ANSI Z358.1 : 2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
EMERGENCY EYEWASH AND SHOWER EQUIPMENT
Hardcopy , PDF
08-17-2024
English
01-01-2014
Important note : All end users must be registered with an Account prior to user licenses being assigned.
SECTION
1. Scope
2. Purpose
3. Definitions
4. Emergency Showers
5. Eyewash Equipment
6. Eye/Face Wash Equipment
7. Combination Units
8. Supplemental Equipment
ILLUSTRATIONS
Illustration 1 - Emergency Shower - Overhead Type
Illustration 2 - Emergency Shower - Multi-Nozzle
Illustration 3 - Emergency Shower - Multi-Nozzle with
Overhead Fixture
Illustration 4 - Plumbed Eyewash
Illustration 5 - Nonpressurized Self-Contained Eyewash
Illustration 6 - Pressurized Self-Contained Eyewash
Illustration 7 - Typical Eyewash Gauge
Illustration 8 - Eye/Face Wash
Illustration 9 - Combination Unit
Illustration 10 - Personal Wash Units
Illustration 11 - Drench Hose
Illustration 12 - Drench Hose with Eyewash Attachment
APPENDICES
Appendix A - Safety Considerations
Appendix B - Installation Considerations
REFERENCES
Describes minimum performance and use requirements for eyewash and shower equipment for the emergency treatment of the eyes or body of a person who has been exposed to hazardous materials.
| DevelopmentNote |
Supersedes WW P 541/7 (C). (07/2004)
|
| DocumentType |
Standard
|
| Pages |
29
|
| PublisherName |
Safety Equipment Association
|
| Status |
Superseded
|
| SupersededBy |
| AAMI ST91 : 2015 | FLEXIBLE AND SEMI-RIGID ENDOSCOPE PROCESSING IN HEALTH CARE FACILITIES |
| AAMI ST65 : 2008 : R2013 | PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES |
| MIL-STD-1443 Revision A:1994 | INORGANIC ACIDS AND ACID ANHYDRIDES, REAGENT GRADE (INCLUDING ACS AND USP-NF COMPOUNDS) |
| ASTM D 6498 : 1999 : R2007 | Standard Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations (Withdrawn 2016) |
| AAMI ST65:2008(R2018) | PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES |
| AAMI ST41 : 2008 | ETHYLENE OXIDE STERILIZATION IN HEALTH CARE FACILITIES: SAFETY AND EFFECTIVENESS |
| ASTM D 6498 : 1999 | Standard Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations |
| IEEE 1657-2009 | IEEE Recommended Practice for Personnel Qualifications for Installation and Maintenance of Stationary Batteries |
| UFC 3-520-05 : Change 1 | UNIFIED FACILITIES CRITERIA - STATIONARY BATTERY AREAS |
| UFC 4-510-01 : Change 2 | UNIFIED FACILITIES CRITERIA - DESIGN: MILITARY MEDICAL FACILITIES |
| AIHA Z9.3 : 2007 | SPRAY FINISHING OPERATIONS - SAFETY CODE FOR DESIGN, CONSTRUCTION, AND VENTILATION |
| MIL-STD-1446 Revision A:1994 | METAL ORGANIC COMPOUNDS, REAGENT GRADE (INCLUDING ACS & USP-NF COMPOUNDS) |
| IEEE 1187-2013 REDLINE | IEEE Recommended Practice for Installation Design and Installation of Valve-Regulated Lead-Acid Batteries for Stationary Applications |
| AAMI TIR67 : 2018 | PROMOTING SAFE PRACTICES PERTAINING TO THE USE OF STERILANT AND DISINFECTANT CHEMICALS IN HEALTH CARE FACILITIES |
| ASTM D 6498 : 1999 : R2002 | Standard Guide for Household Hazardous Waste Training Outline for Household Hazardous Waste Collection Operations |
| ANSI/AAMI ST79:2017 | COMPREHENSIVE GUIDE TO STEAM STERILIZATION AND STERILITY ASSURANCE IN HEALTH CARE FACILITIES |
| UFC 4-211-01 : Change 1 | UNIFIED FACILITIES CRITERIA - AIRCRAFT MAINTENANCE HANGARS |
| UFC 3-420-01 : Change 10 | UNIFIED FACILITIES CRITERIA - PLUMBING SYSTEMS |
| UFC 3-460-01 : Change 3 | UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
| AIHA Z9.1 : 2006 | VENTILATION AND CONTROL OF AIRBORNE CONTAMINANTS DURING OPEN-SURFACE TANK OPERATIONS |
| CSA Z317.1 : 2016 | SPECIAL REQUIREMENTS FOR PLUMBING INSTALLATIONS IN HEALTH CARE FACILITIES |
| MIL-STD-1622 Revision B:1999 | STANDARD PRACTICE FOR CLEANING OF SHIPBOARD COMPRESSED AIR SYSTEMS |
| API RP 74 : 2001 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| AAMI ST65 : 2008 | PROCESSING OF REUSABLE SURGICAL TEXTILES FOR USE IN HEALTH CARE FACILITIES |
| ICC IPC CODE & COMMENTARY : 2015 | IPC® Code and Commentary |
| NASA STD 8719.24 : 2011 | NASA EXPENDABLE LAUNCH VEHICLE PAYLOAD SAFETY REQUIREMENTS |
| ICC 2012 INTERNATIONAL PLUMBING CODE : 2012 | INTERNATIONAL PLUMBING CODE (INCLUDES IPSDC) |
| ANSI L1.1 : 1981 | SAFETY AND HEALTH REQUIREMENTS FOR THE TEXTILE INDUSTRY, |
| API 54 RUSSIAN : 19991 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| MIL-STD-1201 Revision C:1994 | ETHYL ALCOHOL (ETHANOL), TECHNICAL AND DENATURED GRADES |
| API RP 74 : 2001 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| API 54 : 1999 : R2013 | RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| AIHA Z9.3 : 2007 | SPRAY FINISHING OPERATIONS - SAFETY CODE FOR DESIGN, CONSTRUCTION, AND VENTILATION |
| ANSI/ASSP Z9.1 : 2016 | VENTILATION AND CONTROL OF AIRBORNE CONTAMINANTS DURING OPEN-SURFACE TANK OPERATIONS |
| NFPA 70E : 2018 | ELECTRICAL SAFETY IN THE WORKPLACE |
| MIL-STD-1445 Revision A:1994 | METAL ORGANIC COMPOUNDS, TECHNICAL GRADE |
| ANSI/AAMI ST58:2013(R2018) | CHEMICAL STERILIZATION AND HIGH-LEVEL DISINFECTION IN HEALTH CARE FACILITIES |
| IEEE 515-2011 | IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Industrial Applications |
| API 54 RUSSIAN : 1999 : R2007 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
| AIHA Z9.1 : 2006 | VENTILATION AND CONTROL OF AIRBORNE CONTAMINANTS DURING OPEN-SURFACE TANK OPERATIONS |
| API 751 : 2013 | SAFE OPERATION OF HYDROFLUORIC ACID ALKYLATION UNITS |
| API RP 74 : 2001 : R2013 | RECOMMENDED PRACTICE FOR OCCUPATIONAL SAFETY FOR ONSHORE OIL AND GAS PRODUCTION OPERATION |
| IEEE 515.1-2012 | IEEE Standard for the Testing, Design, Installation, and Maintenance of Electrical Resistance Trace Heating for Commercial Applications |
| API 54 :1999 | RECOMMENDED PRACTICES FOR OCCUPATIONAL SAFETY FOR OIL AND GAS WELL DRILLING AND SERVICING OPERATIONS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.