15/30324901 DC : 0
NA
NA
Status of Standard is Unknown
BS EN 1504-3 - PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES - DEFINITIONS, REQUIREMENTS, QUALITY CONTROL AND AVCP - PART 3: REPAIR CONCRETE AND MORTARS
Available format(s)
Hardcopy , PDF
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements for constituent
materials
5 Performance characteristics
for intended uses
6 Product Characteristics
7 Sampling
8 Assessment and verification of
the constancy of performance - AVCP
9 Marking and labelling
Annex A (informative) - Minimum frequency
of testing for FPC
Annex B (informative) - Test methods for
special applications
Annex C (informative) - Electrical resistivity
Annex ZA (informative) - Clauses of this
European Standard addressing the
provisions of the EU Construction
Products Regulation
Bibliography
BS EN 1504-3.
| Committee |
B/517/8
|
| DocumentType |
Draft
|
| Pages |
36
|
| PublisherName |
British Standards Institution
|
| Status |
NA
|
| Standards | Relationship |
| PREN 1504-3 : DRAFT 2015 | Identical |
| EN 934-1:2008 | Admixtures for concrete, mortar and grout - Part 1: Common requirements |
| EN 13396:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Measurement of chloride ion ingress |
| EN 520:2004+A1:2009 | Gypsum plasterboards - Definitions, requirements and test methods |
| EN ISO 11358-1:2014 | Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) |
| EN 1504-10:2017 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 10: Site application of products and systems and quality control of the works |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| EN 13529:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Resistance to severe chemical attack |
| EN 12190:1998 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| EN 13687-2:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 2: Thunder-shower cycling (thermal shock) |
| EN 480-14:2006 | Admixtures for concrete, mortar and grout - Test methods - Part 14: Determination of the effect on corrosion susceptibility of reinforcing steel by potentiostatic electro-chemical test |
| EN 1542:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off |
| EN 1767:1999 | Products and systems for the protection and repair of concrete structures - Test methods - Infrared analysis |
| EN 13057:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance of capillary absorption |
| EN 13395-2:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar |
| EN 13036-4:2011 | Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN ISO 1182:2010 | Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) |
| EN 13295:2004 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of resistance to carbonation |
| EN 1015-11 : 1999 AMD 1 2006 | METHODS OF TEST FOR MORTAR FOR MASONRY - PART 11: DETERMINATION OF FLEXURAL AND COMPRESSIVE STRENGTH OF HARDENED MORTAR |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
| EN ISO 9514:2005 | Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
| ISO 1182:2010 | Reaction to fire tests for products Non-combustibility test |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| EN 14306:2015 | Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification |
| EN 1877-2:2000 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the total basicity number |
| EN 13412:2006 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of modulus of elasticity in compression |
| EN ISO 9239-1:2010 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
| EN 12620:2002+A1:2008 | Aggregates for concrete |
| ISO 390:1993 | Products in fibre-reinforced cement Sampling and inspection |
| EN 12192-1:2002 | Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar |
| EN 1504-2:2004 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 2: Surface protection systems for concrete |
| ISO 11358:1997 | Plastics Thermogravimetry (TG) of polymers General principles |
| EN ISO 12696:2016 | Cathodic protection of steel in concrete (ISO 12696:2016) |
| CEN/TS 12390-9:2016 | Testing hardened concrete - Part 9: Freeze-thaw resistance with de-icing salts - Scaling |
| ISO 2812-1:2017 | Paints and varnishes — Determination of resistance to liquids — Part 1: Immersion in liquids other than water |
| EN 12617-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion |
| EN 13395-3:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 3: Test for flow of repair concrete |
| ISO 3251:2008 | Paints, varnishes and plastics Determination of non-volatile-matter content |
| EN 1877-1:2000 | Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 1: Determination of epoxy equivalent |
| EN 1504-1:2005 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 1: Definitions |
| EN 1504-8:2016 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and AVCP - Part 8: Quality control and Assessment and verification of the constancy of performance (AVCP) |
| ISO 9239-1:2010 | Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
| EN 13687-1:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 1: Freeze-thaw cycling with de-icing salt immersion |
| EN 13584:2003 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of creep in compression for repair products |
| EN 1766:2017 | Products and systems for the protection and repair of concrete structures - Test methods - Reference concretes for testing |
| ISO 9514:2005 | Paints and varnishes Determination of the pot life of multicomponent coating systems Preparation and conditioning of samples and guidelines for testing |
| EN 13395-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead |
| EN ISO 1716:2010 | Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010) |
| EN 1770:1998 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion |
| ISO 12696:2016 | Cathodic protection of steel in concrete |
| EN 13687-4:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 4: Dry thermal cycling |
| EN 14487-1:2005 | Sprayed concrete - Part 1: Definitions, specifications and conformity |
| EN 1504-9:2008 | Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and evaluation of conformity - Part 9: General principles for the use of products and systems |
| EN 13395-1:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars |
| EN 13294:2002 | Products and systems for the protection and repair of concrete structures - Test methods - Determination of stiffening time |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.