• There are no items in your cart

AS 2854-2004

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Tinplate cans for general use

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

06-30-2017

Language(s)

English

Published date

01-01-2004

Preview
US$72.80
Excluding Tax where applicable

Specifies structural and performance requirements for two- and three-piece tinplate cans for general use. Nominal dimensions and capacities are given for a range of stock size cans up to a maximum nominal diameter or cross-section of 230 mm.

Committee
PK-028
DocumentType
Standard
ISBN
0 7337 6256 5
Pages
25
PublisherName
Standards Australia
Status
Withdrawn
Supersedes

This Standard specifies structural and performance requirements for a range of tinplate cans for general use and having a maximum nominal diameter or cross-section of 230 mm. These cans have re-closable sealing systems, comprising friction closure cans and non-removable top cans with screw thread closures.Nominal capacities, gross lidded capacities and dimensions are specified for a range of stock size cans. Recommendations for non-stock size cans are also provided. NOTE: Additional information that may be required by the purchaser or the manufacturer is given in Appendix A.This Standard describes specifications and type-testing only. Relevant parties should decide upon acceptable quality levels (AQLs) based on AS 1199.1.

First published as AS 1524-1975 and AS 1525-1975.
Revised and redesignated as AS 2854-1986.
Second edition 2004.

AS 2582.4-2003 Complete, filled transport packages - Methods of test Vertical impact test by dropping (Reconfirmed 2020)
AS 1517-1991 Tinplate and blackplate
AS 2582.8-2003 Complete, filled transport packages - Methods of test Internal hydraulic pressure test (Reconfirmed 2020)
AS 2400.1-1995 Packaging Glossary of packaging terms (Reconfirmed 2016)
AS 2582.9-2003 Complete, filled transport packages - Methods of test Leakage test (Reconfirmed 2020)
AS 2582.3-2003 Complete, filled transport packages - Methods of test Stacking tests using a static load (Reconfirmed 2020)
AS 1199.1-2003 Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)

AS 3730.29-2006 Guide to the properties of paints for buildings Solvent-borne - Exterior/interior - Paving paint (Reconfirmed 2016)
AS 3730.21-2006 Guide to the properties of paints for buildings Primer - Solvent-borne - For ferrous metallic surfaces
AS/NZS 3750.8:1994 Paints for steel structures Vinyl paints - Primer, high-build and gloss (Reconfirmed 2013)
AS 3730.3-2006 Guide to the properties of paints for buildings Latex - Interior - Low gloss (Reconfirmed 2016)
AS/NZS 3750.9:1994 Paints for steel structures - Organic zinc-rich primer
AS 3730.2-2006 Guide to the properties of paints for buildings Latex - Interior - Semi-gloss (Reconfirmed 2016)
AS 4025.2-1993 Paints for equipment including ships Solvent-borne - Interior and exterior - Undercoat
AS 3730.9-2006 Guide to the properties of paints for buildings Latex - Exterior - Semi-gloss
AS/NZS 3750.11:2009 Paints for steel structures Chlorinated rubber - High-build and gloss
AS 3730.5-2006 Guide to the properties of paints forbuildings Solvent-borne - Interior - Semi-gloss (Reconfirmed 2016)
AS/NZS 2009:2006 Glass beads for pavement-marking materials (Reconfirmed 2016)
AS 3730.7-2006 Guide to the properties of paints for buildings Latex - Exterior - Flat
AS 3730.11-1991 Guide to the properties of paints for buildings Solvent-borne - Interior - Full gloss enamel
AS 3750.2-1994 Paints for steel structures - Ultra high-build paint
AS 1580.203.1-2004 Paints and related materials - Methods of test Skin formation
AS/NZS 1580.214.1:1997 Paints and related materials - Methods of test Consistency - Stormer viscometer (Reconfirmed 2013)
AS/NZS 3750.23:2008 Paints for steel structures Semi-gloss enamel - Solvent-borne (Reconfirmed 2021)
AS/NZS 3750.7:2009 Paints for steel structures Aluminium paint (Reconfirmed 2021)
AS 3730.15-2006 Guide to the properties of paints for buildings Primer - Latex - For metallic zinc surfaces
AS 3730.13-2006 Guide to the properties of paints for buildings Primer - Wood - Solvent-borne - Interior/exterior (Reconfirmed 2016)
AS/NZS 3750.22:2008 Paints for steel structures Full gloss enamel - Solvent-borne (Reconfirmed 2021)
AS/NZS 3750.6:2009 Paints for steel structures Full gloss polyurethane (two-pack) (Reconfirmed 2020)
AS 3730.28-2006 Guide to the properties of paints for buildings Wood stain - Solvent-borne - Exterior
AS 4025.3-1993 Paints for equipment including ships Solvent-borne - Interior and exterior - Semi-gloss enamel
AS 3730.26-1993 Guide to the properties of paints for buildings Floor varnish - Moisture cured
AS/NZS 3750.11:1996 Paints for steel structures - Chlorinated rubber - High-build and gloss
AS/NZS 3750.9:2009 Paints for steel structures Organic zinc-rich primer (Reconfirmed 2019)
AS/NZS 3750.4:1994 Paints for steel structures Bitumen paint (Reconfirmed 2013)
AS 3730.6-2006 Guide to the properties of paints for buildings Solvent-borne - Interior/exterior - Full gloss enamel (Reconfirmed 2016)
AS 3730.16-2006 Guide to the properties of paints for buildings Latex - Self-priming timber finish - Exterior
AS/NZS 3750.3:2008 Paints for steel structures Heat resisting - Exterior (Reconfirmed 2020)
AS 3730.17-2006 Guide to the properties of paints for buildings Primer - Wood - Latex - Interior/exterior (Reconfirmed 2016)
AS/NZS 3750.3:1994 Paints for steel structures - Heat resisting - Exterior
AS 3730.14-2006 Guide to the properties of paints for buildings Undercoat - Solvent-borne - Interior/exterior
AS 1580.102.1-2002 Paints and related materials - Methods of test Sampling procedure
AS 4049.3-2005 Paints and related materials - Pavement marking materials Waterborne paint - For use with surface applied glass beads (Reconfirmed 2016)
AS 4025.1-1992 Paints for equipment including ships Solvent-borne - Interior and exterior - Full gloss enamel
AS 3750.10-2008 Paints for steel structures Full gloss epoxy (two-pack) (Reconfirmed 2019)
AS 3730.18-2006 Guide to the properties of paints for buildings Undercoat/sealer - Latex - Interior/exterior
AS/NZS 3750.12:1996 Paints for steel structures Alkyd/micaceous iron oxide (Reconfirmed 2013)
AS 3730.12-2006 Guide to the properties of paints for buildings Latex - Interior - Gloss
AS/NZS 3750.1:2008 Paints for steel structures Epoxy mastic (two-pack) - For rusted steel (Reconfirmed 2020)
AS 2216-1997 Packaging for poisonous substances
AS 3730.1-2006 Guide to the properties of paints for buildings Latex - Interior - Flat (Reconfirmed 2016)
AS 3730.22-2006 Guide to the properties of paints for buildings Concrete and masonry sealer - Solvent-borne - Interior/exterior
AS 3730.22-2006 Guide to the properties of paints for buildings Concrete and masonry sealer - Solvent-borne - Interior/exterior
AS/NZS 3750.5:2008 Paints for steel structures Acrylic full gloss (two-pack) (Reconfirmed 2020)
AS/NZS 3750.7:1994 Paints for steel structures - Aluminium paint
AS 3730.27-2006 Guide to the properties of paints for buildings Clear coatings for interior timber floors
AS/NZS 3750.20:2008 Paints for steel structures Anticorrosive metal primer - Solvent-borne - Lead and chromate free (Reconfirmed 2020)
AS 3750.1-1994 Paints for steel structures - Epoxy mastic (two-pack) - For rusted steel
AS/NZS 3750.21:2008 Paints for steel structures Undercoat - Solvent-borne (Reconfirmed 2021)
AS 3730.10-2006 Guide to the properties of paints for buildings Latex - Exterior - Gloss (Reconfirmed 2016)
AS 3730.8-2006 Guide to the properties of paints for buildings Latex - Exterior - Low-gloss (Reconfirmed 2016)
AS 4049.1-2005 Paints and related materials - Pavement marking materials Solvent-borne paint - For use with surface applied glass beads (Reconfirmed 2016)
AS/NZS 3750.5:1994 Paints for steel structures - Acrylic full gloss (two-pack)
AS/NZS 3750.10:1994 Paints for steel structures Full gloss epoxy (two-pack)
AS/NZS 3750.2:2008 Paints for steel structures Ultra high-build paint (Reconfirmed 2020)
AS/NZS 3750.19:2008 Paints for steel structures Metal primer - General purpose (Reconfirmed 2020)
AS 4089-1993 Priming paint for steel - Single component - General purpose
AS 4025.4-1994 Paints for equipment including ships Solvent-borne - Lead and chromate free - Anticorrosive metal primer

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.