AS 3558.5-1999
Current
Current
The latest, up-to-date edition.
Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of degradation by ultraviolet light (Reconfirmed 2016)
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
10-05-1999
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
This Standard sets out a method for determining the resistance to degradation by ultraviolet light of plastics material used in sanitary plumbing fixtures.
| Committee |
WS/3
|
| DocumentType |
Standard
|
| ISBN |
0 7337 2981 9
|
| Pages |
3
|
| ProductNote |
Reconfirmed 28/10/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 28/10/2016
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
First published as AS 3558.5-1989.
Second edition 1999.
| AS 3558.6-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Visual examination of surface finish for defects (Reconfirmed 2016) |
| AS 3558.19-1999 | Methods of testing plastics and composite materials sanitary plumbing fixtures Determination of impact resistance of sinks (Reconfirmed 2016) |
| ATS 5200.469-2005 | Technical Specification for plumbing and drainage products Waterless or limited flush urinals - With an integral sealing device |
| AS 2845.1-1995 | Water supply - Backflow prevention devices - Materials, design and performance requirements |
| AS 3496-1999 | Metal-bodied and plastic-bodied taps |
| AS 1172.5:2019 | Sanitary plumbing products Baths for ablutionary purposes |
| AS 4796:2016 | Water supply - Metal-bodied and plastic-bodied ball valves for property service connection |
| AS/NZS 2845.1:2010 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS 5200.037.2-2008 | Plumbing and drainage products Flow controllers for use with heated or cold water systems (Reconfirmed 2016) |
| AS 3565.1-2004 | Meters for water supply Cold water meters |
| SA TS 100:2018 | Vacuum WC pans, vacuum urinals and interface valves intended for use with vacuum drainage systems and designs |
| AS 3565.1-1998 | Meters for cold potable water - Volumetric chamber and turbine meters |
| AS 4032.1-2005 | Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements |
| AS 4032.2-2005 | Water supply - Valves for the control of hot water supply temperatures Tempering valves and end-of-line temperature-actuated devices (Reconfirmed 2015) |
| AS 3565.1-2010 | Meters for cold and heated drinking and non-drinking water supplies Technical requirements (Reconfirmed 2021) |
| AS 4747.2-2013 | Meters for non-urban water supply Technical requirements for closed conduit meters fully charged |
| AS/NZS 3499:1997 | Flexible tube connectors for water supply |
| MP 52-1997 | Manual of authorization procedures for plumbing and drainage products |
| AS 1756-1999 | Household sinks |
| AS 4747.3-2013 | Meters for non-urban water supply Technical requirements for open channel meters |
| ATS 5200.501-2009 | Technical Specification for plumbing and drainage products Anti-infiltration overflow relief point |
| AS 4883:2017 | Air valves for sewerage |
| AS 3499-1995 | Authorization requirements for plumbing products - Flexible tubes |
| AS/NZS 3718:2005 | Water supply - Tap ware (Reconfirmed 2016) |
| AS/NZS 3718:2003 | Water supply - Tap ware |
| AS 1910-2004 | Water supply - Float control valves for use in hot and cold water (Reconfirmed 2016) |
| AS 4032.4:2014 | Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures |
| AS 1229-1991 | Laundry troughs |
| AS/NZS 2845.1:1998 | Water supply - Backflow prevention devices Materials, design and performance requirements |
| AS/NZS 3497:1998 | Drinking water treatment units - Plumbing requirements |
| AS 4956:2017 | Air valves for water supply |
| MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
| AS 4796-2001 | Water supply - Metal bodied and plastic bodied ball valves for property service connection |
| AS 3496-1995 | Authorization requirements for plumbing products - Metal-bodied and plastic-bodied taps |
| AS 3688-2005 | Water supply - Metallic fittings and end connectors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.