16/30342037 DC : 0
Current
The latest, up-to-date edition.
BS EN 13941-1 - DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 1: DESIGN
Hardcopy , PDF
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions, units and symbols
4 General requirements
5 Requirements for components and materials
6 Design and calculation
7 Limit states
Annex A (normative) - Design of piping components
under internal pressure
Annex B (informative) - Soil properties and geotechnical
parameters for pipe/soil interaction analyses
Annex C (normative) - Flexibility and stress
concentration of pipe components
Annex D (informative) - Calculation of heat losses
Annex E (informative) - Specific requirements for twin
Pipe systems
Annex F (normative) - Compressive testing of expansion
cushions
Annex G (informative) - Principles for determination of
bending moments for testing of district heating
valves
Annex H (informative) - Scope of EN 13941 in relation
to Pressure Equipment Directive (PED), 2014/68/EU,
May 15th, 2014
Annex I (informative) - Quality control program and
documentation
Annex J (informative) - Casing: Formulas for Miner Rule
Annex K (informative) - Strength calculation of horizontal
directional drillings
Bibliography
BS EN 13941-1.
| Committee |
RHE/9
|
| DocumentType |
Draft
|
| Pages |
164
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| Standards | Relationship |
| PREN 13941-1 : DRAFT 2016 | Identical |
| EN ISO/TS 17892-10 : 2004 | GEOTECHNICAL INVESTIGATION AND TESTING - LABORATORY TESTING OF SOIL - PART 10: DIRECT SHEAR TESTS |
| ENV 1991-3:1995/AC:1998 | EUROCODE 1 - BASIS OF DESIGN AND ACTIONS ON STRUCTURES - TRAFFIC LOADS ON BRIDGES |
| EN 488:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Steel valve assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| EN 1594:2013 | Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
| EN 10216-2:2013 | Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties |
| EN 448:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| ISO 22475-1:2006 | Geotechnical investigation and testing Sampling methods and groundwater measurements Part 1: Technical principles for execution |
| EN 14419:2009 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Surveillance systems |
| NEN 3650 : 1992 C1 1996 | REQUIREMENTS FOR STEEL PIPELINE TRANSPORTATION SYSTEMS |
| ISO 12957-1:2005 | Geosynthetics Determination of friction characteristics Part 1: Direct shear test |
| EN 13480-3:2017 | Metallic industrial piping - Part 3: Design and calculation |
| CEN/TR 16911:2015 | Heat meters - Recommendations for circulation water in industrial and district heating systems and their operation |
| EN 489:2009 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Joint assembly for steel service pipes, polyurethane thermal insulation and outer casing of polyethylene |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| CEN/TR 1295-2:2005 | Structural design of buried pipelines under various conditions of loading - Part 2: Summary of nationally established methods of design |
| AD 2000-Merkblatt S 2:2012-07 | Analysis for cyclic loading |
| EN ISO 22475-1:2006 | Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 1: Technical principles for execution (ISO 22475-1:2006) |
| EN 253:2009+A2:2015 | District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Pipe assembly of steel service pipe, polyurethane thermal insulation and outer casing of polyethylene |
| PREN 13941-2 : DRAFT 2016 | DISTRICT HEATING PIPES - DESIGN AND INSTALLATION OF THERMAL INSULATED BONDED SINGLE AND TWIN PIPE SYSTEMS FOR DIRECTLY BURIED HOT WATER NETWORKS - PART 2: INSTALLATION |
| EN 10253-2:2007 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.