AS 1170.4-2007
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Structural design actions Earthquake actions in Australia (Reconfirmed 2018)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
11-20-2024
10-09-2007
Sets out data and procedures for determining earthquake loads on structures and their components, and also minimum detailing requirements for structures. Domestic structures are covered in an Appendix.
Committee |
BD-006
|
DocumentType |
Standard
|
ISBN |
0 7337 8349 X
|
Pages |
45
|
ProductNote |
Reconfirmed 16/03/2018.This standard has been reconfirmed in Australia in 2018 and remains current in New Zealand. Reconfirmation Notice 16/03/2018
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes | |
UnderRevision |
This Standard sets out procedures for determining earthquake actions and detailing requirements for structures and components to be used in the design of structures. It also includes requirements for domestic structures.Importance level 1 structures are not required to be designed for earthquake actions.The following structures are outside the scope of this Standard:(a) High-risk structures.(b) Bridges.(c) Tanks containing liquids.(d) Civil structures including dams and bunds.(e) Offshore structures that are partly or fully immersed.(f) Soil-retaining structures.(g) Structures with first mode periods greater than 5 s.This Standard does not consider the effect on a structure of related earthquake phenomena such as settlement, slides, subsidence, liquefaction or faulting.NOTES:1 For structures in New Zealand, see NZS 1170.5.2 For earth-retaining structures, see AS 4678.
Originated as AS2121-1979.
Revised and redesignated as AS1170.4-1993.
Second edition 2007.
Reissued incorporating Amendment No. 1 (August 2015).
Reissued incorporating Amendment No. 2 (February 2018).
AS 1720.1-1997 | Timber structures Design methods |
AS/RISSB 7720 : 2017 | Signalling Equipment Enclosure and Wiring |
AS 1684.1-1999 | Residential timber-framed construction Design criteria |
AS 1684.2-2006 | Residential timber-framed construction Non-cyclonic areas (SEE IMPORTANT NOTE) |
AS 3700 SUPP 1-2004 | Masonry structures - Commentary (Supplement to AS 3700-2001) |
AS 3600 SUPP 1-1994 | Concrete structures - Commentary (Supplement to AS 3600-1994) |
AS 4100-1998 | Steel structures (Reconfirmed 2016) |
AS 4100 SUPP 1-1999 | Steel structures - Commentary (Supplement to AS 4100-1998) |
AS 3700-2001 | Masonry structures |
AS/NZS 1664.2:1997 | Aluminium structures Allowable stress design (Reconfirmed 2020) |
AS/NZS 1170.1:2002 | Structural design actions Permanent, imposed and other actions |
AS/NZS 1170.0:2002 | Structural design actions General principles |
AS 3600-2001 | Concrete structures |
AS 1684.4-2006 | Residential timber-framed construction - Simplified Non-cyclonic areas (SEE IMPORTANT NOTE) |
AS 1684.3-2006 | Residential timber-framed construction Cyclonic areas |
AS 4678-2002 | Earth-retaining structures |
AS 3995-1994 | Design of steel lattice towers and masts |
AS 1684.3-2010 | Residential timber-framed construction Cyclonic areas |
AS 1684.4-2010 | Residential timber-framed construction Simplified - Non-Cyclonic Areas |
AS 2304:2019 | Water storage tanks for fire protection systems |
AS 3735-2001 | Concrete structures for retaining liquids |
AS/NZS 1596:2002 | The storage and handling of LP Gas |
AS/NZS 1576.1:2010 | Scaffolding General requirements |
AS 1940:2017 | The storage and handling of flammable and combustible liquids |
AS 1684.2-2010 | Residential timber-framed construction Non-cyclonic areas |
AS/NZS 3015:2004 | Electrical installations - Extra-low voltage d.c. power supplies and service earthing within public telecommunications networks |
AS 3892-2001 | Pressure equipment - Installation (Reconfirmed 2016) |
AS/NZS 1838:1994 | Swimming pools - Premoulded fibre-reinforced plastics - Design and fabrication |
AS/NZS 4284:1995 | Testing of building facades |
AS 2159-1995 | Piling - Design and installation |
AS/NZS 4600:2018 | Cold-formed steel structures |
AS 3600-2001 | Concrete structures |
AS 4425-1996 | Above ground burial structures |
AS 1725.3-2010 | Chain link fabric fencing Tennis court fencing - Private/Residential (Reconfirmed 2020) |
AS 3961-2005 | The storage and handling of liquefied natural gas |
AS/NZS 7000:2016 | Overhead line design |
AS 3610-1995 | Formwork for concrete |
AS/NZS 5070.1:2008 | Siting and operation of radiocommunications facilities General guidelines for fixed, mobile and broadcasting facilities including fixed location satellite earth stations independent of the operating frequency (Reconfirmed 2019) |
AS 1445-2013 | Hot-dipped zinc-coated, aluminium/zinc-coated or aluminium/zinc/magnesium-coated steel sheet - 76 mm pitch corrugated |
AS 1210-2010 | Pressure vessels (Reconfirmed 2021) |
AS 2021-2000 | Acoustics - Aircraft noise intrusion - Building siting and construction |
AS 4084-2012 | Steel storage racking |
AS/NZS 4994.4:2018 | Temporary edge protection Perimeter Protection Screens |
AS 3700 SUPP 1-2004 | Masonry structures - Commentary (Supplement to AS 3700-2001) |
AS 1894-1997 | The storage and handling of non-flammable cryogenic and refrigerated liquids (Reconfirmed 2021) |
AS 1228-2006 | Pressure equipment - Boilers |
AS 2419.1:2017 | Fire hydrant installations System design, installation and commissioning |
AS 2159-2009 | Piling - Design and installation |
AS 1940-2004 | The storage and handling of flammable and combustible liquids |
AS 3700:2018 | Masonry Structures |
AS 4041-2006 | Pressure piping (Reconfirmed 2016) |
AS 3700:2018 Sup 1:2020 | Masonry structures - Commentary (Supplement 1 to AS 3700:2018) |
AS/NZS 3084:2003 | |
AS/NZS 2041.1:2011 | Buried corrugated metal structures Design methods |
AS/NZS 3009:1998 | Electrical installations - Emergency power supplies in hospitals |
AS 2941-2008 | Fixed fire protection installations - Pumpset systems |
AS 3623-1993 | Domestic metal framing (Reconfirmed 2018) |
SA HB 108-2013 | Timber design handbook |
AS 2676.2:2020 | Guide to the installation, maintenance, testing and replacement of secondary batteries in buildings Sealed cells |
AS 4773.2-2010 | Masonry in small buildings - Construction |
AS 3961:2017 | The storage and handling of liquefied natural gas |
AS 4100-1998 | Steel structures (Reconfirmed 2016) |
AS 3610 SUPP 2-1996 | Formwork for concrete - Commentary (Supplement to AS 3610-1995) |
AS 3700-2001 | Masonry structures |
AS 2885.2-2007 | Pipelines - Gas and liquid petroleum Welding |
AS 2067-2008 | Substations and high voltage installations exceeding 1 kV a.c. |
AS 1725.4-2010 | Chain link fabric fencing Cricket net fencing enclosures (Reconfirmed 2020) |
AS 1838:2021 | Swimming pools - Premoulded fibre-reinforced plastics - Design and fabrication |
AS 3700-2011 | Masonry structures |
AS 4773.1-2010 | Masonry in small buildings Design |
AS 2676.1:2020 | Installation, maintenance, testing and replacement of secondary batteries in buildings Vented cells |
AS 2941-2013 | Fixed fire protection installations - Pumpset systems |
AS/NZS 4509.1:2009 | Stand-alone power systems Safety and installation (Reconfirmed 2017) |
AS 1735.2-2001 | Lifts, escalators and moving walks Passenger and goods lifts - Electric |
AS 3600:2018 | Concrete structures |
AS/NZS 1418.9:1996 | Cranes (including hoists and winches) Vehicle hoists |
AS 2327.1-2003 | Composite structures Simply supported beams |
AS/NZS 3084:2017 | Telecommunications installations - Telecommunications pathways and spaces for commercial buildings |
AS 3533.1-2009 | Amusement rides and devices Design and construction |
AS/NZS 5139:2019 | Electrical installations - Safety of battery systems for use with power conversion equipment |
AS 3774-1996 | Loads on bulk solids containers |
AS 2316.1-2009 | Artificial climbing structures and challenge courses Fixed and mobile artificial climbing and abseiling walls |
AS/NZS 1596:2008 | The storage and handling of LP Gas |
AS 3600-2009 | Concrete structures |
AS/NZS 7000:2010 | Overhead line design - Detailed procedures |
AS 1725.1-2010 | Chain link fabric fencing Security fences and gates - General requirements (Reconfirmed 2020) |
AS 2067:2016 | Substations and high voltage installations exceeding 1 kV a.c. |
AS 1288-2006 | Glass in buildings - Selection and installation |
AS 1210-1997 | Pressure vessels |
AS 1228:2016 | Pressure equipment - Boilers |
AS 4425:2020 | Above‑ground burial structures |
AS/NZS 2327:2017 | Composite structures - Composite steel-concrete construction in buildings |
AS 3785.5-1998 | Underground mining - Shaft equipment Headframes |
AS/NZS 4284:2008 | Testing of building facades |
AS 1735.1-2003 | Lifts, escalators and moving walks General requirements |
AS 4440-2004 | Installation of nailplated timber roof trusses |
AS/NZS 2785:2000 | Suspended ceilings - Design and installation |
AS 1375-2013 | Industrial fuel-fired appliances |
AS 5100.2:2017 | Bridge design Design loads |
AS 1720.3:2016 | Timber structures Design criteria for timber-framed residential buildings |
AS 2304-2011 | Water storage tanks for fire protection systems |
AS 2885.1-2012 | Pipelines - Gas and liquid petroleum Design and construction |
AS/NZS 4509.2:2010 | Stand-alone power systems System design (Reconfirmed 2017) |
AS/NZS 1596:2014 | The storage and handling of LP Gas |
AS/NZS 2293.1:2018 | Emergency lighting and exit signs for buildings System design, installation and operation |
AS 4324.1:2017 | Mobile equipment for continuous handling of bulk materials General requirements for the design of steel structures |
AS 1725.5-2010 | Chain link fabric fencing Sports ground fencing - General requirements (Reconfirmed 2020) |
AS 2187.1-1998 | Explosives - Storage, transport and use Storage |
AS 2419.1-2005 | Fire hydrant installations System design, installation and commissioning |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.