AS 5100.5:2017
Current
The latest, up-to-date edition.
Bridge design Concrete
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
03-31-2017
Sets out minimum requirements for the design and construction of concrete bridges and associated structures, including members that contain reinforcing steel and tendons, or both, in limit state format.
Committee |
BD-090
|
DocumentType |
Standard
|
ISBN |
978 1 76035 718 4
|
Pages |
215
|
ProductNote |
Also numbered as AP-G51.5-17.
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard sets out minimum requirements for the design and construction of concrete bridges and associated structures that contain reinforcement or tendons, or both. It also sets out minimum requirements for plain and steel fibre reinforced concrete (SFRC) members. NOTES: 1 It is intended that the properties and requirements for reinforcement or tendons, as set out in this Standard, may also be used for the design and construction of elements not containing concrete, for example, stress laminated timber decks.2 For design life of bridges covered by this Standard, see Clause 4.1.
Originated as HB 77.5-1996.
Revised and redesignated as AS 5100.5-2004.
Second edition 2017.
Reissued incorporating Amendment No 1 (November 2018).
Reissued incorporating Amendment No 2 (May 2024).
AS 1012.21-1999 | Methods of testing concrete Determination of water absorption and apparent volume of permeable voids in hardened concrete (Reconfirmed 2014) |
AS 1012.11-2000 | Methods of testing concrete Determination of the modulus of rupture (Reconfirmed 2014) |
AS 1012.20.1:2016 | Methods of testing concrete Determination of chloride and sulfate in hardened concrete and aggregates - Nitric acid extraction method |
AS 3799-1998 | Liquid membrane-forming curing compounds for concrete (Reconfirmed 2018) |
AS 3735-2001 | Concrete structures for retaining liquids |
SA HB 79:2015 | Alkali Aggregate Reaction - Guidelines on Minimising the Risk of Damage to Concrete Structures in Australia |
AS 5100.2:2017 | Bridge design Design loads |
AS/NZS 4672.2:2007 | Steel prestressing materials Testing requirements |
AS 1012.20.2:2016 | Methods of testing concrete Determination of water-soluble chloride in aggregates and hardened concrete |
AS 1012.1:2014 | Methods of testing concrete Sampling of concrete |
AS 1012.3.1:2014 | Methods of testing concrete Determination of properties related to the consistency of concrete - Slump test |
AS 3600-2009 | Concrete structures |
AS 1012.9:2014 | Methods of testing concrete Compressive strength tests - Concrete, mortar and grout specimens |
AS 1012.13:2015 | Methods of testing concrete Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory |
AS 1012.4.1:2014 | Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in concrete volume with increased air pressure |
AS 1100.501-1985 | Technical drawing - Structural engineering drawing |
AS 1379-2007 | Specification and supply of concrete (Reconfirmed 2017) |
AS 1012.12.1-1998 | Methods of testing concrete Determination of mass per unit volume of hardened concrete - Rapid measuring method (Reconfirmed 2014) |
AS 5100.1:2017 | Bridge design Scope and general principles |
AS/NZS 1768:2007 | Lightning protection |
AS 1597.2-2013 | Precast reinforced concrete box culverts Large culverts (exceeding 1200 mm span or 1200 mm height and up to and including 4200 mm span and 4200 mm height) |
AS/NZS 1554.6:2012 | Structural steel welding Welding stainless steels for structural purposes |
AS 3735 SUPP 1-2001 | Concrete structures for retaining liquids - Commentary (Supplement to |
AS/NZS 4671:2001 | Steel reinforcing materials |
AS 4672.1:2007 | Steel prestressing materials General requirements |
AS 1012.10-2000 | Methods of testing concrete Determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting test) (Reconfirmed 2014) |
AS 5100.7:2017 | Bridge design Bridge assessment |
AS/NZS 3500.2:2015 | Plumbing and drainage Sanitary plumbing and drainage |
AS/NZS 1554.3:2014 | Structural steel welding Welding of reinforcing steel |
AS/NZS 1170.0:2002 | Structural design actions General principles |
AS 1012.4.3:2014 | Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring air volume when concrete is dispersed in water |
AS 1012.2:2014 | Methods of testing concrete Preparing concrete mixes in the laboratory |
AS 1012.3.5:2015 | Methods of testing concrete Determination of properties related to the consistency of concrete - Slump flow, T500 and J-ring test |
AS/NZS 3582.1:2016 | Supplementary cementitious materials Fly ash |
AS 1012.16-1996 | Methods of testing concrete Determination of creep of concrete cylinders in compression (Reconfirmed 2014) |
AS/NZS 2425:2015 | Bar chairs in reinforced concrete - Product requirements and test methods |
AS/NZS 3500.4:2015 | Plumbing and drainage Heated water services |
AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 3582.3:2002 | Supplementary cementitious materials for use with portland and blended cement Amorphous silica |
AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
AS 1012.14-1991 | Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength |
AS 1012.4.2:2014 | Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in air pressure in chamber above concrete |
AS 3972-2010 | General purpose and blended cements |
AS/NZS 3582.3:2016 | Supplementary cementitious materials Amorphous silica |
AS 1478.1-2000 | Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018) |
AS 1012.12.2-1998 | Methods of testing concrete Determination of mass per unit volume of hardened concrete - Water displacement method (Reconfirmed 2014) |
AS/NZS 3500.1:2015 | Plumbing and drainage Water services |
AS 3610.1-2010 | Formwork for concrete Documentation and surface finish |
AS 1141.60.2:2014 | Methods for sampling and testing aggregates Potential alkali-silica reactivity - Concrete prism method |
AS 1012.17-1997 | Methods of testing concrete Determination of the static chord modulus of elasticity and Poisson’s ratio of concrete specimens (Reconfirmed 2014) |
AS 5100.9:2017 | Bridge design Timber |
AS 5100.7:2017 | Bridge design Bridge assessment |
AS 3700:2018 | Masonry Structures |
AS 5100.4:2017 | Bridge design Bearings and deck joints |
AS 5100.8:2017 | Bridge design Rehabilitation and strengthening of existing bridges |
AS 5100.1:2017 | Bridge design Scope and general principles |
AS 1012.14:2018 | Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength and mass per unit volume |
AS 5100.3:2017 | Bridge design Foundation and soil-supporting structures |
AS 5100.2:2017 | Bridge design Design loads |
AS/NZS 5100.6:2017 | Bridge design Steel and composite construction |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.