AASHTO M 157 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
SPECIFICATION FOR READY-MIXED CONCRETE
Hardcopy , PDF
12-27-2022
English
01-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. REFERENCED DOCUMENTS
3. TERMINOLOGY
4. MATERIALS
5. QUALITY OF CONCRETE
6. TOLERANCES IN SLUMP
7. AIR-ENTRAINED CONCRETE
8. MEASURING MATERIALS
9. BATCHING PLANT
10. MIXERS AND AGITATORS
11. MIXING AND DELIVERY
12. USE OF NON-AGITATING EQUIPMENT
13. INSPECTION
14. INSPECTION OF FRESH CONCRETE AND SAMPLING
15. SLUMP, AIR CONTENT, AND DENSITY
16. BATCH TICKET INFORMATION
17. METHODS OF SAMPLING AND TESTING
18. KEYWORDS
ANNEX (Mandatory Information)
A1 - CONCRETE UNIFORMITY REQUIREMENTS
Includes ready-mixed concrete manufactured and delivered to a purchaser in a freshly mixed and unhardened state as hereinafter specified.
| DevelopmentNote |
Included in AASHTO HM. (09/2013)
|
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
American Association of State Highway and Transportation Officials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| AASHTO M 242M/M 242 : 2015 | SPECIFICATION FOR REINFORCED CONCRETE D-LOAD CULVERT, STORM DRAIN, AND SEWER PIPE |
| AASHTO M 259M : 2011 | SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS, STORM DRAINS, AND SEWERS [METRIC] |
| AASHTO M 259 : 2011 | SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS, STORM DRAINS, AND SEWERS |
| AASHTO M 176M/M 176 : 2007 : R2012 | SPECIFICATION FOR POROUS CONCRETE PIPE |
| AASHTO M 273M : 2011 | SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS, STORM DRAINS, AND SEWERS WITH LESS THAN 0.6 M OF COVER SUBJECTED TO HIGHWAY LOADINGS [METRIC] |
| AASHTO M 259 : 2011 : R2015 | SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS, STORM DRAINS, AND SEWERS |
| AASHTO M 170 : 2015 | SPECIFICATION FOR REINFORCED CONCRETE CULVERT, STORM DRAIN, AND SEWER PIPE |
| AASHTO M 86M/M 86 : 0 | SPECIFICATION FOR NONREINFORCED CONCRETE SEWER, STORM DRAIN, AND CULVERT PIPE |
| AASHTO M 259M : 2011 : R2015 | SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS, STORM DRAINS, AND SEWERS [METRIC] |
| AASHTO M 178M/M 178 : 2007 : R2012 | SPECIFICATION FOR CONCRETE DRAIN TILE |
| AASHTO M 206M/M 206 : 2015 | SPECIFICATION FOR REINFORCED CONCRETE ARCH CULVERT, STORM DRAIN, AND SEWER PIPE |
| ACI 522R : 2010(R2011) | REPORT ON PERVIOUS CONCRETE |
| ACI 522R : 2010 | REPORT ON PERVIOUS CONCRETE |
| AASHTO M 273 : 2011 | SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS, STORM DRAINS, AND SEWERS WITH LESS THAN 2 FT OF COVER SUBJECTED TO HIGHWAY LOADINGS |
| AASHTO M 273M : 2011 : R2015 | SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS, STORM DRAINS, AND SEWERS WITH LESS THAN 0.6 M OF COVER SUBJECTED TO HIGHWAY LOADINGS [METRIC] |
| AASHTO M 273 : 2011 : R2015 | SPECIFICATION FOR PRECAST REINFORCED CONCRETE BOX SECTIONS FOR CULVERTS, STORM DRAINS, AND SEWERS WITH LESS THAN 2 FT OF COVER SUBJECTED TO HIGHWAY LOADINGS |
| AASHTO M 199M/M 199 : 2014 | SPECIFICATION FOR PRECAST REINFORCED CONCRETE MANHOLE SECTIONS |
| AASHTO M 207M/M 207 : 2015 | SPECIFICATION FOR REINFORCED CONCRETE ELLIPTICAL CULVERT, STORM DRAIN, AND SEWER PIPE |
| AASHTO M 307 : 2013(R2017) | SPECIFICATION FOR SILICA FUME USED IN CEMENTITIOUS MIXTURES |
| ASTM C 1603 : 2016 : REDLINE | Standard Test Method for Measurement of Solids in Water |
| AASHTO T 152 : 2013 | METHOD OF TEST FOR AIR CONTENT OF FRESHLY MIXED CONCRETE BY THE PRESSURE METHOD |
| ASTM D 512 : 2012 | Standard Test Methods for Chloride Ion In Water (Withdrawn 2021) |
| ASTM C 1157/C1157M : 2017 : REDLINE | Standard Performance Specification for Hydraulic Cement |
| AASHTO M 85 : 2015 | SPECIFICATION FOR PORTLAND CEMENT |
| ACI 305R : 2010 | GUIDE TO HOT WEATHER CONCRETING |
| AASHTO M 302 : 2015 | SPECIFICATION FOR SLAG CEMENT FOR USE IN CONCRETE AND MORTARS |
| AASHTO T 196M/T 196 : 1900 | METHOD OF TEST FOR AIR CONTENT OF FRESHLY MIXED CONCRETE BY THE VOLUMETRIC METHOD |
| ACI 211.1 : 1991 | SELECTING PROPORTIONS FOR NORMAL, HEAVYWEIGHT AND MASS CONCRETE |
| AASHTO M 80 : 2013 | SPECIFICATION FOR COARSE AGGREGATE FOR HYDRAULIC CEMENT CONCRETE |
| ACI 306R : 2016 | GUIDE TO COLD WEATHER CONCRETING |
| AASHTO M 194M/M 194 : 1900 | SPECIFICATION FOR CHEMICAL ADMIXTURES FOR CONCRETE |
| AASHTO M 6 : 2013(R2018) | SPECIFICATION FOR FINE AGGREGATE FOR HYDRAULIC CEMENT CONCRETE |
| AASHTO T 131 : 2015 | METHOD OF TEST FOR TIME OF SETTING OF HYDRAULIC CEMENT BY VICAT NEEDLE |
| AASHTO T 26 : 1979 | METHOD OF TEST FOR QUALITY OF WATER TO BE USED IN CONCRETE |
| AASHTO T 121M/T 121 : 2016 | METHOD OF TEST FOR DENSITY (UNIT WEIGHT), YIELD, AND AIR CONTENT (GRAVIMETRIC) OF CONCRETE |
| AASHTO T 23 : 2014 | METHOD OF TEST FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE FIELD |
| ACI 211.2 : 1998 | SELECTING PROPORTIONS FOR STRUCTURAL LIGHTWEIGHT CONCRETE |
| AASHTO T 106M/T 106 : 1900 | METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR (USING 50-MM OR 2-IN. CUBE SPECIMENS) |
| AASHTO T 105 : 2015 | METHOD OF TEST FOR CHEMICAL ANALYSIS OF HYDRAULIC CEMENT |
| AASHTO T 290 : 1995 | METHOD OF TEST FOR DETERMINING WATER-SOLUBLE SULFATE ION CONTENT IN SOIL |
| AASHTO T 119M/T 119 : 1900 | METHOD OF TEST FOR SLUMP OF HYDRAULIC CEMENT CONCRETE |
| AASHTO R 60 : 2012(R2016) | PRACTICE FOR SAMPLING FRESHLY MIXED CONCRETE |
| AASHTO M 240 : 2015 | SPECIFICATION FOR BLENDED HYDRAULIC CEMENT |
| AASHTO M 154M/M 154 : 1900 | SPECIFICATION FOR AIR-ENTRAINING ADMIXTURES FOR CONCRETE |
| AASHTO T 22 : 2014 | METHOD OF TEST FOR COMPRESSIVE STRENGTH OF CYLINDRICAL CONCRETE SPECIMENS |
| ASTM C 567/C567M : 2014 : REDLINE | Standard Test Method for Determining Density of Structural Lightweight Concrete |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.