• There are no items in your cart

AS 1199.1-2003

Current

Current

The latest, up-to-date edition.

Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

07-28-2003

Preview
US$187.21
Excluding Tax where applicable

Specifies an acceptance sampling system for inspection by attributes. It is indexed in terms of the acceptance quality limit (AQL). This Standard is identical with and reproduced from ISO2859-1:1999.

Committee
QR-008
DocumentType
Standard
ISBN
0 7337 5391 4
Pages
87
ProductNote
Reconfirmed 22/07/2016.This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 22/07/2016
PublisherName
Standards Australia
Status
Current
Supersedes

1.1 This part of ISO 2859 specifies an acceptance sampling system for inspection by attributes. It is indexed in terms of the acceptance quality limit (AQL).Its purpose is to induce a supplier through the economic and psychological pressure of lot non-acceptance to maintain a process average at least as good as the specified acceptance quality limit, while at the same time providing an upperlimit for the risk to the consumer of accepting the occasional poor lot.Sampling schemes designated in this part of ISO 2859 are applicable, but not limited, to inspection of- end items,- components and raw materials,- operations,- materials in process,- supplies in storage,- maintenance operations,- data or records, and- administrative procedures.1.2 These schemes are intended primarily to be used for a continuing series of lots, that is, a series long enough to allow the switching rules (9.3) to be applied. These rules provide:a) a protection to the consumer (by means of a switch to tightened inspection or discontinuation of sampling inspection) should a deterioration in quality be detected;b) an incentive (at the discretion of the responsible authority) to reduce inspection costs (by means of a switch to reduced inspection) should consistently good quality be achieved.Sampling plans in this part of ISO 2859 may also be used for the inspection of lots in isolation but, in this case the user is strongly advised to consult the operating characteristic curves to find a plan that will yield the desired protection (see 12.6). In that case, the user is also referred to the sampling plans indexed by limiting quality (LQ) given in ISO 2859-2.

Standards Relationship
ISO 2859-1:1999 Identical

Originated as AS 1199-1972.
Previous edition AS 1199-1988.
Revised and redesignated as AS 1199.1-2003.

AS 4647-2011 Diaphragm gas meters
AS 2944.2-2007 Plastics pipes and fittings for gas reticulation Polyamide fittings (Reconfirmed 2023)
AS 1442-2007 Carbon steels and carbon-manganese steels - Hot rolled bars and semifinished products (Reconfirmed 2017)
AS 1604.1-2005 Specification for preservative treatment Sawn and round timber
AS 4145.2-2008 Locksets and hardware for doors and windows Mechanical locksets for doors and windows in buildings
AS 1085.14-2012 Railway track material Prestressed concrete sleepers
AS 1599-2006 Pressure-sensitive and water activated adhesive tape for packaging and office applications
AS 3571.2-2009 Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure water supply (ISO 10639:2004, MOD)
AS 3585-2008 End fittings for synthetic flat-webbing and round slings (Reconfirmed 2019)
AS/NZS 1477:2017 PVC pipes and fittings for pressure applications
AS 3565.4-2007 Meters for cold and heated drinking and non-drinking water supplies In-service compliance testing (Reconfirmed 2019)
AS/NZS 1254:2010 PVC-U pipes and fittings for stormwater and surface water applications (Reconfirmed 2024)
AS/NZS 1576.2:2016 Scaffolding Couplers and accessories
AS/NZS 2080:2006 Safety glazing for land vehicles
AS 5100.5-2004 Bridge design Concrete
AS/NZS 1577:2013 Scaffold decking components
AS/NZS 2492:2007 Cross-linked polyethylene (PE-X) pipes for pressure applications
AS/NZS 4455.1:2008 Masonry units, pavers, flags and segmental retaining wall units Masonry units (Reconfirmed 2020)
AS 1357.1-2004 Valves primarily for use in heated water systems Protection valves
AS 1901-2004 Electroplated coatings - Gold and gold alloys
AS 2309-2008 Durability of galvanized and electrogalvanized zinc coatings for the protection of steel in structural applications - Atmospheric
AS ISO 10017-2006 Guidance on statistical techniques for ISO 9001:2000 (ISO/TR 10017, Ed. 2.0 (2003) MOD)
AS 4049.4-2006 Paints and related materials - Pavement marking materials High performance pavement marking systems
AS/NZS 3518:2013 Acrylonitrile butadine styrene (ABS) compounds, pipes and fittings for pressure applications (Reconfirmed 2024)
AS 1646.4-2005 Elastomeric seals for waterworks purposes Material requirements for pipe joint seals used in water and wastewater applications - Thermoplastic elastomers and vulcanizates
AS/NZS 1163:2016 Cold-formed structural steel hollow sections
AS 2321-2006 Short-link chain for lifting purposes
AS 2703-2008 Vehicle loop detector sensors
AS 1406-2004 Electroplated coatings - Nickel and chromium on plastics for decorative applications (Reconfirmed 2017)
AS 4797-2009 Stainless steel chain for lifting purposes (Reconfirmed 2019)
AS 5039-2008 Security screen doors and security window grilles
AS 5074-2009 Natural latex rubber condoms - Requirements and test methods
AS 1597.2-2013 Precast reinforced concrete box culverts Large culverts (exceeding 1200 mm span or 1200 mm height and up to and including 4200 mm span and 4200 mm height)
AS 681.3-2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Cellular materials of vulcanized rubber
AS/NZS 2009:2006 Glass beads for pavement-marking materials (Reconfirmed 2016)
AS 4125.1-2009 Sound laboratory practice in food and water microbiology laboratories - Premises, safety, sample management, regulatory compliance and record management
AS 1085.20-2006 Railway track material - Part 20: Welding of steel rail
AS/NZS 4677:2010 Steel utility services poles
AS 2439.1-2007 Perforated plastics drainage and effluent pipe and fittings Perforated drainage pipe and associated fittings
AS 6669:2016 Plywood - Formwork
AS 1447-2007 Hot-rolled spring steels (Reconfirmed 2017)
AS 4032.1-2005 Water supply - Valves for the control of heated water supply temperatures Thermostatic mixing valves - Materials design and performance requirements
AS 2001.2.25.4-2006 Methods of test for textiles Physical tests - Determination of the abrasion resistance of fabrics by the Martindale method - Assessment of appearance change
AS 2080:2019 Safety glazing for land vehicles
AS 4176.8-2010 Multilayer pipes for pressure applications Multilayer pipe systems for consumer gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Specifications for systems (ISO 17484-1:2006, MOD)
AS 4672.1:2007 Steel prestressing materials General requirements
AS 4181-2013 Repair and off-take clamps for water industry purposes (Reconfirmed 2023)
AS/NZS 1605.1:2018 Methods for sampling and analysing timber preservatives and preservative-treated timber General requirements, sampling, and determination of sapwood and heartwood presence
AS 4256.1-2006 Plastic roof and wall cladding materials General requirements (Reconfirmed 2018)
AS/NZS 3750.7:2009 Paints for steel structures Aluminium paint (Reconfirmed 2021)
AS/NZS 4999:2006 PVC-U maintenance shafts
AS/NZS 1576.2:2009 Scaffolding Couplers and accessories
AS/NZS 3879:2006 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS pipes and fittings
AS/NZS 4998:2009 Bolted unrestrained mechanical couplings for waterworks purposes (Reconfirmed 2022)
AS 1085.20-2012 Railway track material Welding of steel rail
AS 3775.1-2004 Chain slings - Grade T Product specification
AS/NZS 4765:2007 Modified PVC (PVC-M) pipes for pressure applications
AS/NZS 2728:2013 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
AS 5082.2-2007 Polybutylene (PB) plumbing pipe systems - Metric series Mechanical and fusion jointing systems (Reconfirmed 2017)
AS/NZS 1260:2009 PVC-U pipes and fittings for drain, waste and vent application
AS/NZS 1260:2017 PVC-U pipes and fittings for drain, waste and vent applications
AS 681.1-2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Vulcanized rubber
AS/NZS 4065:2010 Concrete utility services poles
AS/NZS 3879:2011 Solvent cements and priming fluids for PVC (PVC-U and PVC-M) and ABS and ASA pipes and fittings
AS 1418.10(INT)-2004 Cranes, hoists and winches Elevating work platforms
AS 4506-2005 Metal finishing - Thermoset powder coatings (Reconfirmed 2017)
AS/NZS 1477:2006 PVC pipes and fittings for pressure applications
AS 1379-2007 Specification and supply of concrete (Reconfirmed 2017)
AS/NZS 2642.1:2007 Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe extrusion compounds (Reconfirmed 2024)
AS 3743-2003 Potting mixes
AS 2001.2.25.3-2006 Methods of test for textiles Physical tests - Determination of the abrasion resistance of fabrics by the Martindale method - Determination of mass loss
AS/NZS 4791:2006 Hot-dip galvanized (zinc) coatings on ferrous open sections, applied by an in-line process (Reconfirmed 2017)
AS/NZS 4793:2009 Mechanical tapping bands for waterworks purposes
AS/NZS 3518:2004 Acrylonitrile butadiene styrene (ABS) compounds, pipes and fittings for pressure applications
AS 2439.2-2007 Perforated plastics drainage and effluent pipe and fittings Perforated effluent pipe and associated fittings for sewerage applications
AS 5081-2008 Hydraulically operated automatic control valves for waterworks purposes (Reconfirmed 2016)
AS 1397-2011 Continuous hot-dip metallic coated steel sheet and strip - Coatings of zinc and zinc alloyed with aluminium and magnesium
AS/NZS 4067:2004 Firefighters' helmets
AS 1443-2004 Carbon and carbon-manganese steel - Cold finished bars (Reconfirmed 2022)
AS/NZS 2210.5:2009 Occupational protective footwear Specification for occupational footwear (ISO 20347:2004, MOD)
AS 4956-2008 Air valves for water supply
AS 4176.2-2010 Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Pipes (ISO 21003-2:2008, MOD) (Reconfirmed 2022)
AS/NZS 4455.2:2010 Masonry units, pavers, flags and segmental retaining wall units Pavers and flags (Reconfirmed 2020)
AS/NZS 3679.1:2016 Structural steel Hot-rolled bars and sections
AS 1638-2008 Motor vehicles - Light alloy road wheels
AS 4256.2-2006 Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) building sheets (Reconfirmed 2018)
AS 2854-2004 Tinplate cans for general use
AS 4883-2008 Air valves for sewerage
AS 2943-2007 Plastics pipes and fittings for gas reticulation - Polyamide compounds (Reconfirmed 2022)
AS 2905-2005 Steel drums
AS 4606-2012 Grade S fire resistant and antistatic requirements for conveyor belting and conveyor accessories (Reconfirmed 2024)
AS 4049.2-2005 Paints and related materials - Pavement marking materials Thermoplastic pavement marking materials - For use with surface applied glass beads
AS ISO 8009-2009 Mechanical contraceptives - Reusable natural and silicone rubber contraceptive diaphragms - Requirements and tests
AS 1444-2007 Wrought alloy steels - Standard, hardenability (H) series and hardened and tempered to designated mechanical properties (Reconfirmed 2017)
AS 681.2-2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Thermoplastic elastomers
AS 4176.7-2010 Multilayer pipes for pressure applications Multilayer piping systems for hot and cold water plumbing applications - Assessment of conformity (ISO/TS 21003-7:2008, MOD)
AS 4883:2017 Air valves for sewerage
AS/NZS 4357.0:2005 Structural laminated veneer lumber Specifications (Reconfirmed 2016)
AS 1856-2004 Electroplated coatings - Silver
AS 4256.4-2006 Plastic roof and wall cladding materials Unplasticized polyvinyl chloride (uPVC) wall cladding boards (Reconfirmed 2018)
AS/NZS 3718:2005 Water supply - Tap ware (Reconfirmed 2016)
AS 4049.3-2005 Paints and related materials - Pavement marking materials Waterborne paint - For use with surface applied glass beads (Reconfirmed 2016)
AS 3600:2018 Concrete structures
AS 681.4-2008 Elastomeric seals - Material requirements for pipe joint seals used in water and drainage applications Cast polyurethane sealing elements
AS/NZS 4944:2006 Gas meters - In-service compliance testing (Reconfirmed 2017)
AS 4397-2007 Electroplated coatings of zinc on steel fasteners with imperial threads
AS 1192-2004 Electroplated coatings - Nickel and chromium (Reconfirmed 2017)
AS/NZS 2041.4:2010 Buried corrugated metal structures Helically formed sinusoidal pipes
AS 6669-2007 Plywood - Formwork
AS 1450-2007 Steel tubes for mechanical purposes (Reconfirmed 2017)
AS 2429-2004 Electroplated coatings of rhodium for general engineering applications
AS/NZS 2210.3:2009 Occupational protective footwear Specification for safety footwear (ISO 20345:2004, MOD)
AS 4454-2003 Composts, soil conditioners and mulches
AS/NZS 2728:2007 Prefinished/prepainted sheet metal products for interior/exterior building applications - Performance requirements
AS 1154.1-2004 Insulator and conductor fittings for overhead power lines - Performance, material, general requirements and dimensions
AS 5082.1-2007 Polybutylene (PB) plumbing pipe systems - Metric series Metric polybutylene (PB) pipes for hot and cold water applications (Reconfirmed 2017)
AS 5100.5:2017 Bridge design Concrete
AS/NZS 5065:2005 Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications (Reconfirmed 2017)
AS 3777-2008 Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019)
AS 4032.4:2014 Water supply - Valves for the control of heated water supply temperatures Thermostatically controlled taps for the control of heated water supply temperatures
AS 3680-2008 Polyethylene sleeving for ductile iron piping (Reconfirmed 2021)
AS/NZS 4680:2006 Hot-dip galvanized (zinc) coatings on fabricated ferrous articles (Reconfirmed 2017)
AS/NZS 4765:2017 Modified PVC (PVC-M) pipes for pressure applications
AS 2770-2005 Measuring cylinders - Plastics - Graduated
AS/NZS 2269:2004 Plywood - Structural
AS/NZS 4792:2006 Hot-dip galvanized (zinc) coatings on ferrous hollow sections, applied by a continuous or a specialized process (Reconfirmed 2017)
AS 3600-2009 Concrete structures
AS/NZS 4131:2010 Polyethylene (PE) compounds for pressure pipes and fittings (Reconfirmed 2022)
AS/NZS 1577:2018 Scaffold decking components
AS/NZS 1605.1:2006 Methods for sampling and analysing timber preservatives and preservative-treated timber General requirements, sampling, and determination of sapwood and heartwood presence
AS 2318-2006 Swivels for lifting applications (Reconfirmed 2022)
AS 5588-2013 Grapevine propagation material
AS 3571.1-2009 Plastics piping systems - Glass reinforced thermoplastics (GRP) systems based on unsaturated polyester (UP) resin Pressure and non-pressure drainage and sewerage (ISO 10467:2004, MOD)
AS 4738.1-2007 Metal castings Ferrous sand moulded
AS/NZS 60079.7:2006 Explosive atmospheres Equipment protection by increased safety 'e'
AS 4738.1-2004 Metal castings Ferrous sand moulded
AS 1138-2008 Thimbles for wire rope (Reconfirmed 2019)
AS 1448-2007 Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum)
AS 4371-2012 Ceramic tableware
AS/NZS 4455.3:2008 Masonry units, pavers, flags and segmental retaining wall units Segmental retaining wall units (Reconfirmed 2020)
AS/NZS 4129:2008 Fittings for polyethylene (PE) pipes for pressure applications
AS 4285-2007 Skylights
AS/NZS 2272:2006 Plywood - Marine (Reconfirmed 2016)
AS 4049.1-2005 Paints and related materials - Pavement marking materials Solvent-borne paint - For use with surface applied glass beads (Reconfirmed 2016)
AS 4314-2005 Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores
AS 4256.3-2006 Plastic roof and wall cladding materials Glass fibre reinforced polyester (GRP) (Reconfirmed 2018)
AS/NZS 2642.2:2008 Polybutylene (PB) plumbing pipe systems Polybutylene (PB) pipe for hot and cold water applications (Reconfirmed 2022)
AS/NZS 3679.2:2010 Structural steel Welded I sections
AS 4256.5-2006 Plastic roof and wall cladding materials Polycarbonate (Reconfirmed 2018)
AS/NZS 3678:2011 Structural steel - Hot-rolled plates, floorplates and slabs
AS/NZS 2210.4:2009 Occupational protective footwear Specification for protective footwear (ISO 20346:2004, MOD)
AS 2001.2.25.2-2006 Methods of test for textiles Physical tests - Determination of the abrasion resistance of fabrics by the Martindale method - Determination of specimen breakdown
AS 2453-2004 Electroplated coatings - Chromium for engineering applications (Reconfirmed 2017)
AS 1666.1-2009 Wire-rope slings Product specification (Reconfirmed 2019)
AS 3996-2006 Access covers and grates
AS 3705-2003 Geotextiles - Identification, marking, and general data
AS/NZS 4179:2014 Single-use sterile rubber surgical gloves - Specification (ISO 10282:2014, MOD)
AS 2944.1-2007 Plastics pipes and fittings for gas reticulation Polyamide pipes (Reconfirmed 2023)
AS 3818.1-2003 Timber - Heavy structural products - Visually graded General requirements
AS 4169-2004 Electroplated coatings - Tin and tin alloys (ISO 2093:1986, MOD) (Reconfirmed 2017)
AS/NZS 2269.0:2008 Plywood - Structural Specifications
AS/NZS 4130:2009 Polyethylene (PE) pipes for pressure applications

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.