AAMI ST15883-1 : 2009
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, TERMS AND DEFINITIONS AND TESTS
11-23-2014
AAMI ST15883-1 : 2009 : INC : AMD 1 : 2014 : R201400
ANSI/AAMI ST15883-1:2009(R2014) &A1:2014&A2:2012
01-01-2014
Glossary of equivalent standards
Committee representation
Background of AAMI adoption of ISO 15883-1:2006
U.S. Deviations to ISO 15883-1:2006
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Performance requirements
5 Mechanical and process requirements
6 Testing for conformity
7 Documentation
8 Information to be supplied by the manufacturer
9 Marking, labeling and packaging
Annex A (informative) - Test program
Annex B (informative) - A[0] concept - Comparative
lethality of moist heat processes
Annex C (normative) - Test methods for the detection
and assessment of residual proteinaceous
contamination
Annex D (normative) - Microbiological recovery medium
for estimation of bacterial contamination of water
Annex E (informative) - Re-qualification and routine testing
Bibliography
Describes general performance requirements for washer-disinfectors (WD) and their accessories that are intended to be used for cleaning and disinfection of re-usable medical devices and other articles used in the context of medical, dental, pharmaceutical and veterinary practice. It specifies performance requirements for cleaning and disinfection as well as for the accessories which can be required to achieve the necessary performance. The methods and instrumentation required for validation, routine control and monitoring and re-validation, periodically and after essential repairs, are also specified.
| Committee |
WG 13
|
| DocumentType |
Standard
|
| PublisherName |
Association for the Advancement of Medical Instrumentation
|
| Status |
Superseded
|
| SupersededBy |
| ANSI/AAMI ST58:2013(R2018) | CHEMICAL STERILIZATION AND HIGH-LEVEL DISINFECTION IN HEALTH CARE FACILITIES |
| AAMI TIR30 : 2011 | A COMPENDIUM OF PROCESSES, MATERIALS, TEST METHODS, AND ACCEPTANCE CRITERIA FOR CLEANING REUSABLE MEDICAL DEVICES |
| AAMI TIR 12 : 2010 | DESIGNING, TESTING, AND LABELING REUSABLE MEDICAL DEVICES FOR REPROCESSING IN HEALTH CARE FACILITIES: A GUIDE FOR MEDICAL DEVICE MANUFACTURERS |
| AAMI TIR34 : 2014 | WATER FOR THE REPROCESSING OF MEDICAL DEVICES |
| AAMI TIR30:2011(R2016) | A COMPENDIUM OF PROCESSES, MATERIALS, TEST METHODS, AND ACCEPTANCE CRITERIA FOR CLEANING REUSABLE MEDICAL DEVICES |
| AAMI ST15883-3 : 2012 | WASHER-DISINFECTORS - PART 3: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR HUMAN WASTE CONTAINERS |
| ANSI/AAMI ST15883-2:2013(R2015) (ISO 15883-2:2006 MOD) | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| AAMI ST15883-2 : 2013 | WASHER-DISINFECTORS - PART 2: REQUIREMENTS AND TESTS FOR WASHER-DISINFECTORS EMPLOYING THERMAL DISINFECTION FOR SURGICAL INSTRUMENTS, ANESTHETIC EQUIPMENT, BOWLS, DISHES, RECEIVERS, UTENSILS, GLASSWARE, ETC. |
| BS 2745-3:1993 | Washer-disinfectors for medical purposes Specification for washer-disinfectors except those used for processing human-waste containers and laundry |
| IEC 61010-2-040:2015 | Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials |
| EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
| IEC 60073:2002 | Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators |
| ISO 11737-2:2009 | Sterilization of medical devices Microbiological methods Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process |
| ISO 11737-1:2006 | Sterilization of medical devices Microbiological methods Part 1: Determination of a population of microorganisms on products |
| ISO 15883-3:2006 | Washer-disinfectors — Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| EN 1717:2000 | Protection against pollution of potable water in water installations and general requirements of devices to prevent pollution by backflow |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO/TS 15883-5:2005 | Washer-disinfectors Part 5: Test soils and methods for demonstrating cleaning efficacy |
| ISO 14698-1:2003 | Cleanrooms and associated controlled environments Biocontamination control Part 1: General principles and methods |
| ISO 14644-3:2005 | Cleanrooms and associated controlled environments Part 3: Test methods |
| ISO/TS 11139:2006 | Sterilization of health care products Vocabulary |
| ISO 15883-4:2008 | Washer-disinfectors Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes |
| ISO 13849-2:2012 | Safety of machinery — Safety-related parts of control systems — Part 2: Validation |
| BS 2745-2:1993 | Washer-disinfectors for medical purposes Specification for human waste container washer-disinfectors |
| DIN 58955-3:1998-09 | DECONTAMINATION-APPARATUS IN THE MEDICAL FIELD - EFFICIENCY TESTING |
| IEC 80416-1:2008 | Basic principles for graphical symbols for use on equipment - Part 1: Creation of graphical symbols for registration |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| IEC 60751:2008 | Industrial platinum resistance thermometers and platinum temperature sensors |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 11138-1:2017 | Sterilization of health care products — Biological indicators — Part 1: General requirements |
| EN 1822-1:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking |
| ANSI/AAMI ST79:2017 | COMPREHENSIVE GUIDE TO STEAM STERILIZATION AND STERILITY ASSURANCE IN HEALTH CARE FACILITIES |
| IEC 61508-1:2010 | Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements (see Functional Safety and IEC 61508) |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 15883-2:2006 | Washer-disinfectors — Part 2: Requirements and tests for washer-disinfectors employing thermal disinfection for surgical instruments, anaesthetic equipment, bowls, dishes, receivers, utensils, glassware, etc. |
| DIN 10510:2013-10 | Food hygiene - Commercial dishwashing with multitank-transportdishwashers - Hygiene requirements, procedure testing |
| IEC 60584-1:2013 | Thermocouples - Part 1: EMF specifications and tolerances |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.