Preview

Steel structures (Reconfirmed 2016)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Superseded date

05-17-2024

Superseded by

AS 4100:2020

Published date

06-05-1998

Publisher

Standards Australia

Preview

US$110.67

Excluding Tax where applicable

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Committee	BD-001
DocumentType	Standard
ISBN	0 7337 1981 3
Pages	209
ProductNote	Reconfirmed 03/06/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 03/06/2016
PublisherName	Standards Australia
Status	Superseded
SupersededBy	AS 4100:2020
Supersedes	AS 4100-1990
UnderRevision	DR AS 4100 AMD 1

This Standard sets out minimum requirements for the design, fabrication, erection, and modification of steelwork in structures in accordance with the limit states design method. This Standard applies to buildings, structures and cranes constructed of steel.This Standard is intended to apply also to roadway, railway, and pedestrian bridges. However, the requirements given in this Standard may not always be sufficient for bridge applications. In these circumstances, the specifications of the relevant Authority shall be used.This Standard does not apply to the following structures and materials:(a) Steel elements less than 3 mm thick, with the exception of sections complying with AS 1163 and packers.(b) Steel members for which the value of the yield stress used in design (fy) exceeds 450 MPa.(c) Cold-formed members, other than those complying with AS 1163, which shall be designed in accordance with AS/NZS 4600.(d) Composite steel-concrete members, which shall be designed in accordance with AS 2327.NOTE: The general principles of design, fabrication, erection, and modification embodied in this Standard may be applied to steel-framed structures or members not specifically mentioned herein.

Originated in part as SAA INT 351-1956.
Previous edition AS 4100-1990.
Second edition 1998.
Reissued incorporating Amendment No. 1 (February 2012).

AS 1391-2007	Metallic materials - Tensile testing at ambient temperature (Reconfirmed 2017)
AS 2205.2.1-1997	Methods for destructive testing of welds in metal Transverse butt tensile test
AS 2074-2003	Cast steels
AS 1858.1-1986	Electrodes and fluxes for submerged-arc welding Carbon steels and carbon-manganese steels
AS 3600-2001	Concrete structures
AS 2670.2-1990	Evaluation of human exposure to whole-body vibration - Continuous and shock-induced vibration in buildings (1 to 80 Hz)
AS 1170.2-1989	Minimum design loads on structures (known as the SAA Loading Code) Wind loads
AS 2203-1981	Carbon steel electrodes, cored (for arc welding)
AS 2205.2.1-2003	Methods for destructive testing of welds in metal Transverse butt tensile test
AS 1418.3-1997	Cranes, hoists and winches Bridge, gantry, portal (including container cranes) and jib cranes (Reconfirmed 2016)
AS/NZS 1112:1996	ISO metric hexagon nuts, including thin nuts, slotted nuts and castle nuts
AS 1418.5-2002	Cranes, hoists and winches Mobile cranes
AS 2670-1983	Vibration and shock - Guide to the evaluation of human exposure to whole body vibration
AS/NZS 1873.4:2003	Powder-actuated (PA) hand-held fastening tools - Fasteners
AS 1581-1973	Dental mercury
AS 1735.1-2003	Lifts, escalators and moving walks General requirements
AS/NZS 1873.2:2003	Powder-actuated (PA) hand-held fastening tools - Design and construction
AS/NZS 1873.4:1994	Powder-actuated (PA) hand-held fastening tools - Fasteners
AS/NZS 1554.5:1995	Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 1170.3-1990	Minimum design loads on structures (known as the SAA Loading Code) - Snow loads
AS 1418.5-1995	Cranes (including hoists and winches) Mobile and vehicle-loading cranes
AS/NZS 1873.3:1994	Powder-actuated (PA) hand-held fastening tools - Charges
AS/NZS 1873.1:1994	Powder-actuated (PA) hand-held fastening tools Selection, operation and maintenance
AS 2370-1980	PVAC emulsion adhesives for wood
AS 2214-1994	Certification of welding supervisors - Structural steel welding
AS 1101.3-1987	Graphical symbols for general engineering - Welding and non-destructive examination
AS 2074-1982	Steel castings
AS/NZS 1553.1:1995	Covered electrodes for welding - Low carbon steel electrodes for manual metal-arc welding of carbon steels and carbon-manganese steels
AS 1530.4-1990	Methods for fire tests on building materials, components and structures Fire-resistance tests of elements of building construction
AS/NZS 2717.1:1996	Welding - Electrodes - Gas metal arc - Ferritic steel electrodes
AS 3600-1994	Concrete structures
AS/NZS 1554.1:1995	Structural steel welding Welding of steel structures
AS 2214-2004	Certification of welding supervisors - Structural steel welding
AS/NZS 1170.2:2002	Structural design actions Wind actions
AS/NZS 3679.2:1996	Structural steel Welded I sections
AS/NZS 1873.1:2003	Powder-actuated (PA) hand-held fastening tools - Selection, operation and maintenance
AS 1391-1991	Methods for tensile testing of metals
AS 1170.4-1993	Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads
AS/NZS 1170.1:2002	Structural design actions Permanent, imposed and other actions
AS 2670.1-1990	Evaluation of human exposure to whole-body vibration General requirements
AS/NZS 1873.2:1994	Powder-actuated (PA) hand-held fastening tools Design and construction
AS/NZS 1873.3:2003	Powder-actuated (PA) hand-held fastening tools - Charges
AS/NZS 1594:2002	Hot-rolled steel flat products (Reconfirmed 2016)
AS 1275-1985
AS 1735.1-1999	Lifts, escalators and moving walks - General requirements
AS/NZS 1110:1995	ISO metric precision hexagon bolts and screws
AS 1101.3-2005	Graphical symbols for general engineering Welding and non-destructive examination
AS/NZS 1559:1997	Hot-dip galvanized steel bolts and associated nuts and washers for tower construction
AS 1170.1-1981	Minimum design loads on structures (known as the SAA Loading Code) Dead and live loads
AS 1210-1997	Pressure vessels
AS/NZS 1111:1996	ISO metric hexagon commercial bolts and screws
AS/NZS 1594:1997	Hot-rolled steel flat products
AS 2327.1-1996	Composite structures - Simply supported beams
AS 1163-1991	Structural steel hollow sections
AS/NZS 1252:1996	High-strength steel bolts with associated nuts and washers for structural engineering
AS 1554.2-1993	Structural steel welding - Stud welding (steel studs to steel)
AS/NZS 1554.5:2004	Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 1170.4-2007	Structural design actions Earthquake actions in Australia (Reconfirmed 2018)
AS 1418.1-2002	Cranes, hoists and winches General requirements
AS 2327.1-2003	Composite structures Simply supported beams
AS/NZS 1554.1:2004	Structural steel welding Welding of steel structures
AS 2670.1-2001	Evaluation of human exposure to whole-body vibration General requirements (Reconfirmed 2016)
AS 1657-1992	Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 3678:1996	Structural steel - Hot-rolled plates, floorplates and slabs
AS/NZS 3679.1:1996	Structural steel Hot-rolled bars and sections
AS 1530.4-2005	Methods for fire tests on building materials, components and structures Fire-resistance test of elements of construction
AS 1210-1989

AS 3995-1994	Design of steel lattice towers and masts
AS 2304:2019	Water storage tanks for fire protection systems
AS 1988.1-2006	Welding of ferrous castings - Steel castings
AS/NZS 4676:2000	Structural design requirements for utility services poles
AS/NZS 1576.1:2010	Scaffolding General requirements
AS 1418.18-2001	Cranes, hoists and winches Crane runways and monorails
AS 1940:2017	The storage and handling of flammable and combustible liquids
AS/NZS 1554.1:2004	Structural steel welding Welding of steel structures
AS/NZS 1577:2013	Scaffold decking components
AS/NZS 2041.6:2010	Buried corrugated metal structures Bolted plate structures
AS 2159-1995	Piling - Design and installation
AS 2159-1995	Piling - Design and installation
AS 4326-2008	The storage and handling of oxidizing agents
AS/NZS 1163:2016	Cold-formed structural steel hollow sections
AS 4425-1996	Above ground burial structures
AS 1725.3-2010	Chain link fabric fencing Tennis court fencing - Private/Residential (Reconfirmed 2020)
AS 1657-2013	Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS/NZS 4613:2017	Automotive equipment - Brake force measuring instruments
AS 5047-2005	Hydraulic shoring and trench lining equipment
AS 5100.6 SUPP 1-2007	Bridge design Steel and composite construction - Commentary (Supplement to AS 5100.6 - 2004)
AS/NZS 1100.501:2002	Technical drawing Structural engineering drawing (Reconfirmed 2014)
AS 4744.1-2000	Steel shoring and trench lining - Design
AS/NZS 7000:2016	Overhead line design
AS 3780-1994	The storage and handling of corrosive substances
AS 2214-2004	Certification of welding supervisors - Structural steel welding
AS 3610-1995	Formwork for concrete
AS/NZS 1554.4:2004	Structural steel welding - Welding of high strength quenched and tempered steels
AS/NZS 5070.1:2008	Siting and operation of radiocommunications facilities General guidelines for fixed, mobile and broadcasting facilities including fixed location satellite earth stations independent of the operating frequency (Reconfirmed 2019)
AS/NZS 4677:2010	Steel utility services poles
AS/NZS 1576.1:1995	Scaffolding General requirements
AS/NZS 1554.7:2006	Structural steel welding Welding of sheet steel structures
AS 1530.4-2005	Methods for fire tests on building materials, components and structures Fire-resistance test of elements of construction
AS/NZS 4994.1(INT):2004	Temporary roof edge protection for housing and residential buildings General requirements
AS 4997-2005	Guidelines for the design of maritime structures
AS 1210-2010	Pressure vessels (Reconfirmed 2021)
AS/NZS 4600:2005	Cold-formed steel structures
AS/NZS 1554.5:2011	Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 4084-2012	Steel storage racking
AS 4722-2009	Passenger ropeways and passenger conveyors
AS 3785.8-1994	Underground mining - Shaft equipment Personnel conveyances in other than vertical shafts
AS/NZS 4994.4:2018	Temporary edge protection Perimeter Protection Screens
AS 1692-2006	Steel tanks for flammable and combustible liquids (Reconfirmed 2016)
AS 2870-2011	Residential slabs and footings
AS/NZS 3679.2:2016	Structural steel Welded I sections
AS/NZS 1554.4:2010	Structural steel welding Welding of high strength quenched and tempered steels
AS 4324.1-1995	Mobile equipment for continuous handling of bulk materials - General requirements for the design of steel structures
AS 2809.2:2020	Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids
AS/NZS 1554.6:2012	Structural steel welding Welding stainless steels for structural purposes
AS 2550.11-2004	Cranes, hoists and winches - Safe use Vehicle-loading cranes
AS 2809.5-2001	Road tank vehicles for dangerous goods Tankers for bitumen-based products
AS 2159-2009	Piling - Design and installation
AS 2809.2-1999	Road tank vehicles for dangerous goods - Tankers for flammable liquids
AS/NZS 3678:2016	Structural steel - Hot-rolled plates, floorplates and slabs
AS 1418.1-2002	Cranes, hoists and winches General requirements
AS 1940-2004	The storage and handling of flammable and combustible liquids
AS 3533.3-2003	Amusement rides and devices In-service inspection (Reconfirmed 2013)
AS 5216:2018	Design of post-installed and cast-in fastenings in concrete
AS 3700:2018	Masonry Structures
AS 4326-1995	The storage and handling of oxidizing agents
AS/NZS 1252.1:2016	High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers Technical requirements
SA HB 108-2013	Timber design handbook
AS 1657-1992	Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 4773.2-2010	Masonry in small buildings - Construction
AS/NZS 2041.2:2011	Buried corrugated metal structures Installation
AS 3610 SUPP 2-1996	Formwork for concrete - Commentary (Supplement to AS 3610-1995)
AS/NZS 3679.1:2016	Structural steel Hot-rolled bars and sections
AS 2067-2008	Substations and high voltage installations exceeding 1 kV a.c.
AS/NZS 2699.3:2000	Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS 1725.4-2010	Chain link fabric fencing Cricket net fencing enclosures (Reconfirmed 2020)
AS 2809.4-2001	Road tank vehicles for dangerous goods - Tankers for toxic and corrosive cargoes
AS 4678-2002	Earth-retaining structures
AS 3780-2008	The storage and handling of corrosive substances
AS 1577-1993	Scaffold planks
AS/NZS 2312:2002	Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings
AS 3700-2011	Masonry structures
AS/NZS 4677:2000	Steel utility services poles
AS 2192-2002	Sterilizers - Steam - Downward-displacement
AS 1725.2-2010	Chain link fabric fencing Tennis court fencing - Commercial (Reconfirmed 2020)
AS 2809.2-2008	Road tank vehicles for dangerous goods Road tank vehicles for flammable liquids
AS 4852.1-2009	Variable message signs Fixed signs
AS 2327.1-2003	Composite structures Simply supported beams
AS/NZS 2699.3:2002	Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS 3533.1-2009	Amusement rides and devices Design and construction
AS 1576.4-1991	Scaffolding Suspended scaffolding
AS/NZS 3679.1:1996	Structural steel Hot-rolled bars and sections
AS 2316.1-2009	Artificial climbing structures and challenge courses Fixed and mobile artificial climbing and abseiling walls
AS 2699.3:2020	Built-in components for masonry construction Lintels and shelf angles (durability requirements)
AS 1576.6:2020	Scaffolding Metal tube-and-coupler scaffolding - Deemed to conform to AS/NZS 1576.1
AS/NZS 1554.5:2004	Structural steel welding Welding of steel structures subject to high levels of fatigue loading
AS 1720.1-1997	Timber structures Design methods
AS/NZS 7000:2010	Overhead line design - Detailed procedures
AS 1725.1-2010	Chain link fabric fencing Security fences and gates - General requirements (Reconfirmed 2020)
AS/NZS 1577:2018	Scaffold decking components
AS 3785.6-1992	Underground mining - Shaft equipment Guides and rubbing ropes for conveyances
AS 2067:2016	Substations and high voltage installations exceeding 1 kV a.c.
AS 4100 SUPP 1-1999	Steel structures - Commentary (Supplement to AS 4100-1998)
AS 1210-1997	Pressure vessels
AS 1228:2016	Pressure equipment - Boilers
AS/NZS 3679.1:2010	Structural steel Hot-rolled bars and sections
AS 4425:2020	Above‑ground burial structures
AS/NZS 2927:2001	The storage and handling of liquefied chlorine gas
AS/NZS 3785.8:2016	Underground mining - Shaft equipment Conveyances for inclined shafts
AS/NZS 1554.1:2000	Structural steel welding Welding of steel structures
AS/NZS 3785.4:2002	Underground mining - Shaft equipment Conveyances for vertical shafts
AS 2339:2017	Traffic signal posts, mast arms and attachments
AS 1562.1-1992	Design and installation of sheet roof and wall cladding Metal (Reconfirmed 2016)
AS 3785.5-1998	Underground mining - Shaft equipment Headframes
AS 1562.3-2006	Design and installation of sheet roof and wall cladding Plastic (Reconfirmed 2018)
AS 1170.4-2007	Structural design actions Earthquake actions in Australia (Reconfirmed 2018)
AS/NZS 2179.1:1994	Specifications for rainwater goods, accessories and fasteners Metal shape or sheet rainwater goods, and metal accessories and fasteners
AS 1720.1-2010	Timber structures Design methods
AS/NZS 3678:1996	Structural steel - Hot-rolled plates, floorplates and slabs
AS/NZS 5131:2016	Structural steelwork - Fabrication and erection
AS 3958.2-1992	Ceramic tiles Guide to the selection of a ceramic tiling system
AS/NZS 3679.2:1996	Structural steel Welded I sections
AS/NZS 3679.2:2010	Structural steel Welded I sections
AS 3962-2001	Guidelines for design of marinas
AS/NZS 3678:2011	Structural steel - Hot-rolled plates, floorplates and slabs
AS 1657:2018	Fixed platforms, walkways, stairways and ladders - Design, construction and installation
AS 3785.7-2006	Underground mining - Shaft equipment Sheaves (Reconfirmed 2023)
AS 2304-2011	Water storage tanks for fire protection systems
AS/NZS 1554.1:2011	Structural steel welding Welding of steel structures
AS/NZS 5100.6:2017	Bridge design Steel and composite construction
AS 2979-1998	Traffic signal mast arms
AS 4324.1:2017	Mobile equipment for continuous handling of bulk materials General requirements for the design of steel structures
AS 1725.5-2010	Chain link fabric fencing Sports ground fencing - General requirements (Reconfirmed 2020)
AS/NZS 4994.1:2009	Temporary edge protection General requirements

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

AS 4100-1998

Steel structures (Reconfirmed 2016)

Abstract

General Product Information

Scope

History

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory