AS 2021-2000
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Acoustics - Aircraft noise intrusion - Building siting and construction
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
07-11-2024
English
08-10-2000
Provides guidance on the siting and construction of new buildings against aircraft noise intrusion and on the acoustical adequacy of existing buildings in areas near aerodromes. The assessment of potential aircraft noise exposure at a given site is based on the Australian Noise Exposure forecast (ANEF) system. The Standard also provides guidelines for determining the type of building construction necessary to provide a given noise reduction.
Committee |
EV-011
|
DocumentType |
Standard
|
ISBN |
0 7337 3515 0
|
Pages |
61
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This Standard, together with the relevant Australian Noise Exposure Forecast (ANEF) chart or locality map available for the aerodrome under consideration, provides guidelines for determining—(a) whether the extent of aircraft noise intrusion makes building sites ‘acceptable’, ‘unacceptable’ or ‘conditionally acceptable’ for the types of activity to be, or being, undertaken (Clause 2.3);(b) for ‘conditionally acceptable’ sites, the extent of noise reduction required to provide acceptable noise levels indoors for the types of activity to be, or being, undertaken; and(c) the type of building construction necessary to provide a given noise reduction, provided that external windows and doors are closed (see Note 1).This Standard deals specifically with noise from take-off, landing and circuit training operations at civil aerodromes or military airfields.The acceptability of outdoor spaces is not covered by this Standard.NOTES: 1 The recommendations for building construction are based on the assumption that external windows and doors are shut. If external windows or doors are opened for ventilation or other purposes, the noise attenuation values for various components given in Clause 3.3 will not be achieved. Item (c) above implies that mechanical ventilation will need to be installed when external windows and doors are shut to provide adequate protection against aircraft noise intrusion. Whether or not sufficient ventilation can be achieved by mechanical or other means should be considered before the selection of building components described in Clause 3.3.2 There may be a significant increase in costs incurred in buildings designed to provide higher than normal noise attenuation for their type.
First published as AS 2021-1977.
Second edition 1985.
Third edition 1994.
Fourth edition 2000.
AS 2047-1999 | Windows in buildings - Selection and installation |
AS 3826-1998 | Strengthening existing buildings for earthquake |
AS 2659.2-1983 | Guide to the use of sound measuring equipment - Portable equipment for integration of sound signals |
AS 2107-1987 | Acoustics - Recommended design sound levels and reverberation times for building interiors |
AS/NZS 3000:2000 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
AS/NZS 1276.1:1999 | Acoustics - Rating of sound insulation in buildings and of building elements Airborne sound insulation |
AS 1259.1-1990 | Acoustics - Sound level meters Non-integrating |
AS 1259.2-1990 | Acoustics - Sound level meters Integrating - Averaging |
AS 1170.4-1993 | Minimum design loads on structures (known as the SAA Loading Code) Earthquake loads |
AS 1668.2-1991 | The use of mechanical ventilation and air-conditioning in buildings Mechanical ventilation for acceptable indoor-air quality |
AS 2659.1-1988 | Guide to the use of sound measuring equipment - Portable sound level meters |
AS 1633-1985 | Acoustics - Glossary of terms and related symbols |
AS 1170.4-2007 | Structural design actions Earthquake actions in Australia (Reconfirmed 2018) |
AS/NZS 2107:2000 | Acoustics - Recommended design sound levels and reverberation times for building interiors |
AS 3671-1989 | Acoustics - Road traffic noise intrusion - Building siting and construction |
WS11-2012 | Timber-framed Systems for External Noise |
AS/NZS 2107:2000 | Acoustics - Recommended design sound levels and reverberation times for building interiors |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.