AS 1627.0-1997
Current
The latest, up-to-date edition.
Metal finishing - Preparation and pretreatment of surfaces Method selection guide (Reconfirmed 2017)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
12-05-1997
Gives guidance for the selection and application of the other parts of AS1627, which cover methods for the preparation and pretreatment of metal surfaces prior to the application of a protective coating.
Committee |
MT/9
|
DocumentType |
Standard
|
ISBN |
0 7337 1464 1
|
Pages |
11
|
ProductNote |
Reconfirmed 07/04/2017.This standard has been reconfirmed in Australia in 2017 and remains current in New Zealand. Reconfirmation Notice 07/04/2017
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes | |
UnderRevision |
This Standard gives guidance on the selection of the appropriate methods for the preparation and pretreatment of metal surfaces prior to the application of a protective coating. The methods and the related Australian Standards are as follows:(a) Solvent and alkaline cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . AS 1627.1(b) Power tool cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AS 1627.2(c) Flame descaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AS 1627.3(d) Abrasive blast cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AS 1627.4(e) Pickling and descaling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AS 1627.5(f) Chemical conversion treatmen . . . . . . . . . . . . . . . . . . . . . . . . . . . . AS 1627.6 (g) Hand tool cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AS 1627.7 (h) Treatment with acid solutions (non-immersion) . . . . . . . . . . . . AS 1627.10The Standard also makes reference to AS 1627.9, which gives pictorial guidance on surface finishes of steel after various treatments. The AS 1627 series of Standards apply primarily to surfaces intended to be painted, powder coated, metal sprayed or hot dipped in molten metal. For requirements for surface preparation prior to the application of electroplated coatings refer to ASTM B 183, ASTM B 242, ASTM B 252, ASTM B 253 and ASTM B 254.NOTE: Before any of these surface preparation methods are applied to a metal surface, it is important that, where necessary, prior dressing be carried out to remove any gross defects present on the surface (see Clause 3.2).
Originated as AS 1627.0-1977.
Second edition 1997.
AS 1627.9-1989 | Metal finishing - Preparation and pretreatment of surfaces - Pictorial surface preparation standards for painting steel surfaces |
AS 1627.4-1989 | Metal finishing - Preparation and pretreatment of sufaces - Abrasive blast cleaning |
AS 1627.1-1989 | Metal finishing - Preparation and pretreatment of surfaces - Cleaning using liquid solvents and alkaline solutions |
AS 1627.3-1988 | Metal finishing - Preparation and pretreatment of surfaces - Flame descaling |
AS 1627.5-1994 | Metal finishing - Preparation and pretreatment of surfaces - Pickling, descaling and oxide removal |
AS 1627.5-2003 | Metal finishing - Preparation and pretreatment of surfaces Pickling (Reconfirmed 2017) |
AS 1627.2-2002 | Metal finishing - Preparation and pretreatment of surfaces Power tool cleaning (Reconfirmed 2017) |
AS 1627.9-2002 | Metal finishing - Preparation and pretreatment of surfaces Pictorial surface preparation standards for painting steel surfaces (Reconfirmed 2017) |
AS 1627.6-2003 | Metal finishing - Preparation and pretreatment of surfaces Chemical conversion treatment of metals (Reconfirmed 2017) |
AS 1627.6-1994 | Metal finishing - Preparation and pretreatment of surfaces - Chemical conversion treatment of metals |
AS 1627.1-2003 | Metal finishing - Preparation and pretreatment of surfaces Removal of oil, grease and related contamination (Reconfirmed 2017) |
AS 1627.7-1988 | Metal finishing - Preparation and pretreatment of surfaces - Hand tool cleaning of metal surfaces |
AS 3894.1-2002 | Site testing of protective coatings Non-conductive coatings - Continuity testing - High voltage (brush) method (Reconfirmed 2013) |
AS 1627.10-1980 | Metal finishing - Preparation and pretreatment of metal surfaces prior to protective coating - Cleaning and preparation of metal surfaces using acid solutions (non-immersion) |
AS/NZS 2312:1994 | Guide to the protection of iron and steel against exterior atmospheric corrosion |
AS 1627.2-1989 | Metal finishing - Preparation and pretreatment of surfaces - Power tool cleaning |
AS 3894.1-1991 | Site testing of protective coatings Non-conductive coatings - Continuity testing - High voltage (brush) method |
AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
AS/NZS 2310:2002 | Glossary of paint and painting terms (Reconfirmed 2016) |
AS 3585-2008 | End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019) |
AS 3777-1990 | Shank hooks and large-eye hooks - Maximum 25 t |
AS 1138-1992 | Thimbles for wire rope |
AS 2089-1993 | Sheave blocks for lifting purposes |
AS 2400.5-2005 | Packaging Temporary corrosion protection (Reconfirmed 2016) |
AS 3775.1-2004 | Chain slings - Grade T Product specification |
AS 4506-2005 | Metal finishing - Thermoset powder coatings (Reconfirmed 2017) |
AS 5081-2008 | Hydraulically operated automatic control valves for waterworks purposes (Reconfirmed 2016) |
AS 4956-2008 | Air valves for water supply |
AS 4795.1-2011 | Butterfly valves for waterworks purposes Wafer and lugged (Reconfirmed 2022) |
AS 4883-2008 | Air valves for sewerage |
AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
AS 2089-2008 | Sheave blocks for lifting purposes (Reconfirmed 2019) |
AS 4883:2017 | Air valves for sewerage |
AS 4795-2006 | Butterfly valves for waterworks purposes |
AS 3777-2008 | Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019) |
AS 1789-2003 | Electroplated zinc (electrogalvanized) coatings on ferrous articles (batch process) (Reconfirmed 2017) |
AS 2318-2006 | Swivels for lifting applications (Reconfirmed 2022) |
AS 4956:2017 | Air valves for water supply |
AS 1138-2008 | Thimbles for wire rope (Reconfirmed 2019) |
AS 3864-1997 | Medical refrigeration equipment - For the storage of blood and blood products |
AS 3585-1990 | End fittings for flat-webbing slings |
AS/NZS 2312:1994 | Guide to the protection of iron and steel against exterior atmospheric corrosion |
AS 2311-1992 | The painting of buildings |
AS 4795.2-2011 | Butterfly valves for waterworks purposes Double flanged |
AS 3864.1-2012 | Medical refrigeration equipment - For the storage of blood and blood products Manufacturing requirements |
AS 1627.4-2005 | Metal finishing - Preparation and pretreatment of surfaces Abrasive blast cleaning of steel (Reconfirmed 2017) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.