15/30324689 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 61162-1 - MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS - DIGITAL INTERFACES - PART 1: SINGLE TALKER AND MULTIPLE LISTENERS
Hardcopy , PDF
01-31-2017
English
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Manufacturer's documentation
5 Hardware specification
6 Data transmission
7 Data format protocol
8 Data content
9 Applications
Annex A (informative) - Glossary
Annex B (normative) - Guidelines for methods of testing
and required test results
Annex C (normative) - Six-bit binary field conversion
Annex D (normative) - Alarm system fields
Annex E (informative) - Example of use of FIR, DOR
and WAT sentences
Annex F (informative) - Example encapsulation sentence
Bibliography
BS EN 61162-1.
Committee |
EPL/80
|
DocumentType |
Draft
|
Pages |
168
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy |
IEC 61174:2015 | Maritime navigation and radiocommunication equipment and systems - Electronic chart display and information system (ECDIS) - Operational and performance requirements, methods of testing and required test results |
ISO 8728:2014 | Ships and marine technology — Marine gyro-compasses |
ISO 20673:2007 | Ships and marine technology Electric rudder angle indicators |
IEC 62320-3:2015 | Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - Part 3: Repeater stations - Minimum operational and performance requirements - Methods of test and required test results |
IEC 61097-1:2007 | Global maritime distress and safety system (GMDSS) - Part 1: Radar transponder - Marine search and rescue (SART) - Operational and performance requirements, methods of testing and required test results |
IEC 62320-2:2016 | Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 2: AIS AtoN Stations - Operational and performance requirements, methods of testing and required test results |
ISO/IEC 8859-1:1998 | Information technology 8-bit single-byte coded graphic character sets Part 1: Latin alphabet No. 1 |
ISO 22554:2015 | Ships and marine technology — Propeller shaft revolution indicators — Electric type and electronic type |
ISO/IEC 10646:2014 | Information technology Universal Coded Character Set (UCS) |
IEC 62388:2013 | Maritime navigation and radiocommunication equipment and systems - Shipborne radar - Performance requirements, methods of testing and required test results |
IEC 62238:2003 | Maritime navigation and radiocommunication equipment and systems - VHF radiotelephone equipment incorporating Class "D" Digital Selective Calling (DSC) - Methods of testing and required test results |
IEC 62288:2014 | Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results |
IEC 61097-4:2012+AMD1:2016 CSV | Global maritime distress and safety system (GMDSS) - Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - Operational and performance requirements, methods oftesting and required test results |
IEC 61097-7:1996 | Global maritime distress and safety system (GMDSS) - Part 7: Shipborne VHF radiotelephone transmitter and receiver - Operational and performance requirements, methods of testing and required test results |
IEC 62287-2:2017 | Maritime navigation and radiocommunication equipment and systems - Class B shipborne equiment of the automatic identification system (AIS) - Part 2: Self-organising time division multiple access (SOTDMA) techniques |
IEC 61993-2:2012 | Maritime navigation and radiocommunication equipment and systems - Automatic identification systems (AIS) - Part 2: Class A shipborne equipment of the automatic identification system (AIS) - Operational and performance requirements, methods of test and required test results |
IEC 62287-1:2017 | Maritime navigation and radiocommunication equipment and systems - Class B shipborne equiment of the automatic identification system (AIS) - Part 1: Carrier-sense time division multiple access (CSTDMA) techniques |
IEC 61996-1:2013 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 1: Performance requirements, methods of testing and required test results |
IEC 61075:1991 | Loran-C receivers for ships - Minimum performance standards - Methods of testing and required test results |
IMO IF110 : 2014 SUPP 2016 | SOLAS CONSOLIDATED EDITION |
ISO 25862:2009 | Ships and marine technology Marine magnetic compasses, binnacles and azimuth reading devices |
IEC 61097-2:2008 | Global maritime distress and safety system (GMDSS) - Part 2: COSPAS-SARSAT EPIRB - Satellite emergency position indicating radio beacon operating on 406 MHz - Operational and performance requirements, methods of testing and required test results |
ISO 22090-1:2014 | Ships and marine technology — Transmitting heading devices (THDs) — Part 1: Gyro-compasses |
ISO 22090-3:2014 | Ships and marine technology — Transmitting heading devices (THDs) — Part 3: GNSS principles |
IEC 61108-1:2003 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 1: Global positioning system (GPS) - Receiver equipment - Performance standards, methods of testing and required test results |
ISO 11606:2000 | Ships and marine technology Marine electromagnetic compasses |
IEC 61097-3:2017 | Global maritime distress and safety system (GMDSS) - Part 3: Digital selective calling (DSC) equipment - Operational and performance requirements, methods of testing and required test results |
IEC 61023:2007 | Maritime navigation and radiocommunication equipment and systems - Marine speed and distance measuring equipment (SDME) - Performance requirements, methods of testing and required test results |
ISO 22090-2:2014 | Ships and marine technology — Transmitting heading devices (THDs) — Part 2: Geomagnetic principles |
IEC 61108-4:2004 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment - Performance requirements, methods of testing and required test results |
ISO 9875:2000 | Ships and marine technology — Marine echo-sounding equipment |
IEC 60945:2002 | Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results |
IEC 62065:2014 | Maritime navigation and radiocommunication equipment and systems - Track control systems - Operational and performance requirements, methods of testing and required test results |
IEC 61097-8:1998 | Global maritime distress and safety system (GMDSS) - Part 8: Shipborne watchkeeping receivers for the reception of digital selective calling (DSC) in the maritime MF, MF/HF and VHF bands - Operational and performance requirements, methods of testing and required test results |
IEC 61097-6:2005+AMD1:2011 CSV | Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ships (NAVTEX) |
ISO 20672:2007 | Ships and marine technology Rate of turn indicators |
ISO 22555:2007 | Ships and marine technology Propeller pitch indicators |
IEC 62320-1:2015 | Maritime navigation and radiocommunication equipment and systems - Automatic identification system (AIS) - Part 1: AIS Base Stations - Minimum operational and performance requirements, methods of testing and required test results |
ISO 11674:2006 | Ships and marine technology Heading control systems |
IEC 61996-2:2007 | Maritime navigation and radiocommunication equipment and systems - Shipborne voyage data recorder (VDR) - Part 2: Simplified voyage data recorder (S-VDR) - Performance requirements, methods of testing and required test results |
IEC 61162-2:1998 | Maritime navigation and radiocommunication equipment and systems - Digital interfaces - Part 2: Single talker and multiple listeners, high-speed transmission |
IEC 61108-2:1998 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 2: Global navigation satellite system (GLONASS) - Receiver equipment - Performance standards, methods of testing and required test results |
IEC 61097-13:2003 | Global maritime distress and safety system (GMDSS) - Part 13: Inmarsat F77 ship earth station equipment - Operational and performance requirements, methods of testing and required test results |
IEC 61108-3:2010 | Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 3: Galileo receiver equipment - Performance requirements, methods of testing and required test results |
ISO 10596:2009 | Ships and marine technology Marine wind vane and anemometers |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.