ANSI/SAE Z26.1:1996

Section 1. Definition
  1.1 Bullet-Resistant Glazing
  1.2 Bullet-Resistant Shield
  1.3 Bus
  1.4 Camper
  1.5 Glass-Plastic Glazing Material
  1.6 Laminated Glass
  1.7 Manufacturer
  1.8 Model Number
  1.9 Motorhome
  1.10 Motor Vehicle
  1.11 Multiple Glazed Unit
  1.12 Multipurpose Passenger Vehicle (MPV)
  1.13 Passenger car
  1.14 Pickup cover
  1.15 Plastic
  1.16 Readily Removable Windows
  1.17 Safety Glass
  1.18 Safety Glazing Materials
  1.19 Safety Glazing Plastics
  1.20 Slide-in Camper
  1.21 Tempered Glass
  1.22 Trailer
  1.23 Truck
Section 2. General
  2.1 Use of Descriptive Terms
  2.2 Degree of Safety
  2.3 Purpose of Tests
  2.4 Referenced Standards
Section 3. Specimens To Be Tested
  3.1 General
  3.2 Tempered Glass
  3.3 Laminated Glass
  3.4 Glass-Plastic Glazing Materials
  3.5 Multiple Glazed Units
  3.6 Plastics More Than 1.27 mm (0.050 in) in Thickness
  3.7 Plastics 1.27 mm (0.050 in) in Thickness or Less
  3.8 Bullet-Resistant Glazing
  3.9 Specimens for Egress Test 25
Section 4. Application of Tests
  4.1 Condition of Specimens
  4.2 Groupings of Tests
Section 5. Test Specifications
  5.1 Light Stability, Test 1
  5.2 Luminous Transmittance, Test 2
  5.3 Humidity, Test 3
  5.4 Boil, Test 4
  5.5 Bake, Test 5 (Multiple Glazed Unit Only)
  5.6 Impact, Test 6 (Ball Drop, 3.05 m [10 ft])
  5.7 Fracture, Test 7
  5.8 Impact, Test 8 (Shot Bag)
  5.9 Impact, Test 9 (Dart Drop, 9.14 m [30 ft])
  5.10 Impact, Test 10 (Dart Drop, Table 2 Heights)
  5.11 Impact, Test 11 (Dart Drop, 3.05 m [10 ft])
  5.12 Impact, Test 12 (Ball Drop, 9.14 m [30 ft])
  5.13 Impact, Test 13 (Ball Drop, Table 2 Heights)
  5.14 Impact, Test 14 (Ball Drop, Variable) (Multiple Glazed
       Unit, Class 2 Only)
  5.15 Optical Deviation and Visibility Distortion, Test 15
  5.16 Weathering, Test 16
  5.17 Abrasion Resistance, Test 17 (Plastics)
  5.18 Abrasion Resistance, Test 18 (Safety Glazed Material)
  5.19 Chemical Resistance, Test 19 (Nonstressed)
  5.20 Chemical Resistance, Test 20 (Stressed)
  5.21 Dimensional Stability, Test 21 (Warpage)
  5.22 Flexibility, Test 22
  5.23 Flammability, Test 23 (1.27 mm [0.050 in] or Less in
       Thickness
  5.24 Flammability, Test 24 (More Than 1.27 mm [0.050 in] in
       Thickness
  5.25 Egress, Test 25
  5.26 Penetration Resistance, Test 26
  5.27 Ballistics, Test 27
  5.28 Resistance to Temperature Change, Test 28
  5.29 Impact, Test 29 (Ball Drop, 6.10 m [20 ft])
  5.30 Light Stability, Test 30
  5.31 Luminous Transmittance, Test 31
  5.32 Optical Deviation and Visibility Distortion, Test 32
Section 6. Edges
Section 7. Marking of Safety Glazing Materials
Appendix

It is the fundamental purpose of this standard to prescribe the functional properties of safety glazing materials in such a manner that they can be used in any place in motor vehicles and motor vehicle equipment for which they possess those mechanical or optical properties, or both, that are requisite and appropriate.