AS 1418.3-1997
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Cranes, hoists and winches Bridge, gantry, portal (including container cranes) and jib cranes (Reconfirmed 2016)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
08-23-2024
12-05-1997
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Specifies the requirements for bridge, gantry, semi-gantry and portal cranes as defined in AS2549, and for container and heavy duty cranes. Sections are included on classification and load rating, structure, stability, mechanisms, access from fixed platforms, access from mobile platforms, clearances, electrical access isolators, speed limitations for pendant - controlled cranes, marking and data, inspection and commissioning, and guarding. Appendices give further requirements for access and clearance, and the use of ladders, and give guidance on information to be supplied with enquiry, order or tender and typical hazards.
| Committee |
ME-005
|
| DocumentType |
Standard
|
| ISBN |
0 7337 1527 3
|
| Pages |
40
|
| ProductNote |
Reconfirmed 18/11/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 18/11/2016
|
| PublisherName |
Standards Australia
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
This Standard sets out requirements for bridge, gantry, semi-gantry, and portal cranes defined in AS 2549. It also covers container and heavy-duty cranes. It is complementary to AS 1418.1, but the requirements given herein take precedence over corresponding requirements in that Standard.NOTES:1 Guidance on information to be supplied with enquiry, order, or tender is given in Appendix A.2 Additional requirement for heavy duty cranes are given in AS 1418.14.
Originated as part of AS CB2-1938.
Previous edition AS 1418.3-1990.
Fifth edition 1997.
Reissued incorporating Amendment No. 1 (September 1998).
Reissued incorporating Amendment No. 2 (June 2002).
| AS 1576-1974 | Code of practice for metal scaffolding (known as the SAA Metal Scaffolding Code) |
| AS 2321-2006 | Short-link chain for lifting purposes |
| AS 1418.10-1996 | Cranes (including hoists and winches) - Elevating work platforms |
| AS 1892.2-1992 | Portable ladders Timber (Reconfirmed 2022) |
| AS 1418.14-1996 | Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions |
| AS/NZS 1891.1:1995 | Industrial fall-arrest systems and devices Safety belts and harnesses |
| AS 2550.1-2002 | Cranes, hoists and winches - Safe use General requirements |
| AS 2670-1983 | Vibration and shock - Guide to the evaluation of human exposure to whole body vibration |
| AS 1418.1-2002 | Cranes, hoists and winches General requirements |
| AS 1657-1992 | Fixed platforms, walkways, stairways and ladders - Design, construction and installation |
| AS 1000-1979 | The International System of Units (SI) and its application |
| AS 4024.1-1996 | Safeguarding of machinery General principles |
| AS 1318-1985 | Use of colour for the marking of physical hazards and the identification of certain equipment in industry (known as the SAA Industrial Safety Colour Code) |
| AS/NZS 1891.1:2007 | Industrial fall-arrest systems and devices Harnesses and ancillary equipment |
| AS 2550.1-1993 | Cranes - Safe use General requirements |
| AS 2549-1996 | Cranes (including hoists and winches) - Glossary of terms |
| AS 3990-1993 | Mechanical equipment - Steelwork (Reconfirmed 2016) |
| AS 1418.1-1994 | Cranes (including hoists and winches) General requirements |
| AS/NZS 3711.3:1993 | Freight containers Corner fittings |
| AS 2321-1979 | Short-link chain for lifting purposes (non-calibrated) |
| AS 2550.1-2011 | Cranes, hoists and winches - Safe use General requirements |
| AS 1418.18-2001 | Cranes, hoists and winches Crane runways and monorails |
| AS/NZS 1170.1:2002 | Structural design actions Permanent, imposed and other actions |
| AS 1418.14-1996 | Cranes (including hoists and winches) Requirements for cranes subject to arduous working conditions |
| AS 1418.1-2002 | Cranes, hoists and winches General requirements |
| AS/NZS 1891.4:2009 | Industrial fall-arrest systems and devices Selection, use and maintenance |
| SA RUL CR.1-2013 | Rulings to cranes, hoists and winches Standards, Ruling 1: Load testing (commissioning tests) of bridge, gantry, portal (including container cranes) and jib cranes (Ruling to AS 1418.3-1997) (Reconfirmed 2016) |
| AS 1418.8-2008 | Cranes, hoists and winches Special purpose appliances (Reconfirmed 2018) |
| AS 4100-1998 | Steel structures (Reconfirmed 2016) |
| AS 5804.1-2010 | High-voltage live working General |
| AS/NZS 3000:2007 | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS 4991-2004 | Lifting devices |
| AS 2550.3-2002 | Cranes, hoists and winches - Safe use Bridge, gantry, portal (including container cranes) and jib cranes |
| AS/NZS 1170.0:2002 | Structural design actions General principles |
| AS/NZS 3000:2018 (Unamended Hardcopy + Amendments) | Electrical installations (known as the Australian/New Zealand Wiring Rules) |
| AS 1418.6-2004 | Cranes, hoists and winches Guided storing and retrieving appliances (Reconfirmed 2018) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.