ANSI/NCSL Z540 1 : 94(R2002)
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
CALIBRATION - CALIBRATION LABORATORIES AND MEASURING AND TEST EQUIPMENT - GENERAL REQUIREMENTS
Superseded date
01-01-2007
Superseded by
Published date
01-12-2013
Sorry this product is not available in your region.
Describes a mechanism for promoting confidence in calibration laboratories and measuring and test equipment when it can be shown that they are operated in compliance with its requirements.
| DevelopmentNote |
Supersedes NCSL RP 4, RP 11 and MIL STD 45662 (06/2002) Handbook is also available for ANSI/NCSL Z540 1. (05/2003)
|
| DocumentType |
Standard
|
| PublisherName |
National Conference of Standards Laboratories
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM D 7392 : 2007 | Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants |
| DSCC 04028 : 0 | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 452 CONTACT POSITIONS |
| 07/30172770 DC : 0 | BS ISO 10428 - PETROLEUM AND NATURAL GAS INDUSTRIES DOWNHOLE EQUIPMENT - DOWNHOLE EQUIPMENT - SUCKER RODS, COUPLINGS AND ANCILLARY EQUIPMENT |
| MIL E 5589 : D | EARPHONE, (EXTENDED RANGE), H-301/U |
| NASA PRC 6001 : 2010 | PROCESS SPECIFICATION FOR THE MANUFACTURE OF COMPOSITE LAMINATE PREPREG PARTS |
| DSCC 85136 : E | HEAT SINKS, ELECTRICAL-ELECTRONIC COMPONENT, FIN STOCK, ALUMINIUM ALLOY |
| IEEE 1302-2008 | IEEE Guide for the Electromagnetic Characterization of Conductive Gaskets in the Frequency Range of DC to 18 GHz |
| SAE AS 81914 : 2016 | TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
| MIL PRF 25879 : D | SWITCH, RADIO FREQUENCY TRANSMISSION LINE, COAXIAL TYPE SA-521A/A AND MOUNTING MT-1995/A |
| IEEE DRAFT 1309 : D2.0 2005 | CALIBRATION OF ELECTROMAGNETIC FIELD SENSORS AND PROBES, EXCLUDING ANTENNAS, FROM 9 KHZ TO 40 GHZ |
| 08/30168345 DC : DRAFT JULY 2008 | BS ISO 15136-1 - DOWNHOLE EQUIPMENT FOR PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
| MIL-DTL-13623 Revision E:2010 | SWITCH, ROTARY: 28 VOLT DC |
| MIL R 23285 : B | RESISTOR, VARIABLE, NONWIRE WOUND GENERAL SPECIFICATION FOR |
| MIL-R-39008 Revision C:1990 | RESISTOR, FIXED, COMPOSITION (INSULATED), ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR |
| CSA C392 : 2011 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
| API 19G2 : 2010 | FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| AECTP-500 : 2016 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION |
| MIL D 83531 : A (3) | DELAY LINES, PASSIVE |
| CSA C392 : 2011 : INC : UPD 2 : 2012 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
| MIL-DTL-55446 Revision D:2011 | CABLES, TELEPHONE, SWITCHBOARD: PLASTIC INSULATED, PLASTIC JACKETED |
| MIL-DTL-81581-8 Revision A:2006 | HOSE ASSEMBLIES, CABLE ASSEMBLIES, COMMUNICATION, ASSOCIATED |
| NASM 1312-8 : 2001 | FASTENER TEST METHODS, METHOD 8, TENSILE STRENGTH |
| API 11B : 2010 | SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
| ASTM E 2623 : 2014 : REDLINE | Standard Practice for Reporting Thermometer Calibrations |
| AWS C3.5 : 1999 | SPECIFICATION FOR INDUCTION BRAZING |
| DSCC 93002 : B | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 372 CONTACT POSITIONS |
| NASM1312-13 : 2003 | FASTENER TEST METHODS - METHOD 13 - DOUBLE SHEAR TEST |
| IEEE C37.241-2017 | IEEE Guide for Application of Optical Instrument Transformers for Protective Relaying |
| SAE ARP 5543 : 2015 | AIRCRAFT WHEEL INFLATION VALVES INCORPORATING AN INFLATION PRESSURE GAUGE |
| NASA-STD-8739.12:2018 | METROLOGY & CALIBRATION |
| ASTM F 1476 : 2007 : R2013 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
| ASTM F 2332 : 2006 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| API 14L CHINESE : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| ASTM F 1476 : 2007 | Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications |
| MIL-PRF-83504 Revision C:2005 | SWITCHES, DUAL IN-LINE PACKAGE (DIP), GENERAL SPECIFICATION FOR |
| MIL-C-11272 Revision E:2008 | CAPACITORS, FIXED, GLASS DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL C 55629 : B | CIRCUIT BREAKERS, MAGNETIC, UNSEALED, TRIP-FREE, SINGLE POLE, FRONT MOUNTED, AUXILIARY CONTACTS (1 TO 100 AMPERES) |
| MIL C 39019 : C | CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, GENERAL SPECIFICATION FOR |
| MIL P 50884 : E | PRINTED WIRING BOARD, FLEXIBLE OR RIGID-FLEX, GENERAL SPECIFICATION FOR |
| MIL-PRF-71226 Base Document:1996 | ARMAMENTS AND MUNITIONS, STANDARD PROVISIONS, GENERAL SPECIFICATION FOR |
| IPC WHMA A 620 HUNGARIAN : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC J STD 004 RUSSIAN : B | REQUIREMENTS FOR SOLDERING FLUXES |
| MIL-DTL-13253 Revision E:2007 | HANDSETS, GENERAL SPECIFICATION FOR |
| MIL F 19207 : D (1) SUPP 1 | FUSEHOLDER, EXTRACTOR POST TYPE, BLOWN FUSE INDICATING AND NONINDICATING GENERAL SPECIFICATION FOR |
| MIL PRF 83513 : D | CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR |
| IPC WHMA A 620 TURKISH : B2012 AMD 1 2013 | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC WHMA A 620 HEBREW : B2012 AMD 1 2013 | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC WHMA A 620 SPANISH : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC WHMA A 620 CHINESE : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| MIL S 83731 : A | SWITCH, TOGGLE, UNSEALED AND SEALED TOGGLE, GENERAL SPECIFICATION FOR |
| IPC WHMA A 620 VIETNAMESE : B2012 | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC 4411 : A | SPECIFICATION AND CHARACTERIZATION METHODS FOR NONWOVEN PARA-ARAMID REINFORCEMENT |
| IPC 4204 CHINESE : A2011 AMD 1 2013 | FLEXIBLE METAL-CLAD DIELECTRICS FOR USE IN FABRICATION OF FLEXIBLE PRINTED CIRCUITRY |
| MIL-DTL-3965 Revision H:2004 | CAPACITOR, FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, GENERAL SPECIFICATION FOR |
| MIL-DTL-53126 Revision A:2012 | Power Distribution, Illumination Systems, Electrical General Specification for |
| IPC J STD 004 CHINESE : B | REQUIREMENTS FOR SOLDERING FLUXES |
| MIL S 3786 : F | SWITCH, ROTARY, CLOSED CONSTRUCTION, 2 AMPERES, LOW LEVEL, POSITIVE SHAFT GROUNDING STYLE SR04 |
| IPC WHMA A 620 POLISH : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC 4204 : A | FLEXIBLE METAL-CLAD DIELECTRICS FOR USE IN FABRICATION OF FLEXIBLE PRINTED CIRCUITRY |
| IPC 4202 CHINESE : A | FLEXIBLE BASE DIELECTRICS FOR USE IN FLEXIBLE PRINTED CIRCUITRY |
| IEEE/ANSI C63.4-2014 | American National Standard for Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz |
| MIL-DTL-32496 Base Document:2014 | GENERATOR SETS, SKID MOUNTED, TRAILER MOUNTED ADVANCED MEDIUM-SIZED MOBILE POWER SOURCES, TACTICAL DIESEL FUEL DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR |
| IPC 4101 CHINESE : C2009 | SPECIFICATION FOR BASE MATERIALS FOR RIGID AND MULTILAYER PRINTED BOARDS |
| MIL-DTL-5589 Revision E:1999 | EARPHONE, (EXTENDED RANGE), H-301/U |
| IPC 4101 GERMAN : C | SPECIFICATION FOR BASE MATERIALS FOR RIGID AND MULTILAYER PRINTED BOARDS |
| IPC WHMA A 620 ESTONIAN : B2012 AMD 1 2013 | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| IPC WHMA A 620 KOREAN : B2012 AMD 1 2013 | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| 08/30166039 DC : DRAFT JUNE 2008 | BS ISO 17824 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SAND-CONTROL SCREENS |
| MIL-F-18327 Revision F:2008 | FILTERS; HIGH PASS, LOW PASS, BAND PASS, BAND SUPPRESSION, AND DUAL FUNCTIONING, GENERAL SPECIFICATION FOR |
| AWS D10.10/D10.10M : 1999 : R2009 | RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING |
| DSCC 02007 : A | CONNECTOR, HIGH DENSITY, BLADE AND FORK, BACKPANEL, EIGHT ROW, 396 CONTACT POSITIONS |
| SAE ARP 5796 : 2013 | FLIGHT CRITICAL CONTROL VALVES, MILITARY AIRCRAFT |
| 11/30238890 DC : 0 | BS EN ISO 14998 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWN HOLE EQUIPMENT - COMPLETION ACCESSORIES |
| MIL-DTL-26518 Revision C:2000 | CONNECTORS, ELECTRICAL, MINIATURE, RACK AND PANEL, ENVIRONMENT RESISTANT, 200 DEGREES C AMBIENT TEMPERATURE - GENERAL SPECIFICATION FOR |
| MIL R 27208 : D | RESISTOR, VARIABLE, WIRE-WOUND, NONPRECISION, GENERAL SPECIFICATION FOR |
| MIL F 28861 : B | FILTER AND CAPACITOR, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR |
| CSA C392 : 2011 : INC : UPD 1 : 2011 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
| ZZ-H-617 Revision C:2002 | Hose, Rubber, Windshield Wiper |
| MIL PRF 62186 : A | GENERATOR, ALTERNATING CURRENT (650 AMPERE RECTIFIED), 28 VOLTS DIRECT CURRENT (OIL COOLED) |
| MIL-PRF-62565 Revision B:1997 | AIR CLEANER, ENGINE |
| DSCC 04027 : A | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROWS, 452 CONTACT POSITIONS |
| MIL L 7808 : K (1) | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| DD IEC/PAS 61249-6-3:2011 | Specification for finished fabric woven from “E?? glass for printed boards |
| MIL-H-87111 Revision A:1984 | HEAT SINKS, SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR |
| SAE AS 1356 : 2012 | LIFE RAFTS |
| ASTM E 1417/E1417M : 2016 : REDLINE | Standard Practice for Liquid Penetrant Testing |
| MIL-DTL-55330 Revision C:2001 | CONNECTORS, ELECTRICAL AND FIBER OPTIC, PACKAGING OF |
| MIL R 94 : E | RESISTORS, VARIABLE, COMPOSITION, GENERAL SPECIFICATION FOR |
| SAE AS 5768 : 2013 | TOOL, STRIPPER, ELECTRICAL INSULATION, GENERAL SPECIFICATION FOR |
| SAE AS 7928 : 2011 | TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
| SAE AS 81659 : 2017 | CONNECTORS, ELECTRICAL, RECTANGULAR CRIMP CONTACTS, GENERAL SPECIFICATION FOR |
| SAE AS 21608 : 2012 | FERRULE, SHIELD TERMINATING, CRIMP STYLE |
| SAE AS 85028 : 2017 | CONNECTOR, ELECTRICAL, RECTANGULAR, INDIVIDUAL CONTACT SEALING, POLARIZED CENTER JACKSCREW, GENERAL SPECIFICATION FOR |
| API 19G1 : 2010 | SIDE-POCKET MANDRELS |
| ASTM F 1548 : 2001 | Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ASTM F 1548 : 2001 : R2012 | Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ASTM D 6216 : 2012 : REDLINE | Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications |
| IEC PAS 61249-6-3:2011 | Specification for finished fabric woven from "E" glass for printed boards |
| IEC PAS 62213:2001 | Specification and characterization methods for nonwoven para-aramid reinforcement |
| MIL-DTL-5015 Revision H:2000 | CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE - GENERAL SPECIFICATION FOR |
| MIL-G-18997 Revision E:1991 | GAUGE, PRESSURE, DIAL INDICATING |
| I.S. EN ISO 10432:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| IPC WHMA A 620 DANISH : B | REQUIREMENTS AND ACCEPTANCE FOR CABLE AND WIRE HARNESS ASSEMBLIES |
| I.S. EN ISO 16070:2006 | PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - LOCK MANDRELS AND LANDING NIPPLES |
| AWS D10.10/D10.10M : 1999 | RECOMMENDED PRACTICES FOR LOCAL HEATING OF WELDS IN PIPING AND TUBING |
| NAVSEA T9074 BD GIB 010/0300 : 0 | BASE MATERIALS FOR CRITICAL APPLICATIONS: REQUIREMENTS FOR LOW ALLOY STEEL PLATE, FORGINGS, CASTINGS, SHAPES, BARS, AND HEADS OF HY-80/100/130 AND HSLA-80/100 |
| SAE AS 5649 : 2012 | WIRE AND CABLE MARKING PROCESS, UV LASER |
| API 19G1 CHINESE : 2010 | SIDE-POCKET MANDRELS |
| MIL-STD-1537 Revision C:2002 | Electrical Conductivity Test for Verification of Heat Treatment of Aluminum Alloys, Eddy Current Method |
| SAE AS 7108 : 2009 | NADCAP AUDIT CRITERIA FOR CHEMICAL PROCESSING |
| MIL-DTL-32234 Base Document:2007 | CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR |
| AECTP-100 : 2016 | ENVIRONMENTAL GUIDELINES FOR DEFENCE MATERIEL |
| MIL-DTL-8777 Revision F:2011 | WIRE, ELECTRICAL, SILICONE-INSULATED, COPPER, 600-VOLT, 200 DEGREES C |
| MIL S 22710 : E | SWITCHES, ROTARY (PRINTED CIRCUIT), (THUMBWHEEL, INLINE, AND PUSHBUTTON), GENERAL SPECIFICATION FOR |
| MIL-DTL-12520 Revision D:2005 | Connectors, Plug and Receptacle (Electrical, Waterproof), and Accessories; General Specification for |
| MIL F 15160 : G | FUSE, INSTRUMENT, POWER, AND TELEPHONE, GENERAL SPECIFICATION FOR |
| MIL-S-13949 Revision H:1993 | SHEET, PRINTED WIRING BOARD, GENERAL SPECIFICATION FOR |
| MIL-DTL-55353 Revision A:1999 | HEADSET, ELECTRICAL, H-216 A/U |
| MIL-H-10056 Revision F:1995 | HOLDERS (ENCLOSURES), CRYSTAL, GENERAL SPECIFICATION FOR |
| SAE MA 5405 : 2018 | SPLICES, FIBER OPTICS, FOR AEROSPACE INTER-CONNECTION SYSTEMS |
| CSA C392 : 2011 : R2016 | TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
| SAE AS 29606 : 2014 | WIRE, ELECTRICAL, STRANDED, UNINSULATED COPPER, COPPER ALLOY, OR ALUMINUM, OR THERMOCOUPLE EXTENSION, GENERAL SPECIFICATION FOR |
| SAE ARP 5448/5 : 2016 | PLAIN BEARING NO-LOAD ROTATIONAL BREAKAWAY TORQUE MEASUREMENT |
| NASA PRC 6002 : 2007 | PROCESS SPECIFICATION FOR THE ASSEMBLY OF COMPOSITE SANDWICH STRUCTURES |
| SAE AS 58091 : 2012 | CIRCUIT BREAKERS, TRIP-FREE, AIRCRAFT, GENERAL SPECIFICATION FOR |
| ISO 10432:2004 | Petroleum and natural gas industries Downhole equipment Subsurface safety valve equipment |
| SAE ARP 5448/1 : 2016 | PLAIN BEARING RADIAL LIMIT AND ULTIMATE LOAD TESTS |
| SAE ARP 5542 : 2012 | HAND HELD AIRCRAFT TIRE INFLATION PRESSURE GAUGES |
| SAE ARP 5416 : 2013 | AIRCRAFT LIGHTNING TEST METHODS |
| EIA IS 648 : 1996 | MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF EQUIPMENT INTENDED TO OPERATE IN SEVERE ELECTROMAGNETIC ENVIRONMENTS |
| NASA PRC 6003 : 2007 | PROCESS SPECIFICATION FOR THE TRIMMING AND DRILLING OF COMPOSITES |
| SAE AS 7109 : 2009 | NADCAP REQUIREMENTS FOR COATINGS |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| SAE AS 18280 : 2017 | FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
| ASTM F 1548 : 2001 : R2006 | Standard Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications |
| ISO/TR 10305-2:2003 | Road vehicles — Calibration of electromagnetic field strength measuring devices — Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz |
| BS EN ISO 17078-2:2007 | Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels |
| NASA PRC 4002 : 2010 | PROCESS SPECIFICATION FOR THE APPLICATION OF THERMAL AND CORROSION CONTROL PAINTS AND COATINGS |
| NASA STD 8739.3 : 1998 | SOLDERED ELECTRICAL CONNECTIONS |
| GEIA STD 0006 : 2008 | REQUIREMENTS FOR USING ROBOTIC HOT SOLDER DIP TO REPLACE THE FINISH ON ELECTRONIC PIECE PARTS |
| NASA HDBK 8739.19-2 : 2010 | MEASURING AND TEST EQUIPMENT SPECIFICATIONS - NASA MEASUREMENT QUALITY ASSURANCE HANDBOOK - ANNEX 2 |
| NASA HDBK 8739.19-4 : 2010 | ESTIMATION AND EVALUATION OF MEASUREMENT DECISION RISK - NASA MEASUREMENT QUALITY ASSURANCE HANDBOOK - ANNEX 4 |
| NASA STD 8739.2 : 1999 | WORKMANSHIP STANDARD FOR SURFACE MOUNT TECHNOLOGY |
| UNI EN ISO 17078-2 : 2009 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
| UNI EN ISO 17078-1 : 2010 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| IPC 4562 : A | METAL FOIL FOR PRINTED BOARD APPLICATIONS |
| EN ISO 10432:2004 | Petroleum and natural gas industries - Downhole equipment - Subsurface safety valve equipment (ISO 10432:2004) |
| SAE AS 5830 : 2017 | COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF-BONDING, PROCUREMENT SPECIFICATION |
| MIL-DTL-24403-1 Revision F:2008 | ELECTRODES - WELDING, FLUX CORED, ORDINARY STRENGTH AND LOW ALLOY STEEL |
| MIL-DTL-71172 Revision B:2005 | CYLINDER, RECUPERATOR, RECOIL, M119A1/A2 HOWITZER LIGHT, TOWED: 105 MM |
| BS EN ISO 15551-1:2015 | Petroleum and natural gas industries. Drilling and production equipment Electric submersible pump systems for artificial lift |
| MIL R 23648 : E | RESISTOR, THERMAL (THERMISTOR) INSULATED, GENERAL SPECIFICATION FOR |
| MIL-HDBK-2164 Revision A:1996 | ENVIRONMENTAL STRESS SCREENING PROCESS FOR ELECTRONIC EQUIPMENT |
| API SPEC 11B CHINESE : 2010 | SPECIFICATION FOR SUCKER RODS, POLISHED RODS AND LINERS, COUPLINGS, SINKER BARS, POLISHED ROD CLAMPS, STUFFING BOXES, AND PUMPING TEES |
| MIL-PRF-87217 Revision A:1999 | CAPACITORS, FIXED, SUPERMETALLIZED PLASTIC FILM DIELECTRIC, DIRECT CURRENT FOR LOW ENERGY, HIGH IMPEDANCE APPLICATIONS, HERMETICALLY SEALED IN METAL CASES, HIGH RELIABILITY, GENERAL SPECIFICATION FOR |
| MIL-DTL-22200-1 Revision H:2008 | ELECTRODES, WELDING, MINERAL COVERED, IRON-POWDER, LOW-HYDROGEN MEDIUM AND HIGH TENSILE STEEL, AS-WELDED OR STRESS-RELIEVED WELD APPLICATION |
| MIL R 39007 : G (3) SUPP 1A | RESISTORS, FIXED, WIRE-WOUND (POWER TYPE), NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR |
| MIL PRF 62422 : B | FILTER, LASER HAZARD PROTECTION |
| MIL R 22097 : G | RESISTORS, VARIABLE, NONWIRE-WOUND (ADJUSTMENT TYPE), GENERAL SPECIFICATION FOR |
| DSCC 03023 : A | CONNECTOR, HIGH DENSITY, BLADE AND FORK, DAUGHTER BOARD, EIGHT ROW, 396 CONTACT POSITIONS |
| MIL L 12632 : D | LOUDSPEAKER, PERMANENT MAGNET (ENCASED, 2 WATT, FUNGUS, GUNBLAST, AND IMMERSION RESISTANT), GENERAL SPECIFICATION FOR |
| MIL R 22684 : D | RESISTOR, FIXED, FILM, INSULATED, GENERAL SPECIFICATION FOR |
| MIL-DTL-3849 Revision C:2005 | CORD, ELECTRICAL (TINSEL) |
| MIL C 15305 : E | COIL, FIXED AND VARIABLE, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| MIL S 83505 : B | SOCKET, (LEAD ELECTRONIC COMPONENTS) GENERAL SPECIFICATION FOR |
| 13/30217541 DC : 0 | BS EN ISO 15551-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT |
| MIL F 23419 : E | FUSE, CARTRIDGE, INSTRUMENT TYPE, GENERAL SPECIFICATION FOR |
| 09/30154810 DC : 0 | BS EN ISO 28781 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - SUBSURFACE VALVES AND RELATED EQUIPMENT |
| AWS C3.11M/C3.11:2011 | SPECIFICATION FOR TORCH SOLDERING |
| ASTM D 2632 : 2015 : REDLINE | Standard Test Method for Rubber Property—Resilience by Vertical Rebound |
| MIL PRF 12883 : E | SOCKETS AND ACCESSORIES FOR PLUG-IN ELECTRONIC COMPONENTS, GENERAL SPECIFICATION FOR |
| QQ-W-343 Revision G:1997 | WIRE, ELECTRICAL, COPPER (UNINSULATED) |
| MIL-DTL-49104 Revision C:2011 | CABLE, TELEPHONE WD-1A/TT (FIELD WIRE, PARALLEL PAIR) |
| MIL-PRF-62122 Revision E:2011 | CABLE ASSEMBLY, INTER-VEHICLE POWER: PLUG, RECEPTACLE, AND ADAPTER |
| API 7NRV CHINESE : 2006 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
| API SPEC 14L : 2007 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| SAE AS 81969 : 2016 | INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, GENERAL SPECIFICATION FOR |
| API 14A RUSSIAN : 2001 | SPECIFICATION FOR SUBSURFACE SAFETY VALVE EQUIPMENT |
| CSA C837 : 2016 | MONITORING AND ENERGY PERFORMANCE MEASUREMENTS OF COMPRESSED AIR SYSTEMS |
| SAE AS 42701 : 2014 | VALIDATION METHODS FOR MIL-STD-1760D MISSION STORES |
| SAE AS 6019 : 2012 | ARC FAULT CIRCUIT BREAKER (AFCB), AIRCRAFT, TRIP-FREE 28 VDC |
| AWS C3.9M/C3.9 : 2009 | SPECIFICATION FOR RESISTANCE BRAZING |
| IEEE 475-2000 | IEEE Standard Measurement Procedure for Field Disturbance Sensors 300 MHz to 40 GHz |
| I.S. EN ISO 15551-1:2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: ELECTRIC SUBMERSIBLE PUMP SYSTEMS FOR ARTIFICIAL LIFT (ISO 15551-1:2015) |
| SAE AS 81714 : 2014 | TERMINAL JUNCTION SYSTEM (TJS), ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR |
| CSA C391 : 2015 | TESTING OF THREE-PHASE SYNCHRONOUS MACHINES DURING REFURBISHMENT |
| ASTM F 2332 : 2006 : R2013 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| BS EN ISO 10432:2004 | Petroleum and natural gas industries. Downhole equipment. Subsurface safety valve equipment |
| ISO 15551-1:2015 | Petroleum and natural gas industries — Drilling and production equipment — Part 1: Electric submersible pump systems for artificial lift |
| ISO 16070:2005 | Petroleum and natural gas industries Downhole equipment Lock mandrels and landing nipples |
| ISO 17078-2:2007 | Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels |
| BS EN ISO 10417:2004 | Petroleum and natural gas industries. Subsurface safety valve systems. Design, installation, operation and redress |
| BS EN ISO 16070:2005 | Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples |
| ISO 10417:2004 | Petroleum and natural gas industries Subsurface safety valve systems Design, installation, operation and redress |
| BS EN ISO 17078-1 : 2004 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| ISO 17078-1:2004 | Petroleum and natural gas industries — Drilling and production equipment — Part 1: Side-pocket mandrels |
| IPC J STD 004 : B | REQUIREMENTS FOR SOLDERING FLUXES |
| EN ISO 16070:2005 | Petroleum and natural gas industries - Downhole equipment - Lock mandrels and landing nipples (ISO 16070:2005) |
| EN ISO 10417:2004 | Petroleum and natural gas industries - Subsurface safety valve systems - Design, installation, operation and redress (ISO 10417:2004) |
| EN ISO 15551-1:2015 | Petroleum and natural gas industries - Drilling and production equipment - Part 1: Electric submersible pump systems for artificial lift (ISO 15551-1:2015) |
| SAE ARP 5448/9 : 2007 | PLAIN BEARING LINED INSIDE DIAMETER PLUG GAGING |
| SAE AS 5372 : 2015 | FUSE, CURRENT LIMITER TYPE, AIRCRAFT |
| 08/30146353 DC : DRAFT MAR 2008 | BS EN ISO 17078-4 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 4: PRACTICES FOR SIDE-POCKET MANDRELS AND RELATED EQUIPMENT |
| API 14L : 2007 : R2012 | SPECIFICATION FOR LOCK MANDRELS AND LANDING NIPPLES |
| 03/311760 DC : DRAFT JULY 2003 | ISO 10432 - PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - SUBSURFACE SAFETY VALVE EQUIPMENT |
| SAE AS 81582 : 2017 | CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
| SAE AS 29600 : 2017 | CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, COMPOSITE, HIGH DENSITY, QUICK COUPLING, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS ASSOCIATED HARDWARE, GENERAL SPECIFICATION FOR |
| SAE AS 5258 : 2012 | INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, CONNECTOR AND CABLE ACCESSORY, SEALING STRAIN RELIEF, GENERAL SPECIFICATION FOR |
| MIL-DTL-24416 Revision C:2006 | Extinguishing System, Fire, Fixed, Wet Chemical |
| API 14B RUSSIAN : 2005 | DESIGN, INSTALLATION, REPAIR AND OPERATION OF SUBSURFACE SAFETY VALVE SYSTEMS |
| SAE AS 5259 : 2013 | CRIMPING TOOL AND ACCESSORIES, ELECTRICAL, SIZE 8 TO 700 KCMIL, GENERAL PURPOSE USE, DIE AND DIELESS |
| API 7NRV : 2006 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
| API 7NRV : 2006 : R2012 | SPECIFICATION FOR DRILL STRING NON-RETURN VALVES |
| SAE AS 40401 : 2013 | SOLENOID, ELECTRICAL, GENERAL SPECIFICATION FOR |
| IEEE/ANSI C63.23-2012 | American National Standard Guide for Electromagnetic Compatibility—Computations and Treatment of Measurement Uncertainty |
| IEEE 1502-2007 | IEEE Recommended Practice for Radar Cross-Section Test Procedures |
| IPC 4562 CHINESE : A | METAL FOIL FOR PRINTED BOARD APPLICATIONS |
| ASTM D 7392 : 2007 : R2013 | Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants |
| 13/30295424 DC : 0 | BS IEC/PAS 61249-8-1 ED.1 - QUALIFICATION AND PERFORMANCE OF ELECTRICAL INSULATING COMPOUND FOR PRINTED WIRING ASSEMBLIES |
| DSCC 99002 : A | TRANSFORMER, SWITCHING |
| I.S. EN ISO 17078-1:2005 | PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 1: SIDE-POCKET MANDRELS |
| NAVSEA T9074 AS GIB 010/271 : 0 | REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS |
| SAE AS 22520 : 2011 | CRIMPING TOOLS, WIRE TERMINATION, GENERAL SPECIFICATION FOR |
| ASME B89.4.19 : 2006 | PERFORMANCE EVALUATION OF LASER-BASED SPHERICAL COORDINATE MEASUREMENT SYSTEMS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.