AS 3996-2006
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Access covers and grates
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
07-29-2024
English
03-02-2006
Specifies requirements for access covers and grates for use in vehicular and pedestrian areas. It applies particularly to components manufactured from grey and ductile irons and cast and manufactured steels and other materials, and access covers and grates having clear openings ranging from 100 mm to 1300 mm. It is intended for use by designers, purchasers, manufacturers and installers of access covers and grates.
Committee |
CE-029
|
DocumentType |
Standard
|
ISBN |
0 7337 7291 9
|
Pages |
34
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard specifies requirements for access covers and grates for use in vehicular and pedestrian areas. It applies to access covers and grates having clear openings up to 1300mm, particularly to components manufactured from grey and ductile irons, cast and manufactured steels, aluminium and concrete. However, the use of other materials is not precluded.NOTES:1 Use of other materials is covered in Clause2.8.2 The hydraulic design of access covers and grates is not within the scope of this Standard.
Originated as AS 3996-1992.
Second edition 2006.
AS 1831-2007 | Ductile cast iron (Reconfirmed 2017) |
AS/NZS 4680:2006 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017) |
AS 1830-2007 | Grey cast iron (Reconfirmed 2017) |
AS 5100.2-2004 | Bridge design Design loads |
AS 1831-2002 | Ductile cast iron |
AS/NZS 1554.1:2004 | Structural steel welding Welding of steel structures |
HB 18.28-2005 | Conformity assessment - Guidance on a third-party certification system for products |
AS 1830-2002 | Grey cast iron |
AS/NZS 3678:1996 | Structural steel - Hot-rolled plates, floorplates and slabs |
AS/NZS 3679.1:1996 | Structural steel Hot-rolled bars and sections |
AS/NZS 2865:2001 | Safe working in a confined space |
AS 1199.1-2003 | Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016) |
AS 1379-2007 | Specification and supply of concrete (Reconfirmed 2017) |
AS 1874-2000 | Aluminium and aluminium alloys - Ingots and castings (Reconfirmed 2018) |
AS 1428.2-1992 | Design for access and mobility Enhanced and additional requirements - Buildings and facilities (Reconfirmed 2015) |
AS/NZS 4680:1999 | Hot-dip galvanized (zinc) coatings on fabricated ferrous articles |
AS 3600-2001 | Concrete structures |
AS 1379-1997 | Specification and supply of concrete |
ATS 5200.499-2008 | Technical Specification for plumbing and drainage products Inline sewer dosing unit (SDU) |
AS 5200.000-2006 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018) |
AS/NZS 3500.5:2012 | Plumbing and drainage Housing installations |
MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
AS/NZS 3500.3:2003 | Plumbing and drainage Stormwater drainage |
AS/NZS 3084:2003 | |
AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
AS/NZS 3084:2017 | Telecommunications installations - Telecommunications pathways and spaces for commercial buildings |
SA/SNZ HB 252:2014 | Communications cabling manual - Module 3: Residential communications cabling handbook |
AS 4198-1994 | Precast concrete access chambers for sewerage applications |
AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.