AS 4793:2020
Current
The latest, up-to-date edition.
Mechanical tapping bands for waterworks purposes
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
01-17-2020
Important note : All end users must be registered with an Account prior to user licenses being assigned.This Standard specifies requirements for design, materials, and performance in service of PN 16 mechanical tapping bands used for the connection of property service pipes to reticulation water mains.
| Committee |
WS-016
|
| DocumentType |
Standard
|
| ISBN |
978 1 76072 700 0
|
| Pages |
26
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for design, materials, and performance in service of PN 16 mechanical tapping bands used for the connection of property service pipes to reticulation water mains.
This Standard applies to tapping bands, with and without electrical insulation, for mechanical connection to metallic and plastics standard water mains, including polyethylene. The nominal operating temperature range is 0 °C to 40 °C. Tapping bands for use with polyethylene pipes, including other PN ratings and gas applications, are included in AS/NZS 4129.
Solvent cemented PVC tapping bands are outside the scope of this Standard.
The nominal size range of tapping bands covered by this Standard is DN 50 to DN 450 with outlet sizes ranging from dn 15 to dn 50, as appropriate to the tapping band size.
A minimum sampling and testing frequency plan to demonstrate conformity with this Standard is specified in Appendix A.
Originated as AS/NZS 4793:2009.
Revised and redesignated as AS 4793:2020.
| ASTM A 240/A240M : 2019 | Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications |
| AS/NZS 1567:1997 | Copper and copper alloys - Wrought rods, bars and sections (Reconfirmed 2021) |
| AS 1237.1-2002 | Plain washers for metric bolts, screws and nuts for general purposes General plan (Reconfirmed 2015) |
| ASTM A 276/A276M : 2017 | Standard Specification for Stainless Steel Bars and Shapes |
| AS/NZS 1568:1998 | Copper and copper alloys - Forging stock and forgings |
| AS/NZS 4020:2018 | Testing of products for use in contact with drinking water |
| AS 2205.10.1-2003 | Methods for destructive testing of welds in metal Corrosion test for welded austenitic stainless steel |
| AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
| AS/NZS 1462.8:2008 | Methods of test for plastics pipes and fittings Method of testing the leaktightness of assemblies (Reconfirmed 2017) |
| AS/NZS 1554.6:2012 | Structural steel welding Welding stainless steels for structural purposes |
| ASTM A 380/A380M : 2017 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| ISO 9080:2012 | Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
| AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
| AS/NZS 4129:2008 | Fittings for polyethylene (PE) pipes for pressure applications |
| ASTM A 473 : 2019 | Standard Specification for Stainless Steel Forgings |
| AS ISO 7.1-2008 | Pipe threads where pressure-tight joints are made on the threads Dimensions, tolerances and designation |
| AS/NZS 4765:2017 | Modified PVC (PVC-M) pipes for pressure applications |
| AS/NZS 4441:2017 | Oriented PVC (PVC-O) pipes for pressure applications (ISO 16422:2014, MOD) |
| AS 4796:2016 | Water supply - Metal-bodied and plastic-bodied ball valves for property service connection |
| ISO 4144:2003 | Pipework Stainless steel fittings threaded in accordance with ISO 7-1 |
| ASTM A 312/A312M : 2018 | Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes |
| AS/NZS 4158:2003 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes (Reconfirmed 2015) |
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| AS/NZS 1477:2017 | PVC pipes and fittings for pressure applications |
| AS 2345-2006 | Dezincification resistance of copper alloys |
| AS 1831-2007 | Ductile cast iron (Reconfirmed 2017) |
| AS/NZS 1462.6:2008 | Methods of test for plastics pipes and fittings Thermoplastics pipes, fittings and assemblies for the transport of fluids under pressure - Resistance to internal pressure (Reconfirmed 2017) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.