AS 1085.1-2000
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Railway permanent way material Steel rails
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
01-21-2024
English
05-15-2000
Note - due to the age of this archived document, available information is limited therefore this record is incomplete. For further details, please phone our Customer Service Centre on 131 242 (Intl +61 2 8206 6010) or email sales@saiglobal.com.
This publication is a copy of the physical archived hardcopy. Some pages may be stamped or contain handwriting. SAI Global has endeavoured to reproduce this document to the best possible standard of quality. Please utilise the preview feature to sample the quality before purchasing.
This Standard specifies requirements for as-rolled and hardened steel rails made from continuously cast blooms and profiles for asymmetric switch rails and elevated guardrails for railway purposes.
Committee |
CE-002
|
DocumentType |
Standard
|
Pages |
39
|
PublisherName |
Standards Australia
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This Standard specifies requirements for as-rolled and hardened steel rails made from continuously cast blooms and profiles for asymmetric switch rails and elevated guardrails for railway purposes.NOTES: 1 Guidelines to purchasers are given in Appendix A.2 Guidance on the means for demonstrating compliance with this Standard is given in Appendix B.3 Information on residual stresses in rail is given in Appendix C.
First published as AS E1-1925T.
Revised and redesignated in part as AS E22-1928.
Redated 1932.
Redated 1935.
Redated 1937.
Fifth edition 1939.
Sixth edition 1949.
Seventh edition 1964.
Revised and redesignated as AS 1085.1-1977.
Second edition 1981.
Third edition 1990.
AS 1085.11 first published 1985.
Second edition 1992.
Fourth edition AS 1085.1-1995.
AS 1085.1-1995 and AS 1085.11-1992 revised, amalgamated and redesignated as AS 1085.1-2000.
AS 1050.17-1988 | Methods for the analysis of iron and steel Determination of copper content - Spectrophotometric method |
AS 1050.20-1983 | |
AS 1050.26-1978 | Methods for the analysis of iron and steel Determination of silicon in iron and steel (spectrophotometric method) |
AS 1050.19-1988 | Methods for the analysis of iron and steel Determination of nickel content - Spectrophotometric method |
AS 1199-1988 | Sampling procedures and tables for inspection by attributes |
AS 1050.23-1990 | Methods for the analysis of iron and steel Determination of molybdenum content - Flame atomic absorption spectrometric method |
HB 18.28-1991 | Guidelines for third-party certification and accreditation - Guide 28: General rules for a model third-party certification system for products |
AS 1050.18-1984 | Methods for the analysis of iron and steel - Determination of phosphorus (spectrophotometric method) |
AS 1050.30-1978 | Methods for the analysis of iron and steel Determination of boron in steel (spectrophotometric method using curcumin) |
AS 1050.2-1984 | Methods for the analysis of iron and steel - Determination of carbon content (gravimetric method) |
AS 1399-1990 | Guide to AS 1199 - Sampling procedures and tables for inspection by attributes |
AS/NZS ISO 9000.1:1994 | Quality management and quality assurance standards Guidelines for selection and use |
AS 2205.5.1-1997 | Methods for destructive testing of welds in metal Macro metallographic test for cross-section examination |
AS 1050.8-1980 | Methods for the analysis of iron and steel Determination of manganese content in iron and steel (spectrophotometric method) |
AS 1050.32-1984 | Methods for the analysis of iron and steel - Determination of carbon content (infrared method) |
AS 1050.27-1984 | Methods for the analysis of iron and steel - Determination of titanium in iron and steel (spectrophotometric method) |
AS 1050.28-1974 | Methods for the analysis of iron and steel Determination of vanadium in steel (potentiometric method) |
AS 1391-1991 | Methods for tensile testing of metals |
AS 1050.29-1989 | Methods for the analysis of iron and steel Determination of cobalt content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS 1050.14-1981 | |
AS 1100.201-1992 | Technical drawing Mechanical engineering drawing (Reconfirmed 2014) |
AS 1929-1981 | Non-destructive testing - Glossary of terms |
AS 1817-1991 | Metallic materials - Vickers hardness test |
AS 1050.25-1986 | Methods for the analysis of iron and steel Determination of lead content (flame atomic absorption spectrometric method) |
AS 1003-1971 | Engineers' straightedges (metric units) |
AS 1050.9-1984 | Methods for the analysis of iron and steel - Determination of chromium (potentiometric method) |
AS 1816-1990 | Metallic materials - Brinell hardness test |
AS/NZS ISO 9004.1:1994 | Quality management and quality system elements Guidelines |
AS 1050.12-1983 | Methods for the analysis of iron and steel Determination of nitrogen in steel (steam distillation titrimetric method) (Reconfirmed 2016) |
AS 2706-1984 | Numerical values - Rounding and interpretation of limiting values |
AS 1050.33-1988 | Methods for the analysis of iron and steel Determination of nickel content - Flame atomic absorption spectrometric method (Reconfirmed 2016) |
AS 1050.31-1981 | Methods for the analysis of iron and steel Determination of niobium in steel (spectrophotometric method) |
AS 1418.18-2001 | Cranes, hoists and winches Crane runways and monorails |
AS 1418.1-2002 | Cranes, hoists and winches General requirements |
AS 1085.3-2000 | Railway permanent way material - Part 3: Sleeper plates |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.