AS 60947.2-2005
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Low-voltage switchgear and controlgear - Circuit-breakers
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
06-30-2017
English
01-01-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies requirements for circuit-breakers, the main contacts of which are intended to be connected to circuits, the rated voltage of which does not exceed 1000 V a.c. or 1500 V d.c. Includes requirements for coordination under short-circuit conditions between a circuit-breaker and another short-circuit protective device. Is identical with and has been reproduced from IEC 60947.2 Edition 3-0 (2003-04).
| Committee |
EL-006
|
| DocumentType |
Standard
|
| ISBN |
0 7337 6583 1
|
| Pages |
196
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| IEC 60947-2:2003 | Identical |
Originated as AS 3858-1990.
Revised and redesignated AS 3947.2-1997.
Jointly revised and designated AS/NZS 3947.2:2002.
Revised and redesignated as AS 60947.2-2005.
| AS 60068.2.30-2003 | Environmental testing Tests - Test Db and guidance: Damp heat, cyclic (12 + 12-hour cycle) |
| AS/NZS 60898.2:2004 | Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. and d.c. operation (IEC 60898-2, Ed. 1.1 (2003) MOD) (Reconfirmed 2016) |
| AS/NZS CISPR 22:2004 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| AS 3111-1994 | Approval and test specification - Miniature overcurrent circuit-breakers |
| AS/NZS CISPR 11:2004 | Industrial scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement |
| AS 60947.1-2004 | Low-voltage switchgear and controlgear General rules |
| AS/NZS 61000.4.6:1999 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| AS/NZS 60898.1:2004 | Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations Circuit-breakers for a.c. operation (IEC 60898-1, Ed. 1.2 (2003) MOD) |
| AS 60947.4.1-2004 | Low-voltage switchgear and controlgear Contactors and motor-starters - Electromechanical contactors and motor-starters |
| AS/NZS 3000:2000 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 61000.4.2:2002 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Electrostatic discharge immunity test |
| AS/NZS 60695.2.12:2001 | Fire hazard testing Glowing/hot wire based test methods - Glow-wire flammability test method for materials |
| AS/NZS 60695.2.11:2001 | Fire hazard testing Glowing/hot wire based test methods - Glow-wire flammability test method for end-products (IEC 60695-2-11:2000, MOD) |
| AS/NZS 60695.2.10:2001 | Glowing/hot wire based test methods Glow-wire apparatus and common test procedure |
| AS/NZS 61000.3.3:2003 | Electromagnetic compatibility (EMC) Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current less than or equal to 16A per phase and not subject to conditional connection |
| AS/NZS 61000.4.3:1999 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Radiated radio-frequency electromagnetic field immunity test |
| AS 2184-1985 | Low voltage switchgear and controlgear - Moulded-case circuit-breakers for rated voltages up to and including 600 V a.c. and 250 V d.c. |
| AS 1852.441-1985 | International electrotechnical vocabulary - Switchgear, controlgear and fuses |
| AS/NZS 60695.2.13:2001 | Fire hazard testing Glowing/hot wire based test methods - Glow-wire ignitability test method for materials (IEC 60695-2-13:2000, IDT) |
| AS/NZS 61000.4.5:1999 | Electromagnetic compatibility (EMC) Testing and measurement techniques - Surge immunity test |
| AS/NZS 61000.3.2:2003 | Electromagnetic compatibility (EMC) Limits - Limits for harmonic current emissions (equipment input current less than or equal to 16 A per phase) |
| AS 60068.2.14-2003 | Environmental testing Tests - Test N: Change of temperature |
| AS/NZS 3012:2010 | Electrical installations - Construction and demolition sites |
| AS/NZS 3111:2009 | Approval and test specification - Miniature overcurrent circuit-breakers (Reconfirmed 2020) |
| AS/NZS 4024.1:2006 Series | Safety of machinery Safety of machinery series |
| AS 2941-2008 | Fixed fire protection installations - Pumpset systems |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS 2941-2013 | Fixed fire protection installations - Pumpset systems |
| AS/NZS 4240.1:2009 | Remote control systems for mining equipment Design, construction, testing, installation and commissioning (Reconfirmed 2021) |
| AS 2467-2008 | Maintenance of electrical switchgear |
| AS 4024.1502-2006 | Safety of machinery Design of safety related parts of control systems - Validation (Reconfirmed 2014) |
| AS 62271.1-2012 | High-voltage switchgear and controlgear Common specifications |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.