ANSI/ASA S1.6 : 2016
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PREFERRED FREQUENCIES AND FILTER BAND CENTER FREQUENCIES FOR ACOUSTICAL MEASUREMENTS
Available format(s)
Hardcopy , PDF
Superseded date
06-02-2020
Superseded by
Language(s)
English
Published date
08-15-2016
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 Scope
2 Normative references
3 Terms and definitions
4 Preferred Frequencies
5 Filter Band Center Frequencies
For certain acoustical measurements, a constant-frequency increment is a suitable spacing.
| Committee |
S1
|
| DocumentType |
Standard
|
| Pages |
18
|
| PublisherName |
Acoustical Society of America
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| ASTM E 1222 : 1990 : R2016 | Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
| ANSI S1.43 : 1997 | SPECIFICATIONS FOR INTEGRATING-AVERAGING SOUND LEVEL METERS |
| AHRI 230 : 2013 | SOUND INTENSITY TESTING PROCEDURES FOR DETERMINING SOUND POWER OF HVAC EQUIPMENT |
| MIL-A-26846 Revision B:1984 | AIR CONDITIONER, A/M32C-4, TRAILER MOUNTED, VAPOR CYCLE, ELECTRIC, MOTOR DRIVEN |
| ANSI S1.9 : 1996 | INSTRUMENTS FOR THE MEASUREMENT OF SOUND INTENSITY |
| MIL-STD-1908 Base Document:1992 | DEFINITION OF HUMAN FACTOR TERMS (METRIC) |
| MIL-STD-740 Revision B:1965 | AIRBORNE AND STRUCTURE BORNE NOISE MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| MIL-HDBK-1908 Revision B:1999 | Definitions of Human Factors Terms |
| ASTM E 90 : 2009 : R2016 | Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements |
| ASTM E 1222 : 1990 : R2009 | Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
| ANSI S1.42 : 2001 : R2006 | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
| ANSI S2.16 : 1997 : R2001 | VIBRATORY NOISE MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| ANSI/ASA S3.22:2014 | SPECIFICATION OF HEARING AID CHARACTERISTICS |
| ANSI S3.47 : 2014 | SPECIFICATION OF PERFORMANCE MEASUREMENT OF HEARING ASSISTANCE DEVICES/SYSTEMS |
| ASTM E 1130 : 2016 : REDLINE | Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index |
| ANSI S12-2 : 2008 | CRITERIA FOR EVALUATING ROOM NOISE |
| 15/30274135 DC : 0 | BS ISO 18405 - UNDERWATER ACOUSTICS - TERMINOLOGY |
| AHRI 220 : 2014 | REVERBERATION ROOM QUALIFICATION AND TESTING PROCEDURES FOR DETERMINING SOUND POWER OF HVAC EQUIPMENT |
| MIL-A-26624 Revision B:1981 | AIR CONDITIONER, A/M32C-5, TRAILER MOUNTED, VAPOR CYCLE, ELECTRIC MOTOR DRIVEN |
| ANSI/ASA S1.8 : 2016 | REFERENCE VALUES FOR LEVELS USED IN ACOUSTICS AND VIBRATIONS |
| MIL M 23813 : A | MICROPHONES, INTERCOMMUNICATION AND ANNOUNCING SYSTEMS, NAVAL SHIPBOARD |
| ASTM E 2179 : 2003 : R2016 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| ANSI/ASA S12.15 : 1992(R2016) | FOR ACOUSTICS - PORTABLE ELECTRIC POWER TOOLS, STATIONARY AND FIXED ELECTRIC POWER TOOLS, AND GARDENING APPLIANCES - MEASUREMENT OF SOUND EMITTED |
| SAE AIR 1826 : 2016 | ACOUSTICAL CONSIDERATIONS FOR AIRCRAFT ENVIRONMENTAL CONTROL SYSTEM DESIGN |
| ISO 18405:2017 | Underwater acoustics — Terminology |
| ANSI S4.3 : 82(R1992) | WEIGHTED PEAK FLUTTER OF SOUND RECORDING AND REPRODUCING EQUIPMENT, METHOD FOR MEASUREMENT OF |
| ASTM E 1376 : 1990 : R1994 : EDT 2 | Standard Test Method for Measuring the Interzone Attenuation of Sound Reflected by Wall Finishes and Furniture Panels |
| ASTM E 2235 : 2004 : EDT 1 | Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods |
| ASTM E 1222 : 1990 : R2002 | Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
| ASTM C 384 : 2004 : R2011 | Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method |
| ASTM E 2179 : 2003 : EDT 1 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| ANSI S12.11 : 1987 | METHODS FOR THE MEASUREMENT OF NOISE EMITTED BY SMALL AIR-MOVING DEVICES |
| ASTM C 423 : 2017 : REDLINE | Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method |
| IEEE 656-1992 | IEEE Standard for the Measurement of Audible Noise from Overhead Transmission Lines |
| ANSI S3.1 : 1999 : R2003 | MAXIMUM PERMISSIBLE AMBIENT NOISE LEVELS FOR AUDIOMETRIC TEST ROOMS |
| ANSI S2.16 : 1997 : R2006 | VIBRATORY NOISE MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| ASTM E 1222 : 1990 : R1996 : EDT 1 | Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems |
| ASTM C 384 : 2004 : R2016 | Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method |
| ASTM E 1111/E1111M : 2014 : REDLINE | Standard Test Method for Measuring the Interzone Attenuation of Open Office Components |
| ASTM E 2179 : 2003 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| ASTM C 384 : 2004 | Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method |
| ASTM E 2179 : 2003 : R2009 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| ANSI S12.15 : 1992 : R2007 | FOR ACOUSTICS - PORTABLE ELECTRIC POWER TOOLS, STATIONARY AND FIXED ELECTRIC POWER TOOLS, AND GARDENING APPLIANCES - MEASUREMENT OF SOUND EMITTED |
| ASTM E 1375 : 1990 : R2002 | Standard Test Method for Measuring the Interzone Attenuation of Furniture Panels Used as Acoustical Barriers (Withdrawn 2005) |
| ASTM E 90 : 2009 | Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements |
| ASTM E 2179 : 2003 : EDT 2 | Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors |
| ANSI/ASA S12.58:2012 | SOUND POWER LEVEL DETERMINATION FOR SOURCES USING A SINGLE-SOURCE POSITION |
| ANSI/ASA S12.70 : 2016 | CRITERIA FOR EVALUATING SPEECH PRIVACY IN HEALTHCARE FACILITIES |
| NASA STD 3000 VOL 2 : 1995 | MAN-SYSTEMS INTEGRATION STANDARDS - VOLUME 2 |
| ANSI S3.1 : 1999 : R2013 | MAXIMUM PERMISSIBLE AMBIENT NOISE LEVELS FOR AUDIOMETRIC TEST ROOMS |
| SAE ARP1279 | STANDARD INDOOR METHOD OF COLLECTION AND PRESENTATION OF THE BARE TURBOSHAFT ENGINE NOISE DATA FOR USE IN HELICOPTER INSTALLATIONS |
| ASHRAE 68 : 0 | LABORATORY METHOD OF TESTING TO DETERMINE THE SOUND POWER IN A DUCT |
| SAE ARP1307B | Measurement of Exterior Noise Produced by Aircraft Auxiliary Power Units (APUs) and Associated Aircraft Systems During Ground Operation |
| IEEE 269-2010 REDLINE | IEEE Standard Methods for Measuring Transmission Performance of Analog and Digital Telephone Sets, Handsets, and Headsets |
| ASTM E 1376 : 1990 : R2002 | Standard Test Method for Measuring the Interzone Attenuation of Sound Reflected by Wall Finishes and Furniture Panels (Withdrawn 2005) |
| ANSI S1.42 : 2001 : R2011 | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
| ANSI S1.42 : 2001 | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
| IEEE 115-2009 REDLINE | IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis |
| ANSI S1.4 : 1983 | SPECIFICATION FOR SOUND LEVEL METERS |
| ANSI/ASA S2.16 : 1997(R2016) | VIBRATORY NOISE MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| ANSI S3.35 : 2010 | METHOD OF MEASUREMENT OF PERFORMANCE CHARACTERISTICS OF HEARING AIDS UNDER SIMULATED REAL-EAR WORKING CONDITIONS |
| ANSI S12.76 : 2017 | METHODS FOR MEASUREMENT OF SUPERSONIC JET NOISE FROM UNINSTALLED MILITARY AIRCRAFT ENGINES |
| ANSI S1.42 : 2001(R2016) | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
| ASTM E 2235 : 2004 | Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods |
| ANSI/ASA S12.58:2012(R2019) | SOUND POWER LEVEL DETERMINATION FOR SOURCES USING A SINGLE-SOURCE POSITION |
| MIL-STD-1474 Revision E:2015 | NOISE LIMITS |
| MIL-STD-912 Base Document:1990 | PHYSICAL EAR NOISE ATTENUATION TESTING |
| ANSI S3.1 : 1999 : R2008 | MAXIMUM PERMISSIBLE AMBIENT NOISE LEVELS FOR AUDIOMETRIC TEST ROOMS |
| MIL-STD-1789 Revision A:1988 | SOUND PRESSURE LEVELS IN AIRCRAFT (REQUEST FOR ISSUE OTHER THAN DOD MUST BE SENT VIA ASD/ENES, WRIGHT-PATTERSON AFB OH 45433-6503 |
| BS ISO 18405:2017 | Underwater acoustics. Terminology |
| ASTM E 2963 : 2016 : REDLINE | Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments |
| MIL-S-008806 Revision B:1970 | SOUND PRESSURE LEVELS IN AIRCRAFT, GENERAL SPECIFICATION FOR |
| ASTM E 2235 : 2004 : R2012 | Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods |
| ANSI S3.29 : 0 | GUIDE TO THE EVALUATION OF HUMAN EXPOSURE TO VIBRATION IN BUILDINGS |
| ANSI S1.40 : 2006 | SPECIFICATIONS AND VERIFICATION PROCEDURES FOR SOUND CALIBRATORS |
| ANSI S3.25 : 2009 | OCCLUDED EAR SIMULATOR |
| ANSI/ASA S3.25 : 2009(R2014) | OCCLUDED EAR SIMULATOR |
| ANSI S1.40 : 2006 : R2011 | SPECIFICATIONS AND VERIFICATION PROCEDURES FOR SOUND CALIBRATORS |
| ANSI/ASA S3.7 : 2016 | METHOD FOR MEASUREMENT AND CALIBRATION OF EARPHONES |
| ANSI S2.71 : 1983 | GUIDE TO THE EVALUATION OF HUMAN EXPOSURE TO VIBRATION IN BUILDINGS |
| ANSI/ASA S1.42 : 2001(R2016) | DESIGN RESPONSE OF WEIGHTING NETWORKS FOR ACOUSTICAL MEASUREMENTS |
| ANSI S2.16 : 1997 : R2011 | VIBRATORY NOISE MEASUREMENTS AND ACCEPTANCE CRITERIA OF SHIPBOARD EQUIPMENT |
| ANSI S1.11 : 2014 | SPECIFICATION FOR OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND ANALOG AND DIGITAL FILTERS |
| ASTM E 1375 : 1990 : R1994 : EDT 1 | Standard Test Method for Measuring the Interzone Attenuation of Furniture Panels Used as Acoustical Barriers |
| ANSI/ASA S1.1:2013 | ACOUSTICAL TERMINOLOGY |
| ISO 3:1973 | Preferred numbers Series of preferred numbers |
| ISO 17:1973 | Guide to the use of preferred numbers and of series of preferred numbers |
| ISO 497:1973 | Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.