12/30257889 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 206 - CONCRETE - SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
Hardcopy , PDF
12-31-2013
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions, symbols and abbreviations
4 Classification
5 Requirements for concrete and methods of verification
6 Specification of concrete
7 Delivery of fresh concrete
8 Conformity control and conformity criteria
9 Production control
10 Evaluation of conformity
11 Designation for designed concrete
Annex A (normative) - Initial test
Annex B (normative) - Identity testing
Annex C (normative) - Provisions for assessment,
surveillance and certification of production
control
Annex D (normative) - Additional requirements for
concrete for special geotechnical works
Annex F (informative) - Recommendation for limiting
values of concrete composition
Annex G (informative) - Guidelines for self-compacting
concrete requirements in the fresh state
Annex K (informative) - Concrete families
Bibliography
BS EN 206
| Committee |
B/517/1
|
| DocumentType |
Draft
|
| Pages |
88
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 206 : DRAFT 2012 | Identical |
| EN 12390-8:2009 | Testing hardened concrete - Part 8: Depth of penetration of water under pressure |
| CR 13902:2000 | Test methods for determining the water/cement ratio of fresh concrete |
| EN 196-2:2013 | Method of testing cement - Part 2: Chemical analysis of cement |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| ISO 7980:1986 | Water quality Determination of calcium and magnesium Atomic absorption spectrometric method |
| CR 13901:2000 | The use of the concept of concrete families for the production and conformity control of concrete |
| EN 12504-3:2005 | Testing concrete in structures - Part 3: Determination of pull-out force |
| EN 12350-2:2009 | Testing fresh concrete - Part 2: Slump-test |
| EN 12350-9:2010 | Testing fresh concrete - Part 9: Self-compacting concrete - V-funnel test |
| EN 12350-6:2009 | Testing fresh concrete - Part 6: Density |
| ISO 3951:1989 | Sampling procedures and charts for inspection by variables for percent nonconforming |
| DIN 4030-2:2008-06 | Assessment of water, soil and gases for their aggressiveness to concrete - Part 2: Sampling and analysis of water and soil samples |
| EN 13263-1:2005+A1:2009 | Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria |
| EN 12390-7:2009 | Testing hardened concrete - Part 7: Density of hardened concrete |
| PREN 13055 : DRAFT 2012 | LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR, GROUT, BITUMINOUS MIXTURES, SURFACE TREATMENTS AND FOR UNBOUND AND BOUND APPLICATIONS |
| EN 12390-5:2009 | Testing hardened concrete - Part 5: Flexural strength of test specimens |
| EN 15743:2010+A1:2015 | Supersulfated cement - Composition, specifications and conformity criteria |
| PREN 12620 : DRAFT 2015 | AGGREGATES FOR CONCRETE |
| EN 12350-12:2010 | Testing fresh concrete - Part 12: Self-compacting concrete - J-ring test |
| EN 1097-3:1998 | Tests for mechanical and physical properties of aggregates - Part 3: Determination of loose bulk density and voids |
| EN 1008:2002 | Mixing water for concrete - Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
| EN 12504-2:2012 | Testing concrete in structures - Part 2: Non-destructive testing - Determination of rebound number |
| EN 12350-11:2010 | Testing fresh concrete - Part 11: Self-compacting concrete - Sieve segregation test |
| EN 933-1:2012 | Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method |
| EN 14889-2:2006 | Fibres for concrete - Part 2: Polymer fibres - Definitions, specifications and conformity |
| EN 12350-5:2009 | Testing fresh concrete - Part 5: Flow table test |
| EN 14721:2005+A1:2007 | Test method for metallic fibre concrete - Measuring the fibre content in fresh and hardened concrete |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 12390-4:2000 | Testing hardened concrete - Part 4: Compressive strength - Specification for testing machines |
| EN 12350-8:2010 | Testing fresh concrete - Part 8: Self-compacting concrete - Slump-flow test |
| EN 14889-1:2006 | Fibres for concrete - Part 1: Steel fibres - Definitions, specifications and conformity |
| EN 14216:2015 | Cement - Composition, specifications and conformity criteria for very low heat special cements |
| EN 12390-1:2012 | Testing hardened concrete - Part 1: Shape, dimensions and other requirements for specimens and moulds |
| EN 12504-4:2004 | Testing concrete - Part 4: Determination of ultrasonic pulse velocity |
| EN 12350-4:2009 | Testing fresh concrete - Part 4: Degree of compactability |
| EN 12390-2:2009 | Testing hardened concrete - Part 2: Making and curing specimens for strength tests |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 14488-7:2006 | Testing sprayed concrete - Part 7: Fibre content of fibre reinforced concrete |
| EN 450-1:2012 | Fly ash for concrete - Part 1: Definition, specifications and conformity criteria |
| EN 15167-1:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 1: Definitions, specifications and conformity criteria |
| EN 12350-1:2009 | Testing fresh concrete - Part 1: Sampling |
| EN 1097-6:2013 | Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption |
| ISO 4316:1977 | Surface active agents — Determination of pH of aqueous solutions — Potentiometric method |
| ISO 7150-2:1986 | Water quality Determination of ammonium Part 2: Automated spectrometric method |
| EN 12390-6:2009 | Testing hardened concrete - Part 6: Tensile splitting strength of test specimens |
| EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test |
| EN 12350-7:2009 | Testing fresh concrete - Part 7: Air content - Pressure methods |
| ISO 7150-1:1984 | Water quality — Determination of ammonium — Part 1: Manual spectrometric method |
| EN 12504-1:2009 | Testing concrete in structures - Part 1: Cored specimens - Taking, examining and testing in compression |
| EN 13577:2007 | Chemical attack on concrete - Determination of aggressive carbon dioxide content in water |
| EN 13670:2009 | Execution of concrete structures |
| CEN/TR 16349:2012 | Framework for a specification on the avoidance of a damaging Alkali-Silica Reaction (ASR) in concrete |
| EN 12350-10:2010 | Testing fresh concrete - Part 10: Self-compacting concrete - L box test |
| EN 934-2:2009+A1:2012 | Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling |
| EN 13791:2007 | Assessment of in-situ compressive strength in structures and precast concrete components |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.