AS 1100.201-1992
Current
The latest, up-to-date edition.
Technical drawing Mechanical engineering drawing (Reconfirmed 2014)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
11-16-1992
Important note : All end users must be registered with an Account prior to user licenses being assigned.Sets out recommendations for mechanical engineering drawing practice. Provides information on surface texture and welding, and the simplified representation of pipelines. Provides details on springs, gears, splines, rolling element bearings, seals and knurling. Appendices provide guidance on the tolerance of machined components and castings.
| Committee |
ME-072
|
| DocumentType |
Standard
|
| ISBN |
0 7262 7805 X
|
| Pages |
72
|
| ProductNote |
See also HB 1, HB 3, HB 6Reconfirmed 20/01/2014.This standard has been reconfirmed in Australia in 2014 and remains current in New Zealand. Reconfirmation Notice 20/01/2014
|
| PublisherName |
Standards Australia
|
| Status |
Current
|
| Supersedes |
This Standard sets out requirements and recommendations for mechanical engineering drawing practice. It is complementary to AS 1100.101.The Standard provides information on surface texture and welding, and the simplified representationof pipelines. Details are also provided on various mechanical features and parts used on mechanical drawings.Appendices provide guidance on the tolerancing of machined components and castings.
| Standards | Relationship |
| ISO 128:1982 | Identical |
| ISO 5459:1981 | Identical |
| ISO 1101-2:1974 | Identical |
| ISO 2203:1973 | Identical |
| ISO 6410:1981 | Identical |
| ISO 2162:1973 | Identical |
| ISO 406:1987 | Identical |
| ISO 5455:1979 | Identical |
| ISO 129:1985 | Identical |
For history before 1992, see Preface.
Second edition AS 1100.201-1992.
Incorporating Amdt 1-1992.
| AS 1101.1-1993 | Graphic symbols for general engineering - Hydraulic and pneumatic systems |
| AS 1101.3-2005 | Graphical symbols for general engineering Welding and non-destructive examination |
| AS/NZS 1100.501:2002 | Technical drawing Structural engineering drawing (Reconfirmed 2014) |
| AS 1101.2-1972 | Graphical symbols for general engineering Ventilation systems in ships |
| AS 1101.5-1984 | Graphical symbols for general engineering - Piping, ducting and mechanical services for buildings |
| AS 1101.1-2007 | Graphic symbols for general engineering Hydraulic and pneumatic systems |
| AS 1100.301-1985 | Technical drawing Architectural drawing |
| AS 1100.401-1984 | Technical drawing Engineering survey and engineering survey design drawing (Reconfirmed 2014) |
| AS 1100.501-1985 | Technical drawing - Structural engineering drawing |
| AS 1913-1976 | Centre drills |
| AS 2075-1991 | Glossary of terms and notations for gears |
| AS 1100.101-1992 | Technical drawing General principles (Reconfirmed 2014) |
| AS 1101.4-1989 | Graphical symbols for general engineering - Machine elements |
| AS 1101.3-1987 | Graphical symbols for general engineering - Welding and non-destructive examination |
| AS 2536-1982 | Surface texture |
| AS 1085.16-1995 | Railway permanent way material - Part 16: Cast sleeper plates |
| AS 3779-1990 | Height setting micrometers and riser blocks |
| HB 47-1993 | Dimensioning and Tolerancing to AS 1100.101-1992 and AS 1100.201-1992 |
| AS 1085.1-1995 | Railway permanent way material - Part 1: Steel rails |
| AS/NZS 2350.11:2006 | Methods of testing portland, blended and masonry cements Compressive strength |
| AS/NZS 2350.11:2001 | Methods of testing portland, blended and masonry cements Compressive strength |
| AS 1085.1-2002 | Railway track material Steel rails (Reconfirmed 2013) |
| AS 3871.1-1994 | Magnetic tape sound recording and reproducing systems - General conditions and requirements |
| AS 2350.12-2006 | Methods of testing portland, blended and masonry cements Preparation of a standard mortar and moulding of specimens |
| AS 1101.4-1989 | Graphical symbols for general engineering - Machine elements |
| AS 2067-2008 | Substations and high voltage installations exceeding 1 kV a.c. |
| AS 1101.1-1993 | Graphic symbols for general engineering - Hydraulic and pneumatic systems |
| AS 3602-1988 | Information processing - Data interchange on 12.7 mm wide magnetic tape cartridges - 18 tracks, 1491 data bytes per millimetre |
| AS 1100.301-1985 | Technical drawing Architectural drawing |
| AS 1100.401-1984 | Technical drawing Engineering survey and engineering survey design drawing (Reconfirmed 2014) |
| AS 2350.12-1995 | Methods of testing portland and blended cements Preparation of a standard mortar and moulding of specimens |
| AS 1100.101-1992 | Technical drawing General principles (Reconfirmed 2014) |
| AS 1334.13:2017 | Methods of testing conveyor and elevator belting Determination of indentation rolling resistance of conveyor belting |
| AS 1085.1-2000 | Railway permanent way material Steel rails |
| AS 1100.301-2008 | Technical drawing Architectural drawing (Reconfirmed 2018) |
| AS 3531-1988 | Solid and segmental circular saws for cold cutting metals - Interchangeability dimensions of the drive - Saw diameter range 224 mm to 2240 mm |
| AS 4738.1-2007 | Metal castings Ferrous sand moulded |
| AS 4738.1-2004 | Metal castings Ferrous sand moulded |
| AS 4314-2005 | Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
| AS 62271.301-2005 | High voltage switchgear and controlgear Dimensional standardization of terminals (Reconfirmed 2016) |
| AS/NZS 2350.11:1997 | Methods of testing portland and blended cements Compressive strength of portland and blended cements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.