AS 3855-1994
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Suitability of plumbing and water distribution systems products for contact with potable water
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
06-30-2017
06-20-1994
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies basic requirements for plumbing and water distribution systems products in contact with hot or cold potable water, or both.
| Committee |
B-000
|
| DocumentType |
Standard
|
| ISBN |
0 7262 8996 5
|
| Pages |
2
|
| PublisherName |
Standards Australia
|
| Status |
Withdrawn
|
| Supersedes |
This Standard specifies basic requirements for plumbing and water distribution system products in contact with hot or cold potable water, or both. It also specifies requirements that all metallic materials contain not more than 4.5% lead by 1 January 1995, pending compliance with AS 4020(Int) within two years from its publication as a full Standard.
First published as part of MP 52-1988.
Second edition 1990.
MP 52-1990 revised and redesignated in part as AS 3855(Int)-1990.
Second edition 1992.
Revised and issued as AS 3855-1994.
| AS 1631-1994 | Cast grey and ductile iron non-pressure pipes and fittings (Reconfirmed 2018) |
| AS 2845.1-1995 | Water supply - Backflow prevention devices - Materials, design and performance requirements |
| AS 1281-2001 | Cement mortar lining of steel pipes and fittings (Reconfirmed 2018) |
| AS 2419.2-1991 | Fire hydrant installations - Fire hydrant valves |
| AS 4087-1993 | Metallic flanges for waterworks purposes |
| AS 3496-1999 | Metal-bodied and plastic-bodied taps |
| AS 4181-1999 | Stainless steel clamps for waterworks purposes |
| AS 3795-1996 | Copper alloy tubes for plumbing and drainage applications |
| AS/NZS 4158.1:1994 | Polymeric coatings on valves and fittings for water industry purposes Thermal-bonded coatings |
| AS 4181-1994 | Stainless steel clamps for waterworks purposes |
| AS 3688-1994 | Water supply - Copper and copper alloy body compression and capillary fittings and threaded-end connectors |
| AS 3565.1-1998 | Meters for cold potable water - Volumetric chamber and turbine meters |
| AS/NZS 3500.1.2:1998 | National plumbing and drainage Water supply - Acceptable solutions |
| AS/NZS 2642.2:1994 | Polybutylene pipe systems - Polybutylene (PB) pipe for hot and cold water applications |
| AS 1579-1993 | Arc welded steel pipes and fittings for water and waste water |
| AS 4131(INT)-1993 | PE pipe compounds |
| AS 2419.2-1994 | Fire hydrant installations Fire hydrant valves |
| AS 2492-1994 | Cross-linked polyethylene (PE-X) pipe for hot and cold water applications |
| AS/NZS 3879:1995 | Solvent cements and priming fluids for use with unplasticized PVC (uPVC) pipes and fittings |
| AS/NZS 4765(INT):2000 | Modified PVC (PVC-M) pipes for pressure applications |
| AS/NZS 1477:1996 | PVC pipes and fittings for pressure applications |
| AS/NZS 2544:1995 | Grey iron pressure fittings |
| AS/NZS 3499:1997 | Flexible tube connectors for water supply |
| AS 4087-1996 | Metallic flanges for waterworks purposes |
| AS 1646.1-2000 | Elastomeric seals for waterworks purposes - General requirements |
| AS 3565.3-1998 | Meters for cold potable water - Water meters with integral dual check valves |
| AS 4321-2001 | Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings (Reconfirmed 2019) |
| AS/NZS 4130:1997 | Polyethylene (PE) pipes for pressure applications |
| AS 2638.2-1999 | Sluice valves for waterworks purposes Resilient seated |
| MP 52-1997 | Manual of authorization procedures for plumbing and drainage products |
| AS/NZS 4131:1997 | Polyethylene (PE) compounds for pressure pipes and fittings |
| AS/NZS 4158:1996 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes |
| AS 1628-1994 | Water supply - Copper alloy gate, globe and non-return valves |
| AS 4441(INT)-1996 | Oriented PVC (OPVC) pipes for pressure applications |
| AS 2845.2-1996 | Water supply - Backflow prevention devices Air gaps and break tanks |
| AS 1910-1994 | Water supply - Float control valves for use in hot and cold water |
| AS 4176-1994 | Polyethylene/aluminium and cross-linked polyethylene/aluminium macro-composite pipe systems for pressure applications |
| AS/NZS 1477:1999 | PVC pipes and fittings for pressure applications |
| AS 1432-1996 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS 1361-1995 | Electric heat-exchange water heaters - For domestic applications (Reconfirmed 2016) |
| AS 4032-1998 | Thermostatic mixing valves - Materials, design and performance requirements |
| AS 3499-1995 | Authorization requirements for plumbing products - Flexible tubes |
| AS/NZS 4129:2000 | Fittings for polyethylene (PE) pipes for pressure applications |
| AS/NZS 2642.3:1994 | Polybutylene pipe systems Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications |
| AS 1357.2-1998 | Valves primarily for use in warm and hot water systems - Control valves |
| AS 2698.2-2000 | Plastics pipes and fittings for irrigation and rural applications Polyethylene rural pipe (Reconfirmed 2017) |
| AS 3498-1995 | Authorization requirements for plumbing products - Water heaters and hot-water storage tanks |
| AS 1172.2-1999 | Water closet (WC) pans of 6/3 L capacity or proven equivalent Cisterns |
| AS 2537-1994 | Mechanical jointing fittings for use with cross-linked polyethylene (PE-X) pipe for hot and cold water applications |
| AS/NZS 4348:1995 | Water supply - Domestic type water treatment appliances - Performance requirements |
| AS/NZS 2280:1995 | Ductile iron pressure pipes and fittings |
| AS/NZS 2642.1:1994 | Polybutylene pipe systems - Polybutylene (PB) pipe extrusion compounds |
| AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS 3565.1-1994 | Meters for cold potable water Volumetric chamber and turbine meters |
| AS/NZS 3497:1998 | Drinking water treatment units - Plumbing requirements |
| AS 4321-1995 | Fusion-bonded medium-density polyethylene coating and lining for pipes and fittings |
| MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
| AS/NZS 4129(INT):1997 | Fittings for polyethylene (PE) pipes for pressure applications |
| AS 3578-1993 | Cast iron non-return valves for general purposes |
| AS/NZS 4327:1995 | Metal-banded flexible couplings for low-pressure applications (Reconfirmed 2020) |
| AS 2638.1-1999 | Sluice valves for waterworks purposes Metal seated |
| AS 3496-1995 | Authorization requirements for plumbing products - Metal-bodied and plastic-bodied taps |
| AS/NZS 1516:1994 | The cement mortar lining of pipelines in situ (Reconfirmed 2020) |
| AS/NZS 3718:1997 | Water supply - Metal-bodied taps - Specified by performance |
| AS 1281-1993 | Cement mortar lining of steel pipes and fittings |
| AS/NZS 3666.1:1995 | Air-handling and water systems of buildings - Microbial control Design, installation and commissioning |
| AS 4794-2001 | Non-return valves for waterworks purposes - Swing check and tilting disc (Reconfirmed 2015) |
| AS 2419.3-1996 | Fire hydrant installations - Fire brigade booster connections |
| AS/NZS 2280:1999 | Ductile iron pressure pipes and fittings |
| AS/NZS 3500.3.2:1998 | National plumbing and drainage Stormwater drainage - Acceptable solutions |
| AS 4032-1995 | Thermostatic mixing valves - Materials, design and performance requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.