12/30266506 DC : 0
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 50583 - PHOTOVOLTAICS IN BUILDINGS
Available format(s)
Hardcopy , PDF
Superseded date
01-31-2016
Superseded by
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Labeling
6 Documentation and declaration of conformity
Annex A (normative) - Methods for determining
the uplift resistance of BIPV roof
elements and their snow-load-bearing
capability
Annex B (normative) - Rain-penetration test
Annex C (normative) - Further requirements on
PV modules that contain glass
Bibliography
BS EN 50583.
| Committee |
GEL/82
|
| DocumentType |
Draft
|
| Pages |
43
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 50583 : DRAFT 2012 | Identical |
| EN 14783:2013 | Fully supported metal sheet and strip for roofing, external cladding and internal lining - Product specification and requirements |
| IEC 60364-7-712:2017 | Low voltage electrical installations - Part 7-712: Requirements for special installations or locations - Solar photovoltaic (PV) power supply systems |
| EN 13947:2006 | Thermal performance of curtain walling - Calculation of thermal transmittance |
| EN 13116:2001 | Curtain walling - Resistance to wind load - Performance requirements |
| CLC/TS 61836:2009 | Solar photovoltaic energy systems - Terms, definitions and symbols |
| EN 673:2011 | Glass in building - Determination of thermal transmittance (U value) - Calculation method |
| EN 1096-4:2004 | Glass in building - Coated glass - Part 4: Evaluation of conformity/Product standard |
| EN 12758:2011 | Glass in building - Glazing and airborne sound insulation - Product descriptions and determination of properties |
| EN 410:2011 | Glass in building - Determination of luminous and solar characteristics of glazing |
| IEC 61215:2005 | Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval |
| EN 14782:2006 | Self-supporting metal sheet for roofing, external cladding and internal lining - Product specification and requirements |
| IEC 61730-2:2016 | Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
| IEC TS 61836:2007 | Solar photovoltaic energy systems - Terms, definitions and symbols |
| EN ISO 12543-2:2011 | Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) |
| EN 61646:2008 | THIN-FILM TERRESTRIAL PHOTOVOLTAIC (PV) MODULES - DESIGN QUALIFICATION AND TYPE APPROVAL |
| EN 61730-1:2007/A11:2014 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2004, MODIFIED) |
| ISO 12543-3:2011 | Glass in building Laminated glass and laminated safety glass Part 3: Laminated glass |
| EN 14500:2008 | Blinds and shutters - Thermal and visual comfort - Test and calculation methods |
| EN 13501-5:2016 | Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests |
| EN 62446:2009 | Grid connected photovoltaic systems – Minimum requirements for system documentation, commissioning tests and inspection |
| EN ISO 12543-3:2011 | Glass in building - Laminated glass and laminated safety glass - Part 3: Laminated glass (ISO 12543-3:2011) |
| EN 13501-2:2016 | Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
| EN 14179-2:2005 | Glass in building - Heat soaked thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
| ISO 12543-2:2011 | Glass in building Laminated glass and laminated safety glass Part 2: Laminated safety glass |
| EN 12519:2004 | Windows and pedestrian doors - Terminology |
| EN ISO 6946:2017 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
| EN 1279-3:2002 | Glass in building - Insulating glass units - Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances |
| IEC 61646:2008 | Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval |
| CEN/TR 15601:2012 | Hygrothermal performance of buildings - Resistance to wind - driven rain of roof coverings with discontinuously laid small elements - Test methods |
| EN 572-9:2004 | Glass in building - Basic soda lime silicate glass products - Part 9: Evaluation of conformity/Product standard |
| EN 1279-4:2002 | Glass in building - Insulating glass units - Part 4: Methods of test for the physical attributes of edge seals |
| EN 1863-2:2004 | Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard |
| EN 61730-2:2007/A1:2012 | PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2004/A1:2011) |
| EN 674:2011 | Glass in building - Determination of thermal transmittance (U value) - Guarded hot plate method |
| EN 12150-2:2004 | Glass in building - Thermally toughened soda lime silicate safety glass - Part 2: Evaluation of conformity/Product standard |
| IEC 61730-1:2016 | Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction |
| EN 1279-5:2005+A2:2010 | Glass in building - Insulating glass units - Part 5: Evaluation of conformity |
| EN 13830:2015 | Curtain walling - Product standard |
| HD 60364-7-712:2016 | Low-voltage electrical installations - Part 7-712: Requirements for special installations or locations - Photovoltaic (PV) systems |
| ISO 12543-1:2011 | Glass in building Laminated glass and laminated safety glass Part 1: Definitions and description of component parts |
| EN 12179:2000 | Curtain walling - Resistance to wind load - Test method |
| EN 675:2011 | Glass in building - Determination of thermal transmittance (U value) - Heat flow meter method |
| EN 1279-2:2002 | Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration |
| IEC 62446:2009 | Grid connected photovoltaic systems - Minimum requirements for system documentation, commissioning tests and inspection |
| EN 13119:2016 | Curtain walling - Terminology |
| ISO 12543-4:2011 | Glass in building Laminated glass and laminated safety glass Part 4: Test methods for durability |
| EN ISO 12543-4:2011 | Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:2011) |
| ISO 12543-6:2011 | Glass in building Laminated glass and laminated safety glass Part 6: Appearance |
| EN 14351-1:2006+A2:2016 | Windows and doors - Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets |
| EN ISO 12543-5:2011 | Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2011) |
| EN 13956:2012 | Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics |
| ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
| EN 50380:2017 | Marking and documentation requirements for Photovoltaic Modules |
| ISO 12543-5:2011 | Glass in building Laminated glass and laminated safety glass Part 5: Dimensions and edge finishing |
| EN 61215:2005 | Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval |
| EN ISO 12543-1:2011 | Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:2011) |
| EN 12600:2002 | Glass in building - Pendulum test - Impact test method and classification for flat glass |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.