AS 2177-2006
Current
The latest, up-to-date edition.
Non-destructive testing - Radiography of welded butt joints in metal (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
04-13-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies methods and requirements for X-ray and gamma-ray radiographic testing of welded butt joints in metal products.
| Committee |
MT-007
|
| DocumentType |
Standard
|
| ISBN |
0 7337 7377 X
|
| Pages |
45
|
| ProductNote |
Reconfirmed 09/12/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 09/12/2016
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard specifies methods and requirements for X-ray and gamma-ray radiographic testing of welded butt joints in metal products. It does not cover neutron radiography and does not specify the permissible defect levels used for the acceptance/rejection criteria of welds. The individual methods of test and the permissible defect levels are specified in the relevant product or application Standard.Advice and recommendations on information to be supplied by the purchaser at the time of enquiry or order are contained in Appendix A.Guidance and general information which should assist the users of this Standard is contained in Appendix B.
Originated as AS B164-1965 Previous edition AS 2177.1-1994 Revised and redesignated as AS 2177-2006.
| AS 2243.4-1998 | Safety in laboratories - Ionizing radiations |
| AS 4749-2001 | Non-destructive testing - Terminology of and abbreviations for fusion weld imperfections as revealed by radiography |
| AS 3998-2006 | Non-destructive testing - Qualification and certification of personnel |
| AS 1929-1981 | Non-destructive testing - Glossary of terms |
| AS 3669-2006 | Non-destructive testing - Qualification and approval of personnel - Aerospace |
| AS/NZS 2980:2018 | Qualification of welders for fusion welding of steels - Additional requirements for Australia and New Zealand |
| AS 4749-2007 | Non-destructive testing - Terminology of and abbreviations for fusion weld imperfections as revealed by radiography (Reconfirmed 2017) |
| AS 2168.2-2009 | Non-destructive testing - Computerized radiography Testing of metallic materials using X-rays and gamma rays (Reconfirmed 2019) |
| AS 4722-2009 | Passenger ropeways and passenger conveyors |
| AS/NZS 3679.2:2016 | Structural steel Welded I sections |
| AS/NZS ISO 3834.5:2008 | Quality requirements for fusion welding of metallic materials Documents with which it is necessary to conform to claim conformity to the quality requirements of AS/NZS ISO 3834.2, AS/NZS ISO 3834.3 or AS/NZS ISO 3834.4 |
| AS/NZS 2885.2:2016 | Pipelines - Gas and liquid petroleum Welding |
| AS 3954:2019 | Motor vehicle driver controls - Adaptive systems for people with disabilities |
| AS 3577-2006 | Steel cylinders for compressed gases - Welded - 150 kg to 500 kg |
| AS 5100.8:2017 | Bridge design Rehabilitation and strengthening of existing bridges |
| AS 2885.2-2007 | Pipelines - Gas and liquid petroleum Welding |
| AS 2168.1-2009 | Non-destructive testing - Computerized radiography Systems (Reconfirmed 2019) |
| AS 3954.2-1991 | Motor vehicle controls - Adaptive systems for people with disabilities Hand controls - Product requirements (Reconfirmed 2014) |
| AS EN 12079.3-2010 | Offshore containers and associated lifting sets Periodic inspection, examination and testing (EN 12079-3:2006, MOD) |
| AS/NZS 2980:2007 | Qualification of welders for fusion welding of steels |
| AS/NZS 5131:2016 | Structural steelwork - Fabrication and erection |
| AS/NZS 3509:2009 | LP Gas fuel vessels for automotive use (Reconfirmed 2019) |
| AS/NZS 3679.2:1996 | Structural steel Welded I sections |
| AS/NZS 3679.2:2010 | Structural steel Welded I sections |
| AS 2314-2006 | Radiography of metals - Image quality indicators (IQI) and recommendations for their use |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.