AS 2887-1993
Current
Current
The latest, up-to-date edition.
Plastic waste fittings
Available format(s)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
11-15-1993
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies requirements for moulded or fabricated plastic waste fittings for use in plumbing installations. Such fittings are suitable for receiving short-duration, intermittent liquid discharges at temperatures not exceeding 95 degrees Celsius. UPVC fittings for soil, waste and vent applications are not covered by this Standard.
| Committee |
PL-006
|
| DocumentType |
Standard
|
| ISBN |
0 7262 8484 X
|
| Pages |
23
|
| ProductNote |
Reconfirmed 27/01/2016.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 27/01/2017
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies requirements for moulded or fabricated plastic waste fittings for use in plumbing installations. Such fittings are suitable for receiving short-duration, intermittent liquid discharges at temperatures not exceeding 95¦C.NOTE: Where it is envisaged that a plastic waste fitting will be used in an environment where temperatures in excess of 95¦C are common, advice should be sought from the manufacturer. UPVC fittings for soil, waste and vent applications are not covered by this Standard (see AS 1415).
First published as part of AS A162-1969.
Revised and redesignated in part as AS 2887-1986.
Second edition 1993.
| AS 1432-1996 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS 2888.2-2002 | Methods of testing plastics waste fittings Method for determining dimensions |
| AS 2888.5-1986 | Methods of testing plastics waste fittings Trap seal test |
| AS 1415.4-1984 | Unplasticized PVC (UPVC) pipes and fittings for soil, waste and vent (SWV) applications Rubber ring expansion joints |
| AS 2888.10-1986 | Methods of testing plastics waste fittings Method for leak testing plastics pan connectors |
| AS 1444-2007 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017) |
| AS 1769-1975 | Welded stainless steel tubes for plumbing applications (Reconfirmed 2018) |
| AS 2888.9-1986 | Methods of testing plastics waste fittings Method for determining residual stress in plastics waste fittings |
| AS 2033-1980 | Installation of polyethylene pipe systems |
| AS 2888.1-2002 | Methods of testing plastics waste fittings Method of determining the suitability of connection threads of BSP form |
| AS 2888.10-2002 | Methods of testing plastics waste fittings Method for leak testing plastics pan connectors |
| AS 3500.0-1990 | National Plumbing and Drainage Code Glossary of terms |
| AS 2888.4-1986 | Methods of testing plastics waste fittings Method for air pressure/vacuum testing of plastics waste fittings |
| AS 2888.2-1993 | Methods of testing plastics waste fittings Method for determining dimensions |
| AS 1589-2001 | Copper and copper alloy waste fittings (Reconfirmed 2018) |
| AS 2888.3-2002 | Methods of testing plastics waste fittings Methods for pressure testing of plastics waste fittings |
| AS 1646-2007 | Elastomeric seals for waterworks purposes (Reconfirmed 2018) |
| AS 2888.9-2002 | Methods of testing plastics waste fittings Method for determining residual stress in plastics waste fittings |
| AS 2888.4-2002 | Method of testing plastics waste fittings Method for air pressure/vacuum testing of plastics waste fittings |
| AS/NZS 3500.0:2003 | Plumbing and drainage Glossary of terms |
| AS 2888.5-2002 | Methods of testing plastics waste fittings Trap seal test |
| AS 2888.7-2002 | Methods of testing plastics waste fittings Method for testing the seal of plastics waste outlets |
| AS 2888.3-1986 | Methods of testing plastics waste fittings Method for pressure testing of plastics waste fittings |
| AS 1074-1989 | Steel tubes and tubulars for ordinary service (Reconfirmed 2018) |
| AS 1172-1989 | Water closet pans |
| AS 2888.8-1993 | Methods of testing plastics waste fittings - Thermal cycling test |
| AS 2888.11-1993 | Methods of testing plastics waste fittings Method for cyclic testing of plastics telescopic waste connectors (rubber-ring joint type) |
| AS 1415.1-1984 | Unplasticized PVC (UPVC) pipes and fittings for soil, waste and vent (SWV) applications - Pipes |
| AS 1432-2004 | Copper tubes for plumbing, gasfitting and drainage applications |
| AS 2888.7-1986 | Methods of testing plastics waste outlets Method for testing the seal of plastics waste outlets |
| AS 1589-1994 | Copper and copper alloy waste fittings |
| AS 2888.1-1993 | Methods of testing plastics waste fittings Method of determining the suitability of connection threads of BSP form |
| AS 2888.6-1986 | Methods of testing plastics waste outlets Method for load testing of plastics waste outlets |
| AS 1415.2-1984 | Unplasticized PVC (UPVC) pipes and fittings for soil, waste and vent (SWV) applications - Moulded fittings |
| AS 1444-1996 | Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties |
| AS 2888.6-2002 | Methods of testing plastics waste fittings Method for load testing of plastics waste outlets |
| AS 2888.8-2002 | Methods of testing plastics waste fittings Thermal cycling test |
| AS 1722.2-1992 | Pipe threads of Whitworth form Fastening pipe threads (Reconfirmed 2017) |
| AS 3518.2-1988 | Acrylonitrile butadiene styrene (ABS) pipes and fittings for pressure applications - Solvent cement fittings |
| AS 2888.11-2002 | Methods of testing plastics waste fittings Method for cyclic testing of plastics telescopic waste connectors (rubber-ring joint type) |
| AS 1646-1992 | Elastomeric seals for waterworks purposes |
| ATS 5200.047-2005 | Technical Specification for plumbing and drainage products Self-sealing devices |
| AS 5200.000-2006 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products (Reconfirmed 2018) |
| AS 1172.5:2019 | Sanitary plumbing products Baths for ablutionary purposes |
| ATS 5200.040-2005 | Waste pipe connection outlets and gratings, separate or integral |
| ATS 5200.050-2005 | Technical Specification for plumbing and drainage products Prefabricated bathroom modules |
| ATS 5200.104-2005 | Appliances (miscellaneous) |
| AS/NZS 1730:1996 | Washbasins |
| AS/NZS 1260:1996 | PVC pipes and fittings for drain, waste and vent applications |
| AS 3494-1997 | Bidettes and bidets |
| AS 3982-1991 | Urinals |
| AS/NZS 1260:2009 | PVC-U pipes and fittings for drain, waste and vent application |
| AS/NZS 1260:2017 | PVC-U pipes and fittings for drain, waste and vent applications |
| MP 52-2005 | Manual of authorization procedures for plumbing and drainage products |
| AS/NZS 3879:2011 | Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings |
| AS/NZS 2023:1995 | Baths for ablutionary purposes |
| MP 52-1997 | Manual of authorization procedures for plumbing and drainage products |
| AS 1756-1999 | Household sinks |
| AS/NZS 1229:1997 | Laundry troughs and tubs |
| AS 3861-1991 | Spa baths (Reconfirmed 2016) |
| AS/NZS 1229:2002 | Laundry troughs and tubs |
| ATS 5200.101-2005 | Appliances (low hazard rating) |
| AS 5200.000-2005 | Technical specification for plumbing and drainage products Procedures for certification of plumbing and drainage products |
| AS 1172.4:2019 | Sanitary plumbing products Washbasins |
| ATS 5200.482-2006 | Technical Specification for plumbing and drainage products Soil waste dump fitting |
| AS/NZS 1254:2002 | PVC pipes and fittings for storm and surface water applications |
| DR 01195 CP | Laundry troughs and tubs |
| AS/NZS 3982:1996 | Urinals |
| ATS 5200.460-2004 | Technical Specification for plumbing and drainage products Grey water diversion valve assembly |
| AS/NZS 5065:2005 | Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017) |
| ATS 5200.012-2005 | Technical Specification for plumbing and drainage products In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic |
| AS 1229-1991 | Laundry troughs |
| MP 52-2001 | Manual of authorization procedures for plumbing and drainage products |
| AS 3588-1996 | Shower bases and shower modules (Reconfirmed 2016) |
| AS 1172.3:2019 | Sanitary plumbing products Personal hygiene fixtures and appliances - Bidets and bidettes |
| AS 1589-1994 | Copper and copper alloy waste fittings |
| AS 1589-2001 | Copper and copper alloy waste fittings (Reconfirmed 2018) |
| AS/NZS 1260:2002 | PVC-U pipes and fittings for drain, waste and vent application |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.