13/30271116 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 1594 - GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE OVER 16 BAR - FUNCTIONAL REQUIREMENTS
Hardcopy , PDF
09-30-2013
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Quality and management systems
5 Safety and the environment
6 Pressure safety
7 Design
8 Materials and components
9 Construction
10 Operation and maintenance
Annex A (informative) - Settlement areas
Annex B (informative) - Mining subsidence
Annex C (informative) - Frost heave
Annex D (informative) - Landslide areas
Annex E (informative) - Areas with high seismic risk
Annex F (informative) - Soil mechanics parameters
Annex G (informative) - Bored/jacked crossings
Annex H (informative) - Allowable pulsation and vibration
levels
Annex I (informative) - Allowable vibration levels from
construction work - blasting
Annex J (informative) - Significant technical changes
between this European Standard and the previous
edition
Bibliography
BS EN 1594
| Committee |
GSE/33
|
| DocumentType |
Draft
|
| Pages |
95
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 1594 : DRAFT 2013 | Identical |
| EN 12732:2013+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| EN 10208-2:2009 | Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN 12327:2012 | Gas infrastructure - Pressure testing, commissioning and decommissioning procedures - Functional requirements |
| EN 15001-1:2009 | Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing |
| EN ISO 13686:2013 | Natural gas - Quality designation (ISO 13686:2013) |
| EN 14870-2:2004 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 2: Fittings (ISO 15590-2:2003 modified) |
| EN 10290:2002 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied polyurethane and polyurethane-modified coatings |
| EN 12007-3:2015 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
| EN 10288:2002 | Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings |
| EN 12560-1:2001 | Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts |
| EN 12560-3:2001 | Flanges and their joints - Gaskets for Class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets |
| EN 16001:2009 | Energy management systems - Requirements with guidance for use |
| ISO 15590-1:2009 | Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 1: Induction bends |
| EN 12560-2:2013 | Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges |
| EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| EN 12007-1:2012 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements |
| EN 12583:2014 | Gas Infrastructure - Compressor stations - Functional requirements |
| EN 12560-4:2001 | Flanges and their joints - Gaskets for Class-designated flantes - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges |
| EN 10289:2002 | Steel tubes and fittings for onshore and offshore pipelines - External liquid applied epoxy and epoxy-modified coatings |
| EN 12954:2001 | Cathodic protection of buried or immersed metallic structures - General principles and application for pipelines |
| EN 10301:2003 | Steel tubes and fittings for on and offshore pipelines - Internal coating for the reduction of friction for conveyance of non corrosive gas |
| ISO 13686:2013 | Natural gas Quality designation |
| EN 15001-2:2008 | Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance |
| ISO 15590-3:2004 | Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 3: Flanges |
| EN 1473:2016 | Installation and equipment for liquefied natural gas - Design of onshore installations |
| PREN 16348 : DRAFT 2011 | SAFETY MANAGEMENT SYSTEM (SMS) FOR GAS INFRASTRUCTURE AND PIPELINE INTEGRITY MANAGEMENT SYSTEM (PIMS) FOR GAS TRANSMISSION PIPELINES - FUNCTIONAL REQUIREMENTS |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| ISO 15590-2:2003 | Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 12068:1998 | Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 12007-2:2012 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar) |
| EN 12007-4:2012 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 4: Specific functional requirements for renovation |
| EN 1515-3:2005 | Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated |
| EN 1918-5:2016 | Gas infrastructure - Underground gas storage - Part 5: Functional recommendations for surface facilities |
| EN 14870-3:2006 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 3: Flanges (ISO 15590-3:2004, modified) |
| EN 14870-1:2011 | Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) |
| EN 14141:2013 | Valves for natural gas transportation in pipelines - Performance requirements and tests |
| EN 1776:2015 | Gas infrastructure - Gas measuring systems - Functional requirements |
| 1997/23/EC : 1997 | DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
| EN 12186:2014 | Gas infrastructure - Gas pressure regulating stations for transmission and distribution - Functional requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.