98/711668 DC : DRAFT AUG 98
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PREN 10301 - STEEL TUBES AND FITTINGS FOR ON AND OFFSHORE PIPELINES - INTERNAL COATING FOR THE REDUCTION OF FRICTION FOR CONVEYANCE OF NON CORROSIVE GAS
09-17-2003
11-23-2012
Foreword
1 Scope
2 Normative references
3 Definitions
3.1 Product manufacturer
3.2 Coater
3.3 Purchaser
3.4 Tack free
4 Symbols
5 Coating material
5.1 General
5.2 Qualification of the coating
5.3 Technical specification
5.4 Packaging
5.5 Quality assurance
6 Information to be supplied by the Purchaser on
production control
6.1 Mandatory
6.2 Options to be indicated by the Purchaser
7 Application of the coating
7.1 Surface preparation
7.2 Composition of the coating
8 Requirements of the applied coating
8.1 General
8.2 Appearance and continuity
8.3 Dry film thickness
8.4 Adhesion test - Cross-cut test
8.5 Adhesion test - Resistance to removal
8.6 Buchholz hardness
8.7 Ageing test
8.8 Bend test
8.9 Scratch test (Informative)
9 Inspection
9.1 General
9.2 Documents
9.3 Sampling
9.4 Unit of product and material traceability
9.5 Nature and frequency of testing and control
9.6 Retests
10 Repairs
11 Marking
12 Handling, transportation and storage
12.1 Handling
12.2 Transportation to the storage area
12.3 Storage
12.4 Loading of tubes for delivery
ANNEX A (Normative) Ash content
ANNEX B (Normative) Dry film thickness
ANNEX C (Normative) Gas pressure blistering
ANNEX D (Normative) Resistance to distilled water
ANNEX E (Normative) Chemical resistance
ANNEX F (Normative) Hydraulic blistering
ANNEX G (Normative) Porosity of the film on glass
panels
ANNEX H (Normative) Wet-sponge test
| Committee |
ISE/16
|
| DocumentType |
Draft
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 10301 : DRAFT 1998 | Identical |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 3001:1999 | Plastics Epoxy compounds Determination of epoxy equivalent |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| EN ISO 9002:1994/AC:1997 | QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION |
| ISO 2811:1974 | Paints and varnishes — Determination of density |
| ISO 2555:1989 | Plastics Resins in the liquid state or as emulsions or dispersions Determination of apparent viscosity by the Brookfield Test method |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| ISO 1518:1992 | Paints and varnishes Scratch test |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| ISO 2815:2003 | Paints and varnishes Buchholz indentation test |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 1519:2011 | Paints and varnishes Bend test (cylindrical mandrel) |
| ISO 1515:1973 | Paints and varnishes — Determination of volatile and non-volatile matter |
| ISO 8295:1995 | Plastics Film and sheeting Determination of the coefficients of friction |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| ISO 4287-1:1984 | Surface roughness — Terminology — Part 1: Surface and its parameters |
| ISO 6860:2006 | Paints and varnishes Bend test (conical mandrel) |
| ISO 2431:2011 | Paints and varnishes Determination of flow time by use of flow cups |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.