming (Reconfirmed 2013) |
| AS 1580.101.5-1986 | Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled |
| AS 1580.104.1-1992 | Paints and related materials - Methods of test Recommended materials for test panels |
| AS 1580.103.1-1980 | Paints and related materials - Methods of test Preliminary examination and preparation for testing |
| AS/NZS 1580.104.1:2000 | Paints and related materials - Methods of test Recommended materials for test panels (Reconfirmed 2013) |
| AS 1580.202.2-1980 | Paints and related materials - Methods of test Density of water-dispersed paints subject to foaming |
| AS 1580.102.1-2002 | Paints and related materials - Methods of test Sampling procedure |
| AS/NZS 1580.202.1:1995 | Paints and related materials - Methods of test Density (Reconfirmed 2013) |
| AS/NZS 1580.101.5:1999 | Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013) |
| AS 1580.202.1-1980 | Paints and related materials - Methods of test Density |
| AS/NZS 1580.103.1:1995 | Paints and related materials Methods of test - Examination and preparation of samples for testing (Reconfirmed 2013) |
| AS 2331.1.1-2001 | Methods of test for metallic and related coatings Local thickness tests - Micrographic examination of cross-sections |
| AS 1580.107.1-2004 | Paints and related materials - Methods of test Determination of wet film thickness from dry film mass |
| AS 4049.3-2005 | Paints and related materials - Pavement marking materials Waterborne paint - For use with surface applied glass beads (Reconfirmed 2016) |
| AS/NZS 3750.21:2008 | Paints for steel structures Undercoat - Solvent-borne (Reconfirmed 2021) |
| AS 4049.1-2005 | Paints and related materials - Pavement marking materials Solvent-borne paint - For use with surface applied glass beads (Reconfirmed 2016) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.