14/30273520 DC : 0
NA
Status of Standard is Unknown
BS EN ISO 2063-2 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: CONDITIONS FOR EXECUTION OF CORROSION PROTECTION WORKS BY THERMAL SPRAY PROCESSES
Hardcopy , PDF
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements to the manufacturer
5 Quality assurance measures of the manufacturer
6 Manufacturing of thermal sprayed coatings
7 Tests - Test procedures
8 Health and safety and environment protection
9 Additional requirements for working on site
10 Execution of spray works on site in the case of
planned maintenance of a service operated coating
11 Tests - Test procedures
12 Documentation of the procedure and tests in
the case of maintenance
13 Health and safety and environment protection on site
Annex A (normative) - Adhesion testing using the
pull-off test according to ISO 4624
Annex B (informative) - Documentation of the applied
maintenance procedure, the thermal spray procedure
and test results in the case of a planned maintenance
Annex C (informative) - Documentation of the applied thermal
spray procedure and test results in the case of a new
manufacturing
Annex D (informative) - Test certificate for job reference
qualification for thermal sprayers working on site
according to ISO 2063-2
Annex E (normative) - Test specimens - Spray positions
Annex F (informative) - Assessment of the coatability
Annex G (informative) - Bend test and its execution
Annex H (informative) - Additional information for surface
preparation
Annex I (informative) - Further details for sealing
Annex J - Further instructions to safety and activities on site
Annex K (informative) - Repair procedures of service
loaded coatings and recommended repair procedures
Bibliography
BS EN ISO 2063-2.
| Committee |
STI/40
|
| DocumentType |
Draft
|
| Pages |
48
|
| PublisherName |
British Standards Institution
|
| Status |
NA
|
| ISO 19840:2012 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces |
| ISO 14917:2017 | Thermal spraying — Terminology, classification |
| ISO 8502-3:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 3: Assessment of dust on steel surfaces prepared for painting (pressure-sensitive tape method) |
| ISO 8502-4:2017 | Preparation of steel substrates before application of paints and related products — Tests for the assessment of surface cleanliness — Part 4: Guidance on the estimation of the probability of condensation prior to paint application |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 12944-6:1998 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 6: Laboratory performance test methods |
| ISO 12679:2011 | Thermal spraying Recommendations for thermal spraying |
| ISO 14232:2000 | Thermal spraying Powders Composition and technical supply conditions |
| EN 1395-3:2007 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 3: Arc spraying |
| ISO 14713-1:2017 | Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance |
| ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
| ISO 12944-5:2007 | Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems |
| EN 1395-1:2007 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 1: General requirements |
| ISO 17834:2003 | Thermal spraying Coatings for protection against corrosion and oxidation at elevated temperatures |
| ISO 11126-4:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 4: Coal furnace slag |
| ISO 8503-3:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Focusing microscope procedure |
| ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
| ISO 8501-3:2006 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 3: Preparation grades of welds, edges and other areas with surface imperfections |
| ISO 14918:1998 | Thermal spraying Approval testing of thermal sprayers |
| EN 15339-2:2007 | Thermal spraying - Safety requirements for thermal spraying equipment - Part 2: Gas control units |
| EN 15520:2007 | Thermal spraying - Recommendations for constructional design of components with thermally sprayed coatings |
| ASTM D 610 : 2008 | Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces |
| ISO 14916:2017 | Thermal spraying — Determination of tensile adhesive strength |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
| ISO 12944-1:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
| EN 1395-6:2007 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 6: Manipulator systems |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| ISO 11126-3:1993 | Preparation of steel substrates before application of paints and related products Specifications for non-metallic blast-cleaning abrasives Part 3: Copper refinery slag |
| EN 1395-7:2007 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 7: Powder feed systems |
| ISO 11124-2:1993 | Preparation of steel substrates before application of paints and related products Specifications for metallic blast-cleaning abrasives Part 2: Chilled-iron grit |
| ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
| ISO 14923:2003 | Thermal spraying Characterization and testing of thermally sprayed coatings |
| ISO 8501-2:1994 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings |
| ISO 2178:2016 | Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
| ISO 12944-3:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 3: Design considerations |
| ISO 12690:2010 | Metallic and other inorganic coatings Thermal spray coordination Tasks and responsibilities |
| EN ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings (ISO 8501-1:2007) |
| EN 13507:2010 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
| ISO 12671:2012 | Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings |
| ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure |
| ISO 14922-1:1999 | Thermal spraying Quality requirements of thermally sprayed structures Part 1: Guidance for selection and use |
| ISO 14919:2015 | Thermal spraying — Wires, rods and cords for flame and arc spraying — Classification — Technical supply conditions |
| EN 15648:2009 | Thermal spraying - Component related procedure qualification |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
| EN 1395-2:2007 | Thermal spraying - Acceptance inspection of thermal spraying equipment - Part 2: Flame spraying including HVOF |
| ISO 12944-7:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 7: Execution and supervision of paint work |
| ISO 8503-5:2017 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.