AS 3600-1994
AvailableSuperseded
An Available Superseded Standard is one, which has been made available for a period of time although it has been formally superseded by another Standard. Its availability is maintained where it is referenced in legislation/regulations or in other Standards and its use should be restricted to where so referenced. No responsibility is taken by Intertek Inform as to the ongoing technical validity of such a Standard, the responsibility resting with the referencing authority.
Concrete structures
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
10-10-1994
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Sets out minimum requirements for the analysis, design and construction of concrete structures and members which contain reinforcing steel, or prestressing tendons or both, and requirements for plain concrete structures and members. The Standard applies to concrete with a characteristic compressive strength in the range of 20 MPa to 50 MPa and a density in the range 1800 kg/m(sup)3(/sup) to 2800 kgm(sup)3(/sup). Although intended mainly for building structures and members, it may also be applied to pedestrian, road and railway bridges unless otherwise required by the relevant authority. It does not apply to mass concrete structures. Design requirements are given for the limit-states of stability, strength, serviceability, durability and for resistance to fire and earthquakes. Rules are also given for assessing the compliance of concrete supplied by a manufacturer and for prototype or proof testing of finished members and structures.
| Committee |
BD-002
|
| DocumentType |
Standard
|
| ISBN |
0 7262 9082 3
|
| Pages |
145
|
| PublisherName |
Standards Australia
|
| Status |
AvailableSuperseded
|
| SupersededBy | |
| Supersedes |
This Standard sets out minimum requirements for the design and construction of concrete structures and members which contain reinforcing steel, or tendons, or both. It also sets out minimum requirements for plain concrete members.NOTE: This Standard will be referenced in the Building Code of Australia by way of BCA Amendment 7 intended for publication in November 1994, thereby superseding the previous edition, AS 3600 - 1988, which will be withdrawn 12 months from the date of publication of this edition. Users are advised that when BCA Amendment 7 is issued, it will not necessarily be gazetted in each State/Territory at the time of printing.ApplicationThis Standard is intended to apply to structures made of concrete -(a) with a characteristic compressive strength at 28 days, f c, in the range of 20 MPa to 50 MPa; and(b) of saturated, surface-dry density in the range of 1800 kg/m3to 2800 kg/m3.This Standard may be applied to concrete bridges. However, the design Standards of the relevant bridge authority, namely the Austroads Bridge Design Code for road bridges and the ANZRC Railway Bridge Design Manual for railway bridges, shall be used where applicable. The general principles of concrete design and construction embodied in this Standard may be applied to concrete other than that specified above, or to concrete structures or members not specifically mentioned herein. This Standard is not intended to apply to the design of mass concrete structures. It is also not intended that the requirements of this Standard should take precedence over those of other Australian Standards.NOTES:1 It is intended that the design of a structure or member to which this Standard applies, be carried out by, or under the supervision of, an engineer as defined in Clause 1.6.2.2 Consideration is being given to extending the application of the Standard to structures in which the characteristic compressive strength of concrete (f'c) is greater than 50 MPa. However, before such an extension could be incorporated, current research data indicates that some requirements of the Standard would need to be more stringent than those presently given and others appropriately modified.
First published in part as AS CA2-1934.
AS A26 first published 1934.
MP 13 first published 1957.
AS CA2-1934 and AS A26-1934 revised, amalgamated and designated AS CA2-1958.
Third edition 1963.
MP 13-1957 revised and redesignated AS CA35-1963.
Second edition 1973.
Fourth edition AS CA2-1973.
AS CA2-1973 revised and redesignated AS 1480-1974.
AS CA35-1973 revised and redesignated AS 1481-1974.
AS CA2-1973 and AS CA35-1973 withdrawn 1976.
Second edition AS 1481-1978.
Second edition AS 1480-1982.
AS 1480-1982 and AS 1481-1978 revised, amalgamated and redesignated AS 3600-1988.
AS 1480-1982 and AS 1481-1978 withdrawn 1991.
Second edition AS 3600-1994.
| AS 1012.16-1996 | Methods of testing concrete Determination of creep of concrete cylinders in compression (Reconfirmed 2014) |
| AS 1314-1972 | |
| AS 1311-1987 | Steel tendons for prestressed concrete-7-wire stress-relieved steel strand for tendons in prestressed concrete |
| AS 1768-1991 | Lightning protection |
| AS 1170.2-1989 | Minimum design loads on structures (known as the SAA Loading Code) Wind loads |
| AS 1554.3-1983 | Structural steel welding (known as the SAA Structural Steel Welding Code) - Welding of reinforcing steel |
| AS 1012.11-1985 | Methods of testing concrete Method for the determination of the flexural strength of concrete specimens |
| AS 1012.10-1985 | Methods of testing concrete Method for the determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting test) |
| AS 3000-1986 | Electrical installations - Buildings, structures and premises (known as the SAA Wiring Rules) |
| AS 1170.3-1990 | Minimum design loads on structures (known as the SAA Loading Code) - Snow loads |
| AS 3799-1998 | Liquid membrane-forming curing compounds for concrete (Reconfirmed 2018) |
| AS 4055-1992 | Wind loads for housing |
| AS 2870.1-1988 | Residential slabs and footings Construction |
| AS 3582.2-1991 | Supplementary cementitious materials for use with portland cement Slag - Ground granulated iron blast-furnace |
| AS 3972-1997 | Portland and blended cements |
| AS 1310-1987 | Steel wire for tendons in prestressed concrete |
| AS 1530.4-1990 | Methods for fire tests on building materials, components and structures Fire-resistance tests of elements of building construction |
| AS 2783-1992 | Use of reinforced concrete for small swimming pools |
| AS 3610-1995 | Formwork for concrete |
| AS 1379-1997 | Specification and supply of concrete |
| AS 3735-1991 | Concrete structures for retaining liquids |
| AS 1170.4-1993 | Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads |
| AS 3582.1-1998 | Supplementary cementitious materials for use with portland and blended cement Fly ash |
| AS 1012.4-1983 | Methods of testing concrete Methods for the determination of air content of freshly mixed concrete |
| AS 2758.1-1998 | Aggregates and rock for engineering purposes - Concrete aggregates |
| AS 1012.9-1999 | Methods of testing concrete Determination of the compressive strength of concrete specimens |
| AS 1012.14-1991 | Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength |
| AS 1302-1991 | Steel reinforcing bars for concrete |
| AS 1012.1-1993 | Methods of testing concrete Sampling of fresh concrete |
| AS 1313-1989 | Steel tendons for prestressed concrete - Cold-worked high-tensile alloy steel bars for prestressed concrete |
| AS 1012.12-1986 | Methods of testing concrete Method for the determination of mass per unit volume of hardened concrete |
| AS 1303-1991 | Steel reinforcing wire for concrete |
| AS 1170.1-1981 | Minimum design loads on structures (known as the SAA Loading Code) Dead and live loads |
| AS 2870.2-1990 | Residential slabs and footings Guide to design by engineering principles |
| AS 1012.13-1992 | Methods of testing concrete Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory |
| AS 1012.3-1983 | Methods of testing concrete Methods for the determination of properties related to the consistence of concrete |
| AS 1012.17-1997 | Methods of testing concrete Determination of the static chord modulus of elasticity and Poisson’s ratio of concrete specimens (Reconfirmed 2014) |
| AS 1012.20-1992 | Methods of testing concrete Determination of chloride and sulfate in hardened concrete and concrete aggregates |
| AS 1304-1991 | Welded wire reinforcing fabric for concrete |
| AS 4204-1994 | Headstones and cemetery monuments |
| AS 3516.2-1998 | Siting of radiocommunications facilities - Guidelines for fixed, mobile and broadcasting services operating at frequencies above 30 MHz |
| AS/NZS 4676:2000 | Structural design requirements for utility services poles |
| AS/NZS 1905.1:1997 | Components for the protection of openings in fire-resistant walls Fire-resistant doorsets |
| AS 3700 SUPP 4-1992 | Masonry in buildings (known as the SAA Masonry Code) - Extracts from AS 3700 - Masonry construction requirements (Supplement to AS 3700-1988) |
| AS 4065-1992 | Concrete poles for overhead lines and street lighting |
| AS 2870-1996 | Residential slabs and footings - Construction |
| AS 4060-1992 | Loads on buried vitrified clay pipes (Reconfirmed 2018) |
| AS 3826-1998 | Strengthening existing buildings for earthquake |
| AS/NZS 4548.4:1999 | Guide to long-life coatings for concrete and masonry Latex - Textured coatings - Aggregate-filled |
| AS 3700 SUPP 5-1992 | Masonry in buildings (known as the SAA Masonry Code) - Extracts from AS 3700 - Masonry housing requirements (Supplement to AS 3700-1988) |
| AS 3958.1-1991 | Ceramic tiles Guide to the installation of ceramic tiles |
| AS 2159-1995 | Piling - Design and installation |
| HB 93 SUPP 1-1997 | Commissioning of fire hydrant systems |
| AS 3660.1-1995 | Protection of buildings from subterranean termites New buildings |
| AS 4425-1996 | Above ground burial structures |
| AS/NZS 3500.1.2:1998 | National plumbing and drainage Water supply - Acceptable solutions |
| AS 3780-1994 | The storage and handling of corrosive substances |
| AS 3610-1995 | Formwork for concrete |
| AS 3700 SUPP 3-1992 | Masonry in buildings (known as the SAA Masonry Code) - Extracts from AS 3700 - Masonry materials requirements (Supplement to AS 3700-1988) |
| AS 2876-2000 | Concrete kerbs and channels (gutters) - Manually or machine placed |
| AS 1170.4-1993 | Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads |
| AS 3990-1993 | Mechanical equipment - Steelwork (Reconfirmed 2016) |
| AS 2424-1991 | Plastics building sheets - General installation requirements and design of roofing systems |
| AS/NZS 3500.2.2:1996 | National plumbing and drainage Sanitary plumbing and drainage - Acceptable solutions |
| AS 3700-1998 | Masonry structures |
| AS 3850.3-1992 | Tilt-up concrete and precast concrete elements for use in buildings - Guide to the erection of precast concrete members |
| AS 4058-1992 | Precast concrete pipes (pressure and non-pressure) |
| HB 2.2-1998 | Australian Standards for civil engineering students - Structural engineering |
| AS 2758.1-1998 | Aggregates and rock for engineering purposes - Concrete aggregates |
| AS 4326-1995 | The storage and handling of oxidizing agents |
| AS/NZS 4548.3:1999 | Guide to long-life coatings for concrete and masonry Latex - Textured coatings - Non-aggregate (Reconfirmed 2013) |
| AS 3500.1-1992 | National Plumbing and Drainage Code Water supply |
| AS 1012.17-1997 | Methods of testing concrete Determination of the static chord modulus of elasticity and Poisson’s ratio of concrete specimens (Reconfirmed 2014) |
| AS 1657-1992 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
| AS 4100-1998 | Steel structures (Reconfirmed 2016) |
| AS 3610 SUPP 2-1996 | Formwork for concrete - Commentary (Supplement to AS 3610-1995) |
| AS/NZS 4065:2000 | Concrete utility services poles |
| AS/NZS 4681:2000 | The storage and handling of Class 9 (miscellaneous) dangerous goods and articles |
| HB 67-1995 | Concrete practice on building sites |
| AS/NZS 1562.3:1996 | Design and installation of sheet roof and wall cladding Plastic |
| AS/NZS 2843.1:2000 | Timber preservation plant safety code - Plant design |
| AS 1085.14-1997 | Railway permanent way material Prestressed concrete sleepers |
| AS/NZS 1562.2:1999 | Design and installation of sheet roof and wall cladding Corrugated fibre-reinforced cement (Reconfirmed 2020) |
| AS 1735.9-1994 | Lifts, escalators and moving walks Special purpose industrial lifts |
| SAA HB 109-1998 | Slabs and footings for reinforced masonry houses |
| AS/NZS 3500.5:2000 | Plumbing and Drainage Domestic installations |
| AS 3785.5-1991 | Underground mining - Shaft equipment Headframes |
| AS 3648-1993 | Specification and methods of test for packaged concrete mixes |
| AS 1210-1997 | Pressure vessels |
| HB 93 Supp 1-1997 | Commissioning of fire hydrant systems |
| AS 1379-1991 | The specification and manufacture of concrete |
| AS 1379-1997 | Specification and supply of concrete |
| AS/NZS 3000:2000 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS/NZS 4548.2:1999 | Guide to long-life coatings for concrete and masonry Latex finish coatings - High-build, low profile (Reconfirmed 2013) |
| AS/NZS 2927:2001 | The storage and handling of liquefied chlorine gas |
| AS 3785.5-1998 | Underground mining - Shaft equipment Headframes |
| HB 31-1992 | Handbook of building construction tolerances - Extracts from building products and structures Standards |
| AS/NZS 2312:1994 | Guide to the protection of iron and steel against exterior atmospheric corrosion |
| AS 3660.1-2000 | Termite management New building work |
| AS 3958.2-1992 | Ceramic tiles Guide to the selection of a ceramic tiling system |
| AS 1418.1-1994 | Cranes (including hoists and winches) General requirements |
| AS 1597.2-1996 | Precast reinforced concrete box culverts Large culverts (from 1500 mm span and up to and including 4200 mm span and 4200 mm height) |
| AS/NZS 4548.1:1999 | Guide to long-life coatings for concrete and masonry Wall coatings - Latex extensible (Reconfirmed 2013) |
| AS 3850.2-1990 | Tilt-up concrete and precast concrete elements for use in buildings - Guide to design, casting and erection of tilt-up panels |
| AS 3660.2-2000 | Termite management In and around existing buildings and structures - Guidelines |
| AS 3727-1993 | Guide to residential pavements |
| AS 1012.20-1992 | Methods of testing concrete Determination of chloride and sulfate in hardened concrete and concrete aggregates |
| AS/NZS 4452:1997 | The storage and handling of toxic substances |
| AS 3660-1993 | Protection of buildings from subterranean termites - Prevention, detection and treatment of infestation |
| AS 2327.1-1996 | Composite structures - Simply supported beams |
| AS/NZS 1546.1:1998 | On-site domestic wastewater treatment units - Septic tanks |
| AS 1012.14-1991 | Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength |
| AS 3972-1997 | Portland and blended cements |
| HB 109-1998 | Slabs and footings for reinforced masonry houses |
| AS 2783-1992 | Use of reinforced concrete for small swimming pools |
| AS 2159 SUPP 1-1996 | Piling - Design and installation - Guidelines (Supplement to AS 2159 - 1995) (Reconfirmed 2018) |
| AS/NZS 3500.3.2:1998 | National plumbing and drainage Stormwater drainage - Acceptable solutions |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.