AS 4087-1996
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Metallic flanges for waterworks purposes
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
05-29-2024
06-05-1996
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies flanges principally intended for waterworks purposes, with working and test pressures for Classes 14, 16, 21 or 35 at temperatures not exceeding 80 degrees Celsius, that have bolting details compatible with the appropriate table of AS 2129. Dimensions are given for copper alloy plate and integral without neck flanges, ductile cast iron screw-on and integral with neck flanges, grey cast iron integral with neck (for pipe fittings) and integral without neck (for other than pipe fittings) flanges and steel blank, plate and integral without neck flanges for ranges of DN (nominal size) and class. Specifies grades of material and requirements for selection of bolting and assembly of flanged joints.
| Committee |
WS-022
|
| DocumentType |
Standard
|
| ISBN |
0 7337 0458 1
|
| Pages |
23
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
This Standard specifies requirements for circular flanges manufactured from copper alloy, ductile cast iron, grey cast iron, or steel. It covers nominal sizes (see Table 2.1) with pressure ratings for Classes 14, 16, 21 or 35 at temperatures not exceeding 80C. The flanges are for use on pipes, pipe fittings, valves and other equipment that are primarily intended for the conveyance or storage of water or wastewater. NOTE: Guidelines to purchasers on information that should be supplied at the time of enquiry ororder are detailed in Appendix A.
First published as AS 4087-1993.
Second edition 1996.
| AS 1112-1980 | ISO metric hexagon nuts, including thin nuts, slotted nuts and castle nuts |
| AS/NZS 2280:1999 | Ductile iron pressure pipes and fittings |
| AS 1214-1983 | Hot-dip galvanized coatings on threaded fasteners (ISO metric coarse thread series) |
| AS 1831-1985 | Iron castings - Spheroidal or nodular graphite cast iron |
| AS 2129-1994 | Flanges for pipes, valves and fittings |
| AS/NZS 4331.3:1995 | Metallic flanges Copper alloy and composite flanges (Reconfirmed 2020) |
| AS 1646-1992 | Elastomeric seals for waterworks purposes |
| AS 2382-1981 | Surface roughness comparison specimens |
| AS 2536-1982 | Surface texture |
| AS 2528-1982 | Bolts, studbolts and nuts for flanges and other high and low temperature applications |
| AS/NZS 4331.2:1995 | Metallic flanges Cast iron flanges (Reconfirmed 2020) |
| AS 1830-1986 | Iron castings - Grey cast iron |
| AS 1111-1980 | ISO metric hexagon commercial bolts and screws |
| AS 1565-1996 | Copper and copper alloys - Ingots and castings (Reconfirmed 2020) |
| AS/NZS 4331.1:1995 | Metallic flanges Steel flanges (Reconfirmed 2020) |
| AS 3855-1994 | Suitability of plumbing and water distribution systems products for contact with potable water |
| AS 2074-1982 | Steel castings |
| AS 1449-1994 | Wrought alloy steels - Stainless and heat-resisting steel plate, sheet and strip |
| AS 3678-1990 | Structural steel - Hot-rolled plates, floorplates and slabs |
| AS 2845.1-1995 | Water supply - Backflow prevention devices - Materials, design and performance requirements |
| AS/NZS 4766(INT):2002 | Polyethylene storage tanks for water and chemicals |
| AS 4181-1999 | Stainless steel clamps for waterworks purposes |
| AS 3565.1-2004 | Meters for water supply Cold water meters |
| AS 4181-1994 | Stainless steel clamps for waterworks purposes |
| AS 3565.1-1998 | Meters for cold potable water - Volumetric chamber and turbine meters |
| AS 3565.2-1996 | Meters for cold potable water - Combination meters |
| ATS 5200.020-2004 | Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with mains supply |
| AS 1579-1993 | Arc welded steel pipes and fittings for water and waste water |
| ATS 5200.464-2004 | Technical Specification for plumbing and drainage products - Hot water manual or sensor-activated pumping systems |
| AS/NZS 3500.4:2003 | Plumbing and drainage Heated water services |
| AS/NZS 3500.2:2003 | Plumbing and drainage Sanitary plumbing and drainage |
| AS/NZS 2544:1995 | Grey iron pressure fittings |
| AS 3565.2-2004 | Meters for water supply - Combination meters |
| AS 4809-2003 | Copper pipe and fittings - Installation and commissioning |
| AS/NZS 3500.3:2003 | Plumbing and drainage Stormwater drainage |
| AS/NZS 3518:2004 | Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications |
| AS 2638.2-1999 | Sluice valves for waterworks purposes Resilient seated |
| MP 52-1997 | Manual of authorization procedures for plumbing and drainage products |
| AS 1628-1994 | Water supply - Copper alloy gate, globe and non-return valves |
| AS 4795-2002 | Double-flanged butterfly valves for waterworks purposes |
| ATS 5200.021-2004 | Technical Specification for plumbing and drainage products Flushing valves for water closets and urinals - for use with break tank supply |
| ATS 5200.466-2004 | Technical Specification for plumbing and drainage products - Rainwater tank connection devices |
| AS/NZS 2280:2004 | Ductile iron pipes and fittings |
| AS 6401-2003 | Knife-gate valves for waterworks purposes (Reconfirmed 2015) |
| AS 3497-1994 | Authorization requirements for plumbing products - Domestic type water treatment appliances |
| AS 2638.1-2002 | Gate valves for waterworks purposes Metal seated |
| AS 2129-1994 | Flanges for pipes, valves and fittings |
| AS/NZS 2280:1995 | Ductile iron pressure pipes and fittings |
| AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS 3565.1-1994 | Meters for cold potable water Volumetric chamber and turbine meters |
| AS/NZS 3497:1998 | Drinking water treatment units - Plumbing requirements |
| AS 1210-1997 | Pressure vessels |
| MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
| AS 2638.2-2002 | Gate valves for waterworks purposes - Resilient seated |
| AS 3952-2002 | Water supply - Spring hydrant valve for waterworks purposes (Reconfirmed 2015) |
| AS 3578-1993 | Cast iron non-return valves for general purposes |
| AS 2638.1-1999 | Sluice valves for waterworks purposes Metal seated |
| AS 3565.3-2004 | Meters for water supply - Water meters with integral dual check valves |
| AS/NZS 3500.1:2003 | Plumbing and drainage Water services |
| AS/NZS 2566.2:2002 | Buried flexible pipelines Installation (Reconfirmed 2016) |
| AS 4794-2001 | Non-return valves for waterworks purposes - Swing check and tilting disc (Reconfirmed 2015) |
| AS/NZS 2280:1999 | Ductile iron pressure pipes and fittings |
| AS 1579-2001 | Arc-welded steel pipes and fittings for water and wastewater (Reconfirmed 2018) |
| AS/NZS 3500.3.2:1998 | National plumbing and drainage Stormwater drainage - Acceptable solutions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.