AS/NZS 1559:1997
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Hot-dip galvanized steel bolts and associated nuts and washers for tower construction
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
06-05-1997
Specifies dimensional material and marking requirements for single nut and double nut hot-dip galvanized steel bolts with associated nuts and washers for tower construction with ISO metric coarse pitch series threads in diameters from 12mm to 30mm inclusive and lengths up to 160mm for single nut bolts, 125mm for double nut bolts and from 180mm to 270mm for step bolts. Clamping lengths are tabulated in an appendix and equations for the determination of the clamping lengths are given.
Committee |
ME-029
|
DocumentType |
Standard
|
ISBN |
0 7337 1133 2
|
Pages |
24
|
PublisherName |
Standards Australia
|
Status |
AvailableSuperseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard specifies the requirements for hot-dip galvanized bolts and step bolts with ISO metric coarse pitch series threads for normal and low temperature applications in tower construction, and associated nuts and washers. Bolt sizes are as follows:(a) Single-nut type bolts in diameters from 12 to 30 mm inclusive with lengths from 35 to 160 mm inclusive.(b) Double-nut type bolts in diameters from 12 to 30 mm inclusive with lengths from 50 to 125 mm inclusive.(c) Step bolts 16, 22 and 24 mm in diameter with lengths from 180 to 270 mm inclusive.NOTE: The single-nut and double-nut bolts are known as 'tower bolts' and have a thread length/bolt length relationship to enable threads to be excluded from shear planes when assembled.
Originated in Australia as AS 1559-1986.
Jointly revised and designated AS/NZS 1559:1997.
AS 1544.2-1989 | Methods for impact tests on metals Charpy V-notch |
AS/NZS 1112:1996 | ISO metric hexagon nuts, including thin nuts, slotted nuts and castle nuts |
AS 1544.2-2003 | Method for impact tests on metals Charpy V-notch (Reconfirmed 2017) |
AS 1214-1983 | Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) |
AS/NZS 4291.2:1995 | Mechanical properties of fasteners Nuts with specified proof load values - Coarse thread |
AS/NZS 3678:1996 | Structural steel - Hot-rolled plates, floorplates and slabs |
AS/NZS 1110:1995 | ISO metric precision hexagon bolts and screws |
AS/NZS 4291.1:1995 | Mechanical properties of fasteners Bolts, screws and studs |
AS 1275-1985 | |
AS 1654.2-1995 | ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts |
HB 18.22:2003 | Guidelines for third-party certification and accreditation General criteria for supplier’s declaration of conformity |
AS 1650-1989 | Hot-dipped galvanized coatings on ferrous articles |
AS 4291.1-2000 | Mechanical properties of fasteners made of carbon steel and alloy steel - Bolts, screws and studs |
AS 3995-1994 | Design of steel lattice towers and masts |
AS/NZS 7000:2016 | Overhead line design |
AS/NZS 4600:2005 | Cold-formed steel structures |
AS 1154.1-2009 | Insulator and conductor fittings for overhead power lines Performance, material, general requirements and dimensions (Reconfirmed 2019) |
AS 5100.6-2004 | Bridge design Steel and composite construction |
AS 4100-1998 | Steel structures (Reconfirmed 2016) |
HB 331-2012 | Overhead line design |
AS 1154.1-2004 | Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions |
AS/NZS 7000:2010 | Overhead line design - Detailed procedures |
AS/NZS 5131:2016 | Structural steelwork - Fabrication and erection |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.