AS 1580.408.2-2004
Current
The latest, up-to-date edition.
Paints and related materials - Methods of test Adhesion - Knife test (Reconfirmed 2019)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
11-26-2004
Important note : All end users must be registered with an Account prior to user licenses being assigned.This Standard method sets out two procedures for assessing qualitatively the adhesion of a coating or coating system of any thickness, to a metal substrate by cutting through the coating in a prescribed manner. This method may be used on other substrates but has limitations on soft friable substrates.
| Committee |
CH-003
|
| DocumentType |
Standard
|
| ISBN |
0 7337 6384 7
|
| Pages |
3
|
| ProductNote |
Reconfirmed 01/11/2019.
This standard has been reconfirmed in Australia in 2019 and remains current in New Zealand. Reconfirmation Notice 01/11/2019 |
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard method sets out two procedures for assessing qualitatively the adhesion of a coating or coating system of any thickness, to a metal substrate by cutting through the coating in a prescribed manner. This method may be used on other substrates but has limitations on soft friable substrates.The method may be used to compare the adhesion of paint films or to assess the change in adhesion of a coating after exposure, e.g., to natural weathering.With appropriate modifications and by waiving the restraints of preconditioning and test conditions, the test is readily applicable to field use.
Originated as AS 1580.408.2-1973.
Previous edition 1993.
Fourth edition 2004.
| AS 1580.408.4-2004 | Paints and related materials - Methods of test Adhesion (crosscut) (Reconfirmed 2019) |
| AS 1580.107.3-1992 | Paints and related materials - Methods of test Determination of wet film thickness by wheel gauge |
| AS/NZS 1580.107.3:1997 | Paints and related materials - Methods of test Determination of wet film thickness by gauge (Reconfirmed 2013) |
| AS 1580.101.5-1986 | Paints and related materials - Methods of test Conditions of test, temperature and humidity controlled |
| AS 1580.108.2-2004 | Paints and related materials - Methods of test Dry film thickness - Paint inspection gauge (Reconfirmed 2019) |
| AS 1580.108.1-1980 | Paints and related materials - Methods of test Determination of dry film thickness on iron and steel substrates (permanent magnet instruments) |
| AS/NZS 1580.108.1:1994 | Paints and related materials - Methods of test Determination of dry film thickness on metallic substrates - Non-destructive methods (Reconfirmed 2013) |
| AS 3894.3-2002 | Site testing of protective coatings Determination of dry film thickness (Reconfirmed 2013) |
| AS/NZS 1580.101.5:1999 | Paints and related materials - Methods of test Conditions of test - Temperature and humidity control (Reconfirmed 2013) |
| AS 1580.481.5-2004 | |
| AS 4848.1-2006 | Application specifications for coating systems Single coat inorganic (ethyl) zinc silicate - Solvent-borne |
| AS/NZS 3750.8:1994 | Paints for steel structures Vinyl paints - Primer, high-build and gloss (Reconfirmed 2013) |
| AS/NZS 2311:2009 | Guide to the painting of buildings |
| AS/NZS 3750.11:2009 | Paints for steel structures Chlorinated rubber - High-build and gloss |
| AS/NZS 1580.405.1:1996 | Paints and related materials - Methods of test Determination of pencil hardness of paint film (Reconfirmed 2013) |
| AS/NZS 1580.404.1:1997 | Paints and related materials - Methods of test Recoating properties (Reconfirmed 2013) |
| AS/NZS 3750.6:2009 | Paints for steel structures Full gloss polyurethane (two-pack) (Reconfirmed 2020) |
| AS/NZS 3750.11:1996 | Paints for steel structures - Chlorinated rubber - High-build and gloss |
| AS/NZS 3750.3:2008 | Paints for steel structures Heat resisting - Exterior (Reconfirmed 2020) |
| AS/NZS 2312:2002 | Guide to the protection of structural steel against atmospheric corrosion by the use of protective coatings |
| AS/NZS 3750.3:1994 | Paints for steel structures - Heat resisting - Exterior |
| AS/NZS 4158:2003 | Thermal-bonded polymeric coatings on valves and fittings for water industry purposes (Reconfirmed 2015) |
| AS 3750.10-2008 | Paints for steel structures Full gloss epoxy (two-pack) (Reconfirmed 2019) |
| AS/NZS 3750.12:1996 | Paints for steel structures Alkyd/micaceous iron oxide (Reconfirmed 2013) |
| AS/NZS 3750.1:2008 | Paints for steel structures Epoxy mastic (two-pack) - For rusted steel (Reconfirmed 2020) |
| AS/NZS 3750.5:2008 | Paints for steel structures Acrylic full gloss (two-pack) (Reconfirmed 2020) |
| AS 4361.1-1995 | Guide to lead paint management - Industrial applications |
| AS 3750.1-1994 | Paints for steel structures - Epoxy mastic (two-pack) - For rusted steel |
| AS/NZS 3750.5:1994 | Paints for steel structures - Acrylic full gloss (two-pack) |
| AS/NZS 3750.10:1994 | Paints for steel structures Full gloss epoxy (two-pack) |
| AS/NZS 2311:2017 | Guide to the Painting of Buildings |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.