ANSI S1.11 : 2014
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SPECIFICATION FOR OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND ANALOG AND DIGITAL FILTERS
Available format(s)
Hardcopy , PDF
Superseded date
07-02-2014
Superseded by
Language(s)
English
Published date
07-02-2014
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Definitions
4 Performance requirements
5 Performance verification
6 Instrument marking
7 Instruction manual
Annexes
A Midband frequencies
B Normalized frequencies at breakpoints of limits on minimum
and maximum relative attenuation for one-third-octave-band
filters
C Recommendations for verification of the electrical performance
characteristics of bandpass filters
D Test methods
Tables
Figures
Provides performance requirements for analog, sampled-data, and digital implementations of band-pass filters that comprise a filter set or spectrum analyzer for acoustical measurements.
| Committee |
S1
|
| DevelopmentNote |
Supersedes CSA Z107.5. (04/2002)
|
| DocumentType |
Standard
|
| Pages |
50
|
| PublisherName |
Acoustical Society of America
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| MIL S 81963 : B | SERVO-COMPONENT, PRECISION INSTRUMENT, ROTATING, COMMON REQUIREMENTS AND TESTS, GENERAL SPECIFICATION FOR |
| 10/30216184 DC : 0 | BS EN 62271-113 ED1 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 113: STANDARD PRACTICE FOR THE MEASUREMENT OF SOUND PRESSURE LEVELS OF OUTDOOR CIRCUIT BREAKERS |
| BS IEC 62271-37-082 : 2012 | HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 37-082: STANDARD PRACTICE FOR THE MEASUREMENT OF SOUND PRESSURE LEVELS ON ALTERNATING CURRENT CIRCUIT-BREAKERS |
| 10/30162951 DC : DRAFT MAY 2010 | BS EN 61973 - HIGH VOLTAGE DIRECT CURRENT (HVDC) SUBSTATION AUDIBLE NOISE |
| IEEE C57.21 : 2008 | REQUIREMENTS, TERMINOLOGY, AND TEST CODE FOR SHUNT REACTORS RATED OVER 500 KVA |
| AHRI 230 : 2013 | SOUND INTENSITY TESTING PROCEDURES FOR DETERMINING SOUND POWER OF HVAC EQUIPMENT |
| ANSI S1.9 : 1996 | INSTRUMENTS FOR THE MEASUREMENT OF SOUND INTENSITY |
| MIL-STD-740 Revision B:1965 | AIRBORNE AND STRUCTURE BORNE NOISE MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| MIL-DTL-81963 Revision C:2011 | SERVOCOMPONENTS, PRECISION INSTRUMENT, ROTATING, COMMON REQUIREMENTS AND TESTS, GENERAL SPECIFICATION FOR |
| ASTM E 1686 : 2016 : REDLINE | Standard Guide for Applying Environmental Noise Measurement Methods and Criteria |
| IEEE DRAFT C57.16 : D10 AUG 95 | TERMINOLOGY AND TEST CODE FOR DRY-TYPE AIR-CORE SERIES CONNECTED REACTORS |
| ASTM E 2235 : 2004 : R2012 | Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods |
| ANSI S1.42 : 2001 : R2006 | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
| SAE J 1074 : 2014 | ENGINE SOUND LEVEL MEASUREMENT PROCEDURE |
| ANSI S3.36 : 2012 | SPECIFICATION FOR A MANIKIN FOR SIMULATED IN-SITU AIRBORNE ACOUSTIC MEASUREMENTS |
| AHAM AC2 : 2006 | METHOD FOR SOUND TESTING OF PORTABLE HOUSEHOLD ELECTRIC ROOM AIR CLEANERS STANDARD |
| IEEE DRAFT C57.12.91 : D3 2000 | DRAFT STANDARD TEST CODE FOR DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS |
| PD IEC/TS 61973:2012 | High voltage direct current (HVDC) substation audible noise |
| ANSI S12.43 : 1997 : R2007 | METHODS FOR MEASUREMENT OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS |
| ANSI S2.16 : 1997 : R2001 | VIBRATORY NOISE MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| ASTM E 3133 : 2018 | Standard Test Method for Laboratory Measurement of Floor Impact Sound Radiation Using the Tapping Machine |
| ANSI S12.18 : 1994 | PROCEDURES FOR OUTDOOR MEASUREMENT OF SOUND PRESSURE LEVEL |
| ANSI S12.65 : 2006 | RATING NOISE WITH RESPECT TO SPEECH INTERFERENCE |
| ANSI S1.13: 2005 | MEASUREMENT OF SOUND PRESSURE LEVELS IN AIR |
| ASTM E 1111/E1111M : 2014 : REDLINE | Standard Test Method for Measuring the Interzone Attenuation of Open Office Components |
| ASTM E 1222 : 1990 : R1996 : EDT 1 | Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
| ASTM E 2249 : 2002 : R2008 | Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity |
| ASTM E 1503 : 2014 : REDLINE | Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System |
| ASTM E 1574 : 1998 | Standard Test Method for Measurement of Sound in Residential Spaces |
| ASTM E 1130 : 2016 : REDLINE | Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index |
| ASTM E 2964 : 2014 : EDT 1 | Standard Test Method for Measurement of the Normalized Insertion Loss of Doors |
| ASTM E 2202 : 2002 : R2009 | Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards |
| ASTM E 2202 : 2002 | Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards |
| DEFSTAN 59-27(PT1)/2(1990) : 1990 | PRECISION INSTRUMENT, ROTATING, SERVOCOMPONENTS - GENERAL REQUIREMENTS AND COMMON TESTS FOR SERVOCOMPONENTS |
| DEFSTAN 61-14(PT1)/2(1990) : 1990 | PRECISION INSTRUMENT, ROTATING, SERVOCOMPONENTS - PART 1: GENERAL REQUIREMENTS AND COMMON TESTS FOR SERVOCOMPONENTS |
| MIL T 28800 : E | TEST EQUIPMENT FOR USE WITH ELECTRICAL AND ELECTRONIC EQUIPMENT GENERAL SPECIFICATION FOR |
| DEFSTAN 02-813/2(2009) : 2009 | REQUIREMENTS FOR STRUCTURE BORNE VIBRATION AND AIRBORNE NOISE TESTING OF WARSHIP EQUIPMENT |
| DEFSTAN 02-813/3(2016) : 2016 | REQUIREMENTS FOR STRUCTURE BORNE VIBRATION AND AIRBORNE NOISE TESTING OF WARSHIP EQUIPMENT |
| AHRI 270 : 2008 | SOUND PERFORMANCE RATING OF OUTDOOR UNITARY EQUIPMENT |
| MIL-M-9397 Revision E:1979 | FREQUENCY CONVERTER, MOBILE, TYPE MC-1A |
| ASTM E 2249 : 2002 | Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity |
| BS IEC/IEEE 62271-37-082:2012 | High-voltage switchgear and controlgear Standard practice for the measurement of sound pressure levels on alternating current circuit-breakers |
| AHRI 220 : 2014 | REVERBERATION ROOM QUALIFICATION AND TESTING PROCEDURES FOR DETERMINING SOUND POWER OF HVAC EQUIPMENT |
| AHRI 350 : 2000 | SOUND PERFORMANCE RATING OF NON-DUCTED INDOOR AIR-CONDITIONING AND HEAT PUMP EQUIPMENT |
| ASTM C 423 : 2017 : REDLINE | Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
| SAE ARP 1307 : 2013 | MEASUREMENT OF EXTERIOR NOISE PRODUCED BY AIRCRAFT AUXILIARY POWER UNITS (APUS) AND ASSOCIATED EQUIPMENT DURING GROUND OPERATION |
| SAE J 184 : 2014 | QUALIFYING A SOUND DATA ACQUISITION SYSTEM |
| MIL-DTL-38195 Revision D:2000 | Generator Set, Gas Turbine Engine, 60 KW 400 Hertz, General Purpose |
| ANSI S1.18 : 2010 | METHOD FOR DETERMINING THE ACOUSTIC IMPEDANCE OF GROUND SURFACES |
| AHRI 530 : 2005 | RATING OF SOUND AND VIBRATION FOR REFRIGERANT COMPRESSORS |
| SAE J 192 : 2013 | MAXIMUM EXTERIOR SOUND LEVEL FOR SNOWMOBILES |
| SAE J 1400 : 2017 | LABORATORY MEASUREMENT OF THE AIRBORNE SOUND BARRIER PERFORMANCE OF FLAT MATERIALS AND ASSEMBLIES |
| ASTM E 2179 : 2003 : R2016 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| SAE J1161 : 2017 | OPERATIONAL SOUND LEVEL MEASUREMENT PROCEDURE FOR SNOWMOBILES |
| AASHTO TP 76 : 2015 | METHOD OF TEST FOR MEASUREMENT OF TIRE/PAVEMENT NOISE USING THE ON-BOARD SOUND INTENSITY (OBSI) METHOD |
| AHRI 1140 : 2012 | SOUND QUALITY EVALUATION PROCEDURES FOR AIR-CONDITIONING AND REFRIGERATION EQUIPMENT |
| AHRI 1280 : 2014 | SOUND POWER RATING OF WATER-COOLED CHILLERS |
| ANSI S12.44 : 1997 : R2012 | METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL |
| SAE J 2846 : 2017 | LABORATORY MEASUREMENT OF THE ACOUSTICAL PERFORMANCE OF BODY CAVITY FILLER MATERIALS |
| ANSI S12.64-1 : 2009 | QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF UNDERWATER SOUND FROM SHIPS - PART 1: GENERAL REQUIREMENTS |
| ANSI S12.8 : 1998 : R2008 | METHODS FOR DETERMINING THE INSERTION LOSS OF OUTDOOR NOISE BARRIERS |
| ASTM E 492 : 2009 : R2016 : EDT 1 | Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine |
| ASTM E 1376 : 1990 : R1994 : EDT 2 | Standard Test Method for Measuring the Interzone Attenuation of Sound Reflected by Wall Finishes and Furniture Panels |
| ASTM E 2249 : 2002 : R2016 | Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity |
| ASTM E 90 : 2009 : R2016 | Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements |
| ASTM E 2638 : 2010 | Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room |
| ASTM E 1780 : 2012 : REDLINE | Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source |
| ASTM E 2235 : 2004 : EDT 1 | Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods |
| ASTM E 1222 : 1990 : R2002 | Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
| ASTM E 2638 : 2010 : R2017 | Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room |
| ASTM E 2179 : 2003 : EDT 1 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| ASTM E 492 : 2009 | Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine |
| NEMA SM 24-1991 (R1997, R2002) | LAND BASED STEAM TURBINE GENERATOR SETS 0 TO 33,000 kW |
| ASME B133.8 : 2011 | GAS TURBINE INSTALLATION SOUND EMISSIONS |
| ASME B133.8 : 2011 : R2017 | GAS TURBINE INSTALLATION SOUND EMISSIONS |
| NEMA SM 23-1991 (R1997, R2002) | STEAM TURBINES FOR MECHANICAL DRIVE SERVICE |
| ANSI S12.11 : 1987 | METHODS FOR THE MEASUREMENT OF NOISE EMITTED BY SMALL AIR-MOVING DEVICES |
| IEEE C57.16-2011 | IEEE Standard for Requirements, Terminology, and Test Code for Dry-Type Air-Core Series-Connected Reactors |
| ANSI S12.44 : 1997 | METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL |
| ANSI/ASA S1.1:2013 | ACOUSTICAL TERMINOLOGY |
| ANSI S3.14 : 0 | RATING NOISE WITH RESPECT TO SPEECH INTERFERENCE |
| IEEE 656-1992 | IEEE Standard for the Measurement of Audible Noise from Overhead Transmission Lines |
| ANSI S3.1 : 1999 : R2003 | MAXIMUM PERMISSIBLE AMBIENT NOISE LEVELS FOR AUDIOMETRIC TEST ROOMS |
| ANSI S2.16 : 1997 : R2006 | VIBRATORY NOISE MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| MIL-A-83216 Revision B:1976 | AIR CONDITIONER A/E32C-39 |
| ANSI S12.67 : 2008 | PRE-INSTALLATION AIRBORNE SOUND MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| ANSI S12.14 : 1992 : R2007 | METHODS FOR THE FIELD MEASUREMENT OF THE SOUND OUTPUT OF AUDIBLE PUBLIC WARNING DEVICES INSTALLED AT FIXED LOCATIONS OUTDOORS |
| MIL W 3459 : D | WIPER, WINDOW, ELECTRIC, PENDULUM TYPE (MARINE SERVICE, HEAVY DUTY) |
| MIL-STD-1789 Revision A:1988 | SOUND PRESSURE LEVELS IN AIRCRAFT (REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA ASD/ENES, WRIGHT-PATTERSON AFB OH 45433-6503 |
| ASTM E 1222 : 1990 : R2016 | Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
| ASTM E 2179 : 2003 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| MIL-STD-1294 Revision A:1985 | ACOUSTICAL NOISE LIMITS IN HELICOPTERS |
| ASTM E 2179 : 2003 : R2009 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| SAE J 2883 : 2015 | LABORATORY MEASUREMENT OF RANDOM INCIDENCE SOUND ABSORPTION TESTS USING A SMALL REVERBERATION ROOM |
| ASTM E 596 : 1996 : R2002 | Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures |
| AWS F6.1 : 78(R1988) | SOUND LEVEL MEASUREMENT OF MANUAL ARC WELDING AND CUTTING PROCESSES, METHOD FOR, |
| ASTM E 1050 : 2012 : REDLINE | Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System |
| ANSI S12.15 : 1992 : R2007 | FOR ACOUSTICS - PORTABLE ELECTRIC POWER TOOLS, STATIONARY AND FIXED ELECTRIC POWER TOOLS, AND GARDENING APPLIANCES - MEASUREMENT OF SOUND EMITTED |
| ANSI S12.64-1 : 2009 : R2014 | QUANTITIES AND PROCEDURES FOR DESCRIPTION AND MEASUREMENT OF UNDERWATER SOUND FROM SHIPS - PART 1: GENERAL REQUIREMENTS |
| ASTM E 596 : 1996 : R2016 | Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures |
| ASTM E 1375 : 1990 : R2002 | Standard Test Method for Measuring the Interzone Attenuation of Furniture Panels Used as Acoustical Barriers (Withdrawn 2005) |
| ASTM E 596 : 1996 : R2009 | Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures |
| ASTM E 596 : 1996 : R2002 : EDT 1 | Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures |
| ASTM E 90 : 2009 | Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements |
| ASTM E 2179 : 2003 : EDT 2 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| ASTM E 2202 : 2002 : R2016 | Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards |
| ANSI/ASA S12.58:2012 | SOUND POWER LEVEL DETERMINATION FOR SOURCES USING A SINGLE-SOURCE POSITION |
| IEC TS 61973:2012 | High voltage direct current (HVDC) substation audible noise |
| ASA/ANSI S12.44:1997(R2020) | METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL |
| ASHRAE HDBK REFRIGERATION : 2014 | ASHRAE HANDBOOK - REFRIGERATION |
| SAE AS 1426 : 1980 | STANDARD GALLEY SYSTEM SPECIFICATION, PART 1, PERFORMANCE, DESIGN DEVELOPMENT |
| ANSI S3.1 : 1999 : R2013 | MAXIMUM PERMISSIBLE AMBIENT NOISE LEVELS FOR AUDIOMETRIC TEST ROOMS |
| SAE ARP 1279 : 1985 | STANDARD INDOOR METHOD OF COLLECTION AND PRESENTATION OF THE BARE TURBOSHAFT ENGINE NOISE DATA FOR USE IN HELICOPTER INSTALLATIONS |
| MIL C 49175 : B | COOLER, CRYOGENIC, MECHANICAL HD-1033B/UA AND HD-1033C/UA |
| ANSI S2.17 : 0 | TECHNIQUES OF MACHINERY VIBRATION MEASUREMENT |
| ASHRAE 68 : 0 | LABORATORY METHOD OF TESTING TO DETERMINE THE SOUND POWER IN A DUCT |
| ANSI/ASA S12.65 : 2006(R2011) | RATING NOISE WITH RESPECT TO SPEECH INTERFERENCE |
| MIL-T-5422 Revision F:1971 | TESTING, ENVIRONMENTAL, AIRCRAFT ELECTRONIC EQUIPMENT |
| UFC 3-450-01 : 2003 | UNIFIED FACILITIES CRITERIA - NOISE AND VIBRATION CONTROL |
| IEEE 269-2010 REDLINE | IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets |
| ASTM E 1779 : 1996 : REV A : R2004 | Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements (Withdrawn 2012) |
| SMPTE ST 222 : 1987 | TELEVISION - CONTROL AND REVIEW ROOMS - MONITOR SYSTEM ELECTROACOUSTIC RESPONSE |
| ASTM E 2964 : 2014 | Standard Test Method for Measurement of the Normalized Insertion Loss of Doors |
| ASTM E 1376 : 1990 : R2002 | Standard Test Method for Measuring the Interzone Attenuation of Sound Reflected by Wall Finishes and Furniture Panels (Withdrawn 2005) |
| ANSI S1.42 : 2001 | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
| IEEE C57.12.91-2011 | IEEE Standard Test Code for Dry-Type Distribution and Power Transformers |
| ANSI S1.4 : 1983 | SPECIFICATION FOR SOUND LEVEL METERS |
| ANSI/ASA S2.16 : 1997(R2016) | VIBRATORY NOISE MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| ANSI/ASA S12.44 : 1997(R2017) | METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL |
| ANSI S12.76 : 2017 | METHODS FOR MEASUREMENT OF SUPERSONIC JET NOISE FROM UNINSTALLED MILITARY AIRCRAFT ENGINES |
| ANSI S2.70 : 2006 : R2011 | GUIDE FOR THE MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO VIBRATION TRANSMITTED TO THE HAND |
| ANSI/ASA S12.14 : 1992(R2012) | METHODS FOR THE FIELD MEASUREMENT OF THE SOUND OUTPUT OF AUDIBLE PUBLIC WARNING DEVICES INSTALLED AT FIXED LOCATIONS OUTDOORS |
| ANSI S12.43 : 1997 : R2012 | METHODS FOR MEASUREMENT OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS |
| ANSI/ASA S12.42 : 2010 | METHODS FOR THE MEASUREMENT OF INSERTION LOSS OF HEARING PROTECTION DEVICES IN CONTINUOUS OR IMPULSIVE NOISE USING MICROPHONE-IN-REAL-EAR OR ACOUSTIC TEST FIXTURE PROCEDURES |
| ANSI S1.42 : 2001(R2016) | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
| ARI 890 : 2001 | AIR DIFFUSERS AND AIR DIFFUSER ASSEMBLIES |
| ASTM E 1574 : 1998 : R2014 | Standard Test Method for Measurement of Sound in Residential Spaces |
| ASTM E 596 : 1996 | Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures |
| ATIS T1.505 : 89(R1998) | |
| ASTM E 2235 : 2004 | Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods |
| ANSI/ASA S12.58:2012(R2019) | SOUND POWER LEVEL DETERMINATION FOR SOURCES USING A SINGLE-SOURCE POSITION |
| AHRI 260 : 2001 | SOUND RATING OF DUCTED AIR MOVING AND CONDITIONING EQUIPMENT |
| IEEE DRAFT C57.12.90 : D5.1 98 | DRAFT STANDARD TEST CODE FOR LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS |
| MIL-STD-912 Base Document:1990 | PHYSICAL EAR NOISE ATTENUATION TESTING |
| ANSI S4.26 : 84(R1992) | LOUDSPEAKER COMPONENTS USED IN PROFESSIONAL AUDIO AND SOUND REINFORCEMENT |
| ANSI S3.1 : 1999 : R2008 | MAXIMUM PERMISSIBLE AMBIENT NOISE LEVELS FOR AUDIOMETRIC TEST ROOMS |
| ANSI/ASA S3.36:2012(R2018) | SPECIFICATION FOR A MANIKIN FOR SIMULATED IN-SITU AIRBORNE ACOUSTIC MEASUREMENTS |
| ANSI/ASA S12.15 : 1992(R2016) | FOR ACOUSTICS - PORTABLE ELECTRIC POWER TOOLS, STATIONARY AND FIXED ELECTRIC POWER TOOLS, AND GARDENING APPLIANCES - MEASUREMENT OF SOUND EMITTED |
| ASTM E 2963 : 2016 : REDLINE | Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments |
| AHRI 280 : 1995 | REQUIREMENTS FOR THE QUALIFICATION OF REVERBERATION ROOMS IN THE 63 HZ OCTAVE BAND |
| AHRI 250 : 2001 | PERFORMANCE AND CALIBRATION OF REFERENCE SOUND SOURCES |
| AHRI 370 : 2001 | SOUND PERFORMANCE RATING OF LARGE AIR-COOLED OUTDOOR REFRIGERATING AND AIR-CONDITIONING EQUIPMENT |
| IEEE 85-1973 | IEEE Test Procedure for Airborne Sound Measurements on Rotating Electric Machinery |
| AHRI 300 : 2000 | SOUND RATING AND SOUND TRANSMISSION LOSS OF PACKAGED TERMINAL EQUIPMENT |
| MIL-S-008806 Revision B:1970 | SOUND PRESSURE LEVELS IN AIRCRAFT, GENERAL SPECIFICATION FOR |
| ANSI S3.29 : 0 | GUIDE TO THE EVALUATION OF HUMAN EXPOSURE TO VIBRATION IN BUILDINGS |
| IEEE C37.082-1982 | IEEE Standard Methods for the Measurement of Sound Pressure Levels of AC Power Circuit Breakers |
| ANSI S2.70 : 2006(R2016) | GUIDE FOR THE MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO VIBRATION TRANSMITTED TO THE HAND |
| ANSI S1.42 : 2001 : R2011 | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
| ANSI S12.18 : 1994 : R2009 | PROCEDURES FOR OUTDOOR MEASUREMENT OF SOUND PRESSURE LEVEL |
| ANSI S2.71 : 1983 | GUIDE TO THE EVALUATION OF HUMAN EXPOSURE TO VIBRATION IN BUILDINGS |
| ANSI/ASA S1.42 : 2001(R2016) | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
| ANSI/ASA S3/SC1.100-2014 | METHODS TO DEFINE AND MEASURE THE RESIDUAL SOUND IN PROTECTED NATURAL AND QUIET RESIDENTIAL AREAS |
| ANSI/ASA S1.13 ED 5: 2005(R2010) | MEASUREMENT OF SOUND PRESSURE LEVELS IN AIR |
| ANSI S2.70:2006 | GUIDE FOR THE MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO VIBRATION TRANSMITTED TO THE HAND |
| ANSI/ASA S12.8 : 1998(R2013) | METHODS FOR DETERMINING THE INSERTION LOSS OF OUTDOOR NOISE BARRIERS |
| ANSI S2.16 : 1997 : R2011 | VIBRATORY NOISE MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| ANSI S12.44 : 1997 : R2007 | METHODS FOR CALCULATION OF SOUND EMITTED BY MACHINERY AND EQUIPMENT AT WORKSTATIONS AND OTHER SPECIFIED POSITIONS FROM SOUND POWER LEVEL |
| ASTM E 1574 : 1998 : R2006 | Standard Test Method for Measurement of Sound in Residential Spaces |
| ASHRAE 151 : 2010 | PRACTICES FOR MEASURING, TESTING, ADJUSTING, AND BALANCING SHIPBOARD HVAC&R SYSTEMS |
| ASTM E 1375 : 1990 : R1994 : EDT 1 | Standard Test Method for Measuring the Interzone Attenuation of Furniture Panels Used as Acoustical Barriers |
| ASTM E 1222 : 1990 : R2009 | Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
| ANSI S3.34:1986 | GUIDE FOR THE MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO VIBRATION TRANSMITTED TO THE HAND |
| ASTM E 1414/E1414M : 2016 : REDLINE | Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum |
| AHRI 1120 : 2012 | ACOUSTICAL TEST METHODS AND SOUND POWER RATING PROCEDURES FOR TRANSPORT REFRIGERATION EQUIPMENT |
| ASME PTC36 : 2004 : R2013 | PERFORMANCE TEST CODES - MEASUREMENT OF INDUSTRIAL SOUND |
| ASME PTC36 : 2004 | PERFORMANCE TEST CODES - MEASUREMENT OF INDUSTRIAL SOUND |
| ANSI/ASA S1.1:2013 | ACOUSTICAL TERMINOLOGY |
| ANSI S1.4 : 1983 | SPECIFICATION FOR SOUND LEVEL METERS |
| IEC 60050-801:1994 | International Electrotechnical Vocabulary (IEV) - Part 801: Acoustics and electroacoustics |
| ANSI/ASA S1.6 : 2016 | PREFERRED FREQUENCIES AND FILTER BAND CENTER FREQUENCIES FOR ACOUSTICAL MEASUREMENTS |
| ANSI S1.43 : 1997 | SPECIFICATIONS FOR INTEGRATING-AVERAGING SOUND LEVEL METERS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.