AS 3648-1993
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Specification and methods of test for packaged concrete mixes
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
06-06-2019
English
01-01-1993
Important note : All end users must be registered with an Account prior to user licenses being assigned.Specifies requirements for packaged solid ingredients of dense-weight concrete in small quantities (20 kg to 40 kg), intended for use in domestic applications where a particular concrete strength is not an essential consideration. Does not apply to packaged mortar, or grouts, or concrete intended for structural purposes. Appendices give relevant test methods for package materials, packages, concrete made from the contents and examples of instructions for use.
| Committee |
BD-049
|
| DocumentType |
Standard
|
| ISBN |
0 7262 8363 0
|
| Pages |
18
|
| ProductNote |
Withdrawn 06-06-2019.
|
| PublisherName |
Standards Australia
|
| Status |
Withdrawn
|
| Supersedes |
This Standard specifies minimum requirements for the solid ingredients of dense weight concrete and for packaging appropriate proportions of these which, when mixed with water, will produce a volume of plastic concrete not exceeding 20 L (0.020 m3) from each pack. Relevant methods of test are given in the Appendices.This Standard does not apply to packaged mixtures of sand and cement intended for use as mortar or plaster, or to mixtures of ingredients for concrete required to comply with AS 3600. NOTE: Methods for demonstrating compliance with this Standard are given in Appendix A.
First published as AS 3648-1993.
| AS 2758.1-1998 | Aggregates and rock for engineering purposes - Concrete aggregates |
| AS 1141.6.1-1995 | Methods for sampling and testing aggregates Particle density and water absorption of coarse aggregate - Weighing-in-water method |
| AS 1012.9-1999 | Methods of testing concrete Determination of the compressive strength of concrete specimens |
| AS 1152-1993 | Specification for test sieves |
| AS 3900.1-1987 | Quality management and quality assurance Standards Guidelines for selection and use |
| AS 2582.4-2003 | Complete, filled transport packages - Methods of test Vertical impact test by dropping (Reconfirmed 2020) |
| AS 1012.18-1996 | Methods of testing concrete Determination of setting time of fresh concrete, mortar and grout by penetration resistance (Reconfirmed 2014) |
| AS 3582.2-2001 | Supplementary cementitious materials for use with portland and blended cement Slag - Ground granulated iron blast-furnace |
| AS 1141.6.2-1996 | Methods for sampling and testing aggregates Particle density and water absorption of coarse aggregate - Pycnometer method (Reconfirmed 2016) |
| AS 1478-1992 | Chemical admixtures for concrete |
| AS 3904.1-1987 | Quality management and quality system elements Guidelines |
| AS 3600-2001 | Concrete structures |
| AS 1141.6.1-2000 | Methods for sampling and testing aggregates Particle density and water absorption of coarse aggregate - Weighing-in-water method (Reconfirmed 2016) |
| AS 3582.1-1998 | Supplementary cementitious materials for use with portland and blended cement Fly ash |
| AS 3972-1997 | Portland and blended cements |
| AS 2582.4-1983 | Complete, filled transport packages - Methods of test - Vertical impact test by dropping |
| AS 1141.11-1996 | Methods for sampling and testing aggregates Particle size distribution by sieving |
| AS 1141.22-1996 | Methods for sampling and testing aggregates Wet/dry strength variation |
| AS 1012.5-1999 | Methods of testing concrete Determination of mass per unit volume of freshly mixed concrete |
| AS 3582.2-1991 | Supplementary cementitious materials for use with portland cement Slag - Ground granulated iron blast-furnace |
| HB 18.44-1991 | Guidelines for third-party certification and accreditation - Guide 44: General rules for ISO or IEC international third-party certification schemes for products |
| AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
| AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
| AS 1012.20-1992 | Methods of testing concrete Determination of chloride and sulfate in hardened concrete and concrete aggregates |
| AS 3600-1994 | Concrete structures |
| AS 1141.2-1999 | Methods for sampling and testing aggregates Basic testing equipment |
| AS 1012.3-1983 | Methods of testing concrete Methods for the determination of properties related to the consistence of concrete |
| AS 1012.8-1986 | Methods of testing concrete Method for making and curing concrete compression, indirect tensile and flexure test specimens, in the laboratory or in the field |
| AS/NZS 3500.5:2012 | Plumbing and drainage Housing installations |
| AS/NZS 3500.3:2003 | Plumbing and drainage Stormwater drainage |
| AS/NZS 3500.3:2018 | Plumbing and drainage Stormwater drainage |
| AS/NZS 3500.5:2000 | Plumbing and Drainage Domestic installations |
| AS/NZS 3500.3:2015 | Plumbing and drainage Stormwater drainage |
| AS/NZS 3500.3.2:1998 | National plumbing and drainage Stormwater drainage - Acceptable solutions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.