API SPEC 11D1 : 2015
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PACKERS AND BRIDGE PLUGS
Amended by
Available format(s)
Hardcopy , PDF
Superseded date
08-27-2019
Superseded by
Language(s)
English
Published date
04-01-2015
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative References
3 Terms and Definitions
4 Acronyms, Abbreviations, and Symbols
5 Functional Specification
6 Technical Specification
7 Supplier's/Manufacturer's Requirements
8 Repair
9 Shipment/Storage
Annex A (informative) - Use of API Monogram by
Licensees
Annex B (informative) - Requirements for HPHT
Environment Equipment
Annex C (normative) - Requirements for HPHT
Operational Tools
Annex D (informative) - Requirements for External
Flow Testing
Bibliography
Describes requirements and guidelines for packers and bridge plugs as defined herein for use in the petroleum and natural gas industry.
| DevelopmentNote |
Also numbered as ISO 14310. (07/2009) Chinese version of 2ED 2009 is still available, see API 11D1 CHINESE. (08/2011) Also available in Russian translation, see API 11D1 RUSSIAN. (01/2018)
|
| DocumentType |
Standard
|
| Pages |
72
|
| ProductNote |
NEW CHILD ERR 1 2019 IS ADDED
|
| PublisherName |
American Petroleum Institute
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| 15/30275410 DC : 0 | BS EN ISO 16530-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - WELL INTEGRITY - PART 1: LIFE CYCLE GOVERNANCE |
| NORSOK D 007:2013 | WELL TESTING SYSTEM |
| 16/30292328 DC : 0 | BS ISO 27914 - CARBON DIOXIDE CAPTURE, TRANSPORTATION AND GEOLOGICAL STORAGE - GEOLOGICAL STORAGE |
| BS ISO 27914:2017 | Carbon dioxide capture, transportation and geological storage. Geological storage |
| ISO 27914:2017 | Carbon dioxide capture, transportation and geological storage Geological storage |
| API 96 : 2013 | DEEPWATER WELL DESIGN AND CONSTRUCTION |
| API 14A : 2015 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| CSA Z741 :2012 | GEOLOGICAL STORAGE OF CARBON DIOXIDE |
| CSA Z741 : 2012 : R2017 | GEOLOGICAL STORAGE OF CARBON DIOXIDE |
| API SPEC 19AC : 2016 | SPECIFICATION FOR COMPLETION ACCESSORIES |
| ISO 812:2017 | Rubber, vulcanized or thermoplastic — Determination of low-temperature brittleness |
| ISO 6507-1:2005 | Metallic materials Vickers hardness test Part 1: Test method |
| ASME PV CODE 8 DIV 2 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
| ASTM D 297 : 2015 : REDLINE | Standard Test Methods for Rubber Products—Chemical Analysis |
| ISO 1432:2013 | Rubber, vulcanized or thermoplastic Determination of low-temperature stiffening (Gehman test) |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 10893-5:2011 | Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| ASNT SNT TC 1A : 2016 | TOPICAL OUTLINES FOR QUALIFICATION OF NONDESTRUCTIVE TESTING PERSONNEL |
| ISO/TS 29001:2010 | Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply organizations |
| ASTM D 429 : 2014 : REDLINE | Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates |
| API 20A : 2017 | CARBON STEEL, ALLOY STEEL, STAINLESS STEEL, AND NICKEL BASE ALLOY CASTINGS FOR USE IN THE PETROLEUM AND NATURAL GAS INDUSTRY |
| ASME PV CODE 9 : 2017 | BOILER AND PRESSURE VESSEL CODE - WELDING, BRAZING, AND FUSING QUALIFICATIONS - QUALIFICATION STANDARD FOR WELDING, BRAZING, AND FUSING PROCEDURES; WELDERS; BRAZERS; AND WELDING, BRAZING, AND FUSING OPERATORS |
| ISO 9712:2012 | Non-destructive testing Qualification and certification of NDT personnel |
| API 5CT : 2012 | CASING AND TUBING |
| ISO 815-1:2014 | Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures |
| ASTM D 1414 : 2015 : REDLINE | Standard Test Methods for Rubber O-Rings |
| ASME PV CODE 8 DIV 1 : 2017 | BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
| ISO 6508-1:2016 | Metallic materials — Rockwell hardness test — Part 1: Test method |
| ASTM D 736 : 1954 | Method of Test for Low-Temperature Brittleness of Rubber and Rubber-Like Materials (Withdrawn 1965) |
| ISO 23936-1:2009 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics |
| ASME PV CODE 8 DIV 3 : 2017 | BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
| ASME B46.1 : 2009 | SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY) |
| SAE AS 568 : 2014 | AEROSPACE SIZE STANDARD FOR O-RINGS |
| ISO 34-1:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
| ASTM E 10 : 2017-05 | TEST METHOD FOR BRINELL HARDNESS OF METALLIC MATERIALS |
| ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers |
| API 6J : 1992 | BULLETIN ON TESTING OF OILFIELD ELASTOMERS - A TUTORIAL |
| API Q1 : 2013 | SPECIFICATION FOR QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR MANUFACTURING ORGANIZATIONS FOR THE PETROLEUM AND NATURAL GAS INDUSTRY |
| ASTM D 790 : 2017 : REDLINE | Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials |
| ISO 13665:1997 | Seamless and welded steel tubes for pressure purposes Magnetic particle inspection of the tube body for the detection of surface imperfections |
| ASME PV CODE 5 : 2017 | BOILER AND PRESSURE VESSEL CODE - NONDESTRUCTIVE EXAMINATION |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ASTM E 111 : 2017 : REDLINE | Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus |
| BS 2M 54:1991 | Specification for temperature control in the heat treatment of metals |
| ISO 37:2017 | Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| ASTM D 695 : 2015 : REDLINE | Standard Test Method for Compressive Properties of Rigid Plastics |
| SAE AMS H 6875 : 2010 | HEAT TREATMENT OF STEEL RAW MATERIALS |
| ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
| ISO 34-2:2015 | Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| ASTM D 638 : 2014 : REDLINE | Standard Test Method for Tensile Properties of Plastics |
| ASTM D 329 : 2007 | Standard Specification for Acetone |
| MIL-STD-413 Revision C:1980 | VISUAL INSPECTION GUIDE FOR ELASTOMERIC O-RINGS |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| ISO 12095:1994 | Seamless and welded steel tubes for pressure purposes Liquid penetrant testing |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.