• Shopping Cart
    There are no items in your cart

AS 1657:2018

Current

Current

The latest, up-to-date edition.

Fixed platforms, walkways, stairways and ladders - Design, construction and installation

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

04-18-2018

Preview
US$151.96
Excluding Tax where applicable

AS 1657 2018 sets out requirements for the design, selection, construction and installation of fixed platforms, walkways, stairways and ladders that are intended to provide safe access to places used by operating, inspection, maintenance and servicing personnel. KEYWORDS: Stairs

Committee
SF-013
DocumentType
Standard
ISBN
978-1-76072-042-1
Pages
95
PublisherName
Standards Australia
Status
Current
Supersedes

This Standard sets out requirements for the design, selection, construction and installation of fixed platforms, walkways, stairways and ladders that are intended to provide safe access to places used by operating, inspection, maintenance and servicing personnel.This Standard also applies to the following:(a) Movable platforms that are permanently configured but that may be site adjustable or site assembled/modified.(b) Permanently installed roof access, where such access is for the purpose of installing, operating, inspecting, maintaining or servicing equipment that is located on, or is accessible from, the roof.(c) Permanently installed access for inspection and maintenance of the roof itself.NOTES: 1 In the absence of a directly applicable Standard, this Standard may be used for guidance in providing access to some parts of stationery and mobile machinery, light and telecommunication towers, wind turbine towers and water and sewerage facilities. While such access may not be capable of conforming to all the requirements of this Standard, the principles and imposed actions should be followed.2 Appendix A provides information on recommended component dimensions and materials for edge protection.3 Appendix F provides a method for testing the load-carrying capacity of a twin-stile or single-stile fixed ladder.4 Appendix G provides information on selection of stairways, walkways and fixed ladders.5 Appendix H provides guidelines for fall protection measures for various types of ladders.6 Appendix I provides design, fabrication and installation considerations for ladders to improve their safety and reduce the likelihood of injury to users.7 Appendix J provides guidelines for roof access for the purposes of routine equipment or building maintenance activities.

First published as CA10-1938.
Fourth edition 1971.
Revised and redesignated AS 1657-1974.
Fifth edition 2018.

AS 1789-2003 Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017)
AS/NZS 1891.4:2009 Industrial fall-arrest systems and devices Selection, use and maintenance
AS 3566.2-2002 Self-drilling screws for the building and construction industries - Corrosion resistance requirements
AS/NZS 1170.2:2011 Structural design actions Wind actions (Reconfirmed 2016)
AS 4663-2013 Slip resistance measurement of existing pedestrian surfaces
AS/NZS 4600:2005 Cold-formed steel structures
AS/NZS 4791:2006 Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017)
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS/NZS 1891.2:2001 Industrial fall-arrest systems and devices Horizontal lifeline and rail systems
AS 3600-2009 Concrete structures
AS 4312-2008 Atmospheric corrosivity zones in Australia
AS/NZS 3661.2:1994 Slip resistance of pedestrian surfaces Guide to the reduction of slip hazards
AS/NZS 4792:2006 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017)
AS 4100-1998 Steel structures (Reconfirmed 2016)
AS/NZS 2312.2:2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings Hot dip galvanizing
AS/NZS 1170.1:2002 Structural design actions Permanent, imposed and other actions
AS 1720.1-2010 Timber structures Design methods
AS/NZS 1554.1:2014 Structural steel welding Welding of steel structures
AS/NZS 1665:2004 Welding of aluminium structures (Reconfirmed 2016)
AS/NZS 1170.0:2002 Structural design actions General principles
HB 197:1999 An introductory guide to the slip resistance of pedestrian surface materials
AS/NZS 1664.2:1997 Aluminium structures Allowable stress design (Reconfirmed 2020)
AS/NZS 1604.3:2012 Specification for preservative treatment Plywood
AS 4586-2013 Slip resistance classification of new pedestrian surface materials
AS/NZS 1891.1:2007 Industrial fall-arrest systems and devices Harnesses and ancillary equipment
AS 1604.1-2012 Specification for preservative treatment Sawn and round timber
AS 2312.1:2014 Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings Paint coatings
AS 1111.1:2015 ISO metric hexagon bolts and screws - Product grade C Bolts
AS/NZS 1252.2:2016 High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers Verification testing for bolt assemblies
AS 1192-2004 Electroplated coatings - Nickel and chromium (Reconfirmed 2017)
AS/NZS 1252.1:2016 High-strength steel fastener assemblies for structural engineering - Bolts, nuts and washers Technical requirements
AS/NZS 1891.3:1997 Industrial fall-arrest systems and devices - Fall-arrest devices
AS 3990-1993 Mechanical equipment - Steelwork (Reconfirmed 2016)
AS/NZS 1554.6:2012 Structural steel welding Welding stainless steels for structural purposes

AS 2304:2019 Water storage tanks for fire protection systems
AS 2593:2021 Boilers - Safety management and supervision systems
AS 2809.1:2020 Road tank vehicles for dangerous goods General requirements for all road tank vehicles
AS 4431:2019 Safe working on new lift installations in new constructions

You may also need to learn about industrial fall-arrest systems and devices

AS/NZS 1891.4:2009 specifies requirements and sets out recommendations for the selection, safe use and maintenance of industrial fall-arrest systems and devices based on the use of safety harnesses, horizontal life lines and rails, fall-arrest devices, and associated lanyards, connectors, anchorages and fittings.

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.