AS 2207-2007
Current
The latest, up-to-date edition.
Non-destructive testing - Ultrasonic testing of fusion welded joints in carbon and low alloy steel (Reconfirmed 2017)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
07-12-2007
Specifies the methods and requirements for the manual ultrasonic testing of full or partial penetration fusion welded joints in carbon and low alloy ferritic steels, 6mm or greater in thickness, using A-scan and employing four sensitivity levels.
Committee |
MT-007
|
DocumentType |
Standard
|
ISBN |
0 7337 8278 7
|
Pages |
49
|
ProductNote |
Reconfirmed 19/05/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 19/05/2017
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes |
This Standard sets out methods and requirements for the manual ultrasonic testing of full or partial penetration fusion welded joints in carbon and low alloy ferritic steels, 6 mm or greater in thickness, using A-scan presentation and employing four sensitivity levels.This Standard does not cover the testing of stainless steel.It does not cover the testing of longitudinal welds when - (a) the radius of curvature of fabrications is less than 125 mm; or(b) for tubular fabrications having an outside diameter exceeding 250 mm, the ratio of thickness to outside diameter exceeds 0.22.NOTE: Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in the purchasing guidelines set out in Appendix A.
Originated as AS B261.1-1968 and AS B260.1A-1968.
Previous edition AS 2207-1994.
Fourth edition 2007.
AS 1929-1981 | Non-destructive testing - Glossary of terms |
AS 3998-2006 | Non-destructive testing - Qualification and certification of personnel |
AS 1101.3-2005 | Graphical symbols for general engineering Welding and non-destructive examination |
AS 1171-1998 | Non-destructive testing - Magnetic particle testing of ferromagnetic products, components and structures (Reconfirmed 2022) |
AS 2083-2005 | Calibration blocks and their methods of use in ultrasonic testing |
AS 2812-2005 | Welding, brazing and cutting of metals - Glossary of terms (Reconfirmed 2018) |
AS/NZS 1554.1:2004 | Structural steel welding Welding of steel structures |
AS/NZS 2980:2018 | Qualification of welders for fusion welding of steels - Additional requirements for Australia and New Zealand |
AS/NZS 1554.4:2004 | Structural steel welding - Welding of high strength quenched and tempered steels |
AS 1796-2001 | Certification of welders and welding supervisors (Reconfirmed 2016) |
AS/NZS 1554.5:2011 | Structural steel welding Welding of steel structures subject to high levels of fatigue loading |
AS 4722-2009 | Passenger ropeways and passenger conveyors |
AS/NZS 3679.2:2016 | Structural steel Welded I sections |
AS/NZS 1554.4:2010 | Structural steel welding Welding of high strength quenched and tempered steels |
AS 2550.15-1994 | Cranes - Safe use - Concrete placing equipment |
AS 1085.20-2012 | Railway track material Welding of steel rail |
AS/NZS ISO 3834.5:2008 | Quality requirements for fusion welding of metallic materials Documents with which it is necessary to conform to claim conformity to the quality requirements of AS/NZS ISO 3834.2, AS/NZS ISO 3834.3 or AS/NZS ISO 3834.4 |
AS/NZS 2885.2:2016 | Pipelines - Gas and liquid petroleum Welding |
AS 3954:2019 | Motor vehicle driver controls - Adaptive systems for people with disabilities |
AS 3978-2003 | Non-destructive testing - Visual inspection of metal products and components (Reconfirmed 2022) |
AS 5100.8:2017 | Bridge design Rehabilitation and strengthening of existing bridges |
AS 2885.2-2007 | Pipelines - Gas and liquid petroleum Welding |
AS 4037-1999 | Pressure equipment - Examination and testing (Reconfirmed 2016) |
AS 4457.1-2007 | Earth-moving machinery - Off-the-road wheels, rims and tyres - Maintenance and repair Wheel assemblies and rim assemblies |
AS 1085.15-1995 | Railway permanent way material Aluminothermic rail welding |
AS/NZS 3350.2.5:1995 | Safety of household and similar electrical appliances Particular requirements - Dishwashers |
AS 3954.2-1991 | Motor vehicle controls - Adaptive systems for people with disabilities Hand controls - Product requirements (Reconfirmed 2014) |
AS/NZS 1554.5:2004 | Structural steel welding Welding of steel structures subject to high levels of fatigue loading |
AS/NZS 2980:2007 | Qualification of welders for fusion welding of steels |
AS/NZS 5131:2016 | Structural steelwork - Fabrication and erection |
AS 4795.2-2011 | Butterfly valves for waterworks purposes Double flanged |
AS/NZS 3679.2:1996 | Structural steel Welded I sections |
AS/NZS 3679.2:2010 | Structural steel Welded I sections |
AS/NZS 1554.1:2011 | Structural steel welding Welding of steel structures |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.