AS 1065-1988
Current
The latest, up-to-date edition.
Non-destructive testing - Ultrasonic testing of carbon and low alloy steel forgings (Reconfirmed 2022)
Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
06-17-1988
Sets out methods for manual ultrasonic testing of carbon and low alloy steel forgings at three recording levels by the use of equivalent reflector sizes. Appendices provide information on probe selection, reflectivity diagrams, testing of curved surfaces, selection of beam angle and classification of discontinuities.
Committee |
MT/7
|
DocumentType |
Standard
|
ISBN |
0 7262 5053 8
|
Pages |
28
|
ProductNote |
Pending Revision indicates that as a result of the Aged Standards review process, the document needs updating. If no project proposal, meeting the quality criteria, is received within the 12 month timeframe, the document shall be withdrawn.
|
PublisherName |
Standards Australia
|
Status |
Current
|
Supersedes | |
UnderRevision |
This Standard sets out methods for manual ultrasonic testing of carbon and low alloy steel forgings, at three recording levels, by the use of equivalent reflector sizes.NOTE: Appendix A sets out information that should be supplied to the testing personnel before the commencement of the test.
First published as AS 1065-1971.
Revised and redesignated AS 1065-1978.
Second edition 1988.
AS 1929-1981 | Non-destructive testing - Glossary of terms |
AS 3797.1-1991 | Hand hammers General requirements |
AS 2740-2001 | Wedge-type sockets |
AS 3777-1990 | Shank hooks and large-eye hooks - Maximum 25 t |
AS 3785.7-1993 | Underground mining - Shaft equipment Sheaves |
AS 2938-1993 | Gears - Spur and helical - Guide to specification and rating |
AS 2319-2001 | Rigging screws and turnbuckles |
AS 1138-1992 | Thimbles for wire rope |
AS 2089-1993 | Sheave blocks for lifting purposes |
AS 1796-2001 | Certification of welders and welding supervisors (Reconfirmed 2016) |
AS 4037-1992 | Boilers and pressure vessels - Examination and testing |
AS 4722-2009 | Passenger ropeways and passenger conveyors |
AS 1796-1993 | Certification of welders and welding supervisors |
AS 3751-2005 | Underground mining - Slope haulage - Couplings, drawbars, and safety chains |
AS 3775.1-2004 | Chain slings - Grade T Product specification |
AS 3533.3-2003 | Amusement rides and devices In-service inspection (Reconfirmed 2013) |
AS 3954:2019 | Motor vehicle driver controls - Adaptive systems for people with disabilities |
AS 3637.1-2005 | Underground mining - Winding suspension equipment General requirements (Reconfirmed 2017) |
AS 5100.8:2017 | Bridge design Rehabilitation and strengthening of existing bridges |
AS 4041-1992 | Pressure piping |
AS 4037-1999 | Pressure equipment - Examination and testing (Reconfirmed 2016) |
AS 2089-2008 | Sheave blocks for lifting purposes (Reconfirmed 2019) |
AS/NZS 4344:1995 | Cargo restraint systems - Transport chain and components |
AS 2317-1998 | Collared eyebolts |
AS 3954.2-1991 | Motor vehicle controls - Adaptive systems for people with disabilities Hand controls - Product requirements (Reconfirmed 2014) |
AS/NZS 4344:2001 | Motor vehicles - Cargo restraint systems - Transport chain and components |
AS 2837-1986 | Wrought alloy steels - Stainless steel bars and semi-finished products |
AS 3777-2008 | Shank hooks and large eye hooks - Maximum 60 t (Reconfirmed 2019) |
AS 2318-2006 | Swivels for lifting applications (Reconfirmed 2022) |
AS 2741-1992 | Shackles |
AS 1448-2007 | Carbon steel and carbon-manganese steels - Forgings (ruling section 300 mm maximum) |
AS 3585-1990 | End fittings for flat-webbing slings |
AS 1210 SUPP 1-1990 | |
AS 3785.7-2006 | Underground mining - Shaft equipment Sheaves (Reconfirmed 2023) |
AS 2741-2002 | Shackles (Reconfirmed 2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.