AS 3972-2010
Current
The latest, up-to-date edition.
General purpose and blended cements
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
10-22-2010
Specifies minimum requirements for hydraulic cements including general purpose cement, general purpose limestone, and blended cement. Requirements include both the composition as well as the properties and performance of the cement. A sampling and testing regime is specified for product conformity claims.
Committee |
BD-010
|
DocumentType |
Standard
|
ISBN |
978 0 7337 9698 2
|
Pages |
19
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard specifies minimum requirements for hydraulic cements including general purpose and blended cements. It does not purport to provide for all the requirements that may be needed in specific applications of such cements.NOTES:1 Information on the interpretation of this Standard as a performance-based specification of cement is given in Appendix A.2 Some additional information on applications and limitation of this Standard is included in the Preface.
Originated in part as AS A2-1925.
Previous edition AS 3972-1997.
Third edition 2010.
AS 2350.13-2006 | Methods of testing portland, blended and masonry cements Determination of drying shrinkage of cement mortars |
AS 2350.7-2006 | Methods of testing portland, blended and masonry cements Determination of temperature rise during hydration of portland and blended cements |
AS 3583.13-1991 | Methods of test for supplementary cementitious materials for use with portland cement Determination of chloride ion content (Reconfirmed 2016) |
AS/NZS 2350.16:2006 | Methods of testing portland, blended and masonry cements Determination of air content of masonry cement (Reconfirmed 2016) |
AS/NZS 3582.3:2002 | Supplementary cementitious materials for use with portland and blended cement Amorphous silica |
AS 2350.14-2006 | Methods of testing portland, blended and masonry cements Length change of cement mortars exposed to sulfate solution |
AS 2350.9-2006 | Methods of testing portland, blended and masonry cements Determination of residue on the 45 μm sieve |
AS 3582.1-1998 | Supplementary cementitious materials for use with portland and blended cement Fly ash |
AS/NZS 2350.8:2006 | Methods of testing portland, blended and masonry cements Fineness index by air permeability method (Reconfirmed 2016) |
AS/NZS 2350.4:2006 | Methods of testing portland, blended and masonry cements Setting time (Reconfirmed 2016) |
AS/NZS 2350.5:2006 | Methods of testing portland, blended and masonry cements Determination of soundness (Reconfirmed 2016) |
AS 3600 SUPP 1-1994 | Concrete structures - Commentary (Supplement to AS 3600-1994) |
AS 3600-2009 | Concrete structures |
AS/NZS 2350.11:2006 | Methods of testing portland, blended and masonry cements Compressive strength |
AS/NZS 2350.1:2006 | Methods of testing portland, blended and masonry cements Sampling |
AS/NZS 2350.18:2006 | Methods of testing portland, blended and masonry cements Determination of water retention of masonry cement |
AS 3582.2-2001 | Supplementary cementitious materials for use with portland and blended cement Slag - Ground granulated iron blast-furnace |
AS 2350.2-2006 | Methods of testing portland, blended and masonry cements Chemical composition (Reconfirmed 2016) |
AS/NZS 2350.17:2006 | Methods of testing portland, blended and masonry cements Determination of soundness of masonry cement |
AS 1085.14-2012 | Railway track material Prestressed concrete sleepers |
AS 2150:2020 | Asphalt - A guide to good practice |
AS 3583.6:2018 | Methods of test for supplementary cementitious materials Determination of relative water requirement and strength index |
AS 1597.2-2013 | Precast reinforced concrete box culverts Large culverts (exceeding 1200 mm span or 1200 mm height and up to and including 4200 mm span and 4200 mm height) |
AS 1172.2:2014 | Sanitary plumbing products Flushing devices and cistern inlet and outlet valves |
AS 3700:2018 | Masonry Structures |
AS 3700-2011 | Masonry structures |
AS 1141.60.2:2014 | Methods for sampling and testing aggregates Potential alkali-silica reactivity - Concrete prism method |
SA HB 84:2018 | Guide to concrete repair and protection |
AS 5100.5:2017 | Bridge design Concrete |
AS 4204:2019 | Headstones and cemetery monuments |
AS/NZS 2280:2014 | Ductile iron pipes and fittings |
AS/NZS 2280:2020 | Ductile iron pipes and fittings |
AS 4425:2020 | Above‑ground burial structures |
AS/NZS 2280:2012 | Ductile iron pipes and fittings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.